Window Tinting Cost in Delaware
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest Delaware metro
$1,020
Wilmington
Statewide median
$1,020
Across 1 Delaware cities
Most expensive Delaware metro
$1,020
Wilmington
Window Tinting — City-by-City Total
Open national calculator →| City | Cost multiplier | Typical project total | Detail |
|---|---|---|---|
| Wilmington | 0.97× | $1,020 | Open → |
All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for Delaware.
Typical Project Cost by Film Type
Adjusted for Wilmington, DE (-3%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Basic Dyed | $4.97 | $811 | $8 |
| Carbon Film | $6.96 | $1,020 | $10 |
| Ceramic | $9.95 | $1,334 | $13 |
| Metalized Solar | $8.96 | $1,230 | $12 |
| Security Film | — | $1,543 | $15 |
| Decorative / Frosted | $7.96 | $1,125 | $11 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Wilmington, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 1 cities we cover.
Local Labor Rates Near Delaware
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (DE) | vs national | Loaded billing rate |
|---|---|---|---|---|
| CarpentersMost relevant | 47-2031 | $26.83 | -7.4% | ~$64/hr |
| Electricians | 47-2111 | $31.45 | -2.4% | ~$75/hr |
| Plumbers & Pipefitters | 47-2152 | $32.41 | -1.3% | ~$78/hr |
| HVAC Mechanics | 49-9021 | $27.85 | -2.8% | ~$67/hr |
| Painters | 47-2141 | $22.91 | -7.5% | ~$55/hr |
| Roofers | 47-2181 | $23.65 | -8.6% | ~$57/hr |
| Construction Laborers | 47-2061 | $21.46 | -5.8% | ~$52/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Windows & exterior doors in Delaware
Derived from NOAA climate normals for DE: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Replacing windows in extreme conditions exposes the home interior to the outside for hours. With 3 freeze months and 1300 cooling degree days, mild months are easier on HVAC and on the install crew.
Booking tip
If you must replace in winter, ask for a one-room-at-a-time install plan to limit heat loss.
Recommendations derived from Delaware's climate profile (IECC zone 4A, ~3 freeze months, 45" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.