Generator Installation Cost in Nebraska
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest Nebraska metro
$6,843
Lincoln
Statewide median
$6,868
Across 2 Nebraska cities
Most expensive Nebraska metro
$6,893
Omaha
Generator Installation — City-by-City Total
Open national calculator →All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for Nebraska.
Typical Project Cost by Generator Type
Adjusted for Omaha, NE (-21%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per kw |
|---|---|---|---|
| Portable hookup + transfer switch | — | $4,604 | $230 |
| Standby 10–14 kW | $3,483 | $6,893 | $345 |
| Standby 16–22 kW | $4,975 | $8,385 | $419 |
| Standby 24–48 kW whole-house | $8,458 | $11,868 | $593 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Omaha, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 2 cities we cover.
Local Labor Rates Near Nebraska
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (NE) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $30.36 | -5.7% | ~$73/hr |
| Plumbers & Pipefitters | 47-2152 | $28.02 | -14.7% | ~$67/hr |
| HVAC Mechanics | 49-9021 | $25.43 | -11.3% | ~$61/hr |
| Carpenters | 47-2031 | $24.30 | -16.1% | ~$58/hr |
| Painters | 47-2141 | $19.85 | -19.9% | ~$48/hr |
| Roofers | 47-2181 | $20.50 | -20.8% | ~$49/hr |
| Construction Laborers | 47-2061 | $21.55 | -5.4% | ~$52/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Nebraska
Derived from NOAA climate normals for NE: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Recommendations derived from Nebraska's climate profile (IECC zone 5A, ~5 freeze months, 24" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.