Outdoor Fan Installation Cost in Arizona
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest Arizona metro
$799
Phoenix
Statewide median
$948
Across 10 Arizona cities
Most expensive Arizona metro
$967
Scottsdale
Outdoor Fan Installation — City-by-City Total
Open national calculator →| City | Cost multiplier | Typical project total | Detail |
|---|---|---|---|
| Phoenix | 0.58× | $799 | Open → |
| Tucson | 0.91× | $925 | Open → |
| Mesa | 0.95× | $941 | Open → |
| Chandler | 0.96× | $944 | Open → |
| Glendale | 0.97× | $948 | Open → |
| Surprise | 0.97× | $948 | Open → |
| Peoria | 0.98× | $952 | Open → |
| Gilbert | 1.00× | $960 | Open → |
| Tempe | 1.01× | $963 | Open → |
| Scottsdale | 1.02× | $967 | Open → |
All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for Arizona.
Typical Project Cost by Fan type
Adjusted for Phoenix, AZ (-42%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per fan |
|---|---|---|---|
| Damp-rated standard | — | $699 | $349 |
| Wet-rated 52-inch | — | $799 | $399 |
| Wet-rated 60-inch with light | $348 | $1,097 | $548 |
| Smart Wi-Fi wet-rated | $547 | $1,495 | $747 |
| Premium oversized 72-inch | $846 | $2,093 | $1,046 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Phoenix, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 10 cities we cover.
Local Labor Rates Near Arizona
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (AZ) | vs national | Loaded billing rate |
|---|---|---|---|---|
| CarpentersMost relevant | 47-2031 | $25.34 | -12.5% | ~$61/hr |
| Electricians | 47-2111 | $30.94 | -3.9% | ~$74/hr |
| Plumbers & Pipefitters | 47-2152 | $28.24 | -14.0% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $26.71 | -6.8% | ~$64/hr |
| Painters | 47-2141 | $21.83 | -11.9% | ~$52/hr |
| Roofers | 47-2181 | $21.07 | -18.6% | ~$51/hr |
| Construction Laborers | 47-2061 | $21.12 | -7.3% | ~$51/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Decks, fences, pergolas in Arizona
Derived from NOAA climate normals for AZ: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Pressure-treated and composite materials install best in dry, mild conditions. Very hot, dry summers with intense UV exposure concentrates these conditions in the months above.
Booking tip
Book in winter for early-spring installs — many builders offer pre-season discounts on deposits.
Recommendations derived from Arizona's climate profile (IECC zone 2B-3B, ~0 freeze months, 14" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.