Retaining Wall Cost in Georgia
City-by-city comparison for the same default project size (120 sq ft), priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest Georgia metro
$7,192
Macon
Statewide median
$7,235
Across 4 Georgia cities
Most expensive Georgia metro
$7,364
Atlanta
Retaining Wall — City-by-City Total
Open national calculator →| City | Cost multiplier | Typical project total | Detail |
|---|---|---|---|
| Macon | 0.80× | $7,192 | Open → |
| Augusta | 0.83× | $7,221 | Open → |
| Savannah | 0.86× | $7,249 | Open → |
| Atlanta | 0.98× | $7,364 | Open → |
All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for Georgia.
Typical Project Cost by Wall Material
Adjusted for Atlanta, GA (-2%)Same default project size (120 sq ft), priced across each material tier.
| Tier | Material rate | Total project | Installed per lf |
|---|---|---|---|
| Pressure-Treated Timber | $21.89 | $4,976 | $124 |
| Segmental Block Wall | $41.79 | $7,364 | $184 |
| Premium Block / Stone-Look | $57.71 | $9,274 | $232 |
| Engineered Concrete System | $84.58 | $12,499 | $312 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Atlanta, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 4 cities we cover.
Local Labor Rates Near Georgia
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (GA) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $19.78 | -20.2% | ~$47/hr |
| RoofersMost relevant | 47-2181 | $22.10 | -14.6% | ~$53/hr |
| Electricians | 47-2111 | $26.96 | -16.3% | ~$65/hr |
| Plumbers & Pipefitters | 47-2152 | $26.46 | -19.4% | ~$64/hr |
| HVAC Mechanics | 49-9021 | $24.35 | -15.0% | ~$58/hr |
| Carpenters | 47-2031 | $22.84 | -21.1% | ~$55/hr |
| Construction Laborers | 47-2061 | $18.65 | -18.2% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Georgia
Derived from NOAA climate normals for GA: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Long humid summers and mild winters with frequent thunderstorms narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Recommendations derived from Georgia's climate profile (IECC zone 3A, ~1 freeze months, 50" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.