Home Automation System Cost in New Mexico
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest New Mexico metro
$2,564
Albuquerque
Statewide median
$2,564
Across 1 New Mexico cities
Most expensive New Mexico metro
$2,564
Albuquerque
Home Automation System — City-by-City Total
Open national calculator →| City | Cost multiplier | Typical project total | Detail |
|---|---|---|---|
| Albuquerque | 0.89× | $2,564 | Open → |
All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for New Mexico.
Typical Project Cost by Automation hub grade
Adjusted for Albuquerque, NM (-11%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| DIY: SmartThings / Hubitat | $99.5 | $2,315 | $0 |
| Mid: Home Assistant on dedicated hardware | $348 | $2,564 | $0 |
| Pro: Control4 EA1 / equivalent | — | $3,709 | $0 |
| Premium: Control4 EA5 / Crestron | $4,478 | $6,694 | $0 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Albuquerque, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 1 cities we cover.
Local Labor Rates Near New Mexico
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (NM) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $27.52 | -14.6% | ~$66/hr |
| Plumbers & Pipefitters | 47-2152 | $26.41 | -19.6% | ~$63/hr |
| HVAC Mechanics | 49-9021 | $24.72 | -13.7% | ~$59/hr |
| Carpenters | 47-2031 | $23.30 | -19.5% | ~$56/hr |
| Painters | 47-2141 | $19.52 | -21.2% | ~$47/hr |
| Roofers | 47-2181 | $20.18 | -22.0% | ~$48/hr |
| Construction Laborers | 47-2061 | $19.20 | -15.8% | ~$46/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in New Mexico
Derived from NOAA climate normals for NM: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Recommendations derived from New Mexico's climate profile (IECC zone 3B-5B, ~3 freeze months, 13" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.