Heat Pump Installation Cost in Oklahoma
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest Oklahoma metro
$7,738
Tulsa
Statewide median
$7,759
Across 2 Oklahoma cities
Most expensive Oklahoma metro
$7,780
Oklahoma City
Heat Pump Installation — City-by-City Total
Open national calculator →All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for Oklahoma.
Typical Project Cost by Heat Pump Type
Adjusted for Oklahoma City, OK (-21%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Air-source — standard | $4,478 | $7,780 | $4 |
| Air-source — high-efficiency | $6,965 | $10,267 | $5 |
| Dual-fuel hybrid | $8,458 | $11,760 | $6 |
| Geothermal | — | $18,227 | $9 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Oklahoma City, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 2 cities we cover.
Local Labor Rates Near Oklahoma
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (OK) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $25.85 | -19.7% | ~$62/hr |
| HVAC MechanicsMost relevant | 49-9021 | $22.94 | -20.0% | ~$55/hr |
| Plumbers & Pipefitters | 47-2152 | $25.42 | -22.6% | ~$61/hr |
| Carpenters | 47-2031 | $21.40 | -26.1% | ~$51/hr |
| Painters | 47-2141 | $19.10 | -22.9% | ~$46/hr |
| Roofers | 47-2181 | $19.30 | -25.4% | ~$46/hr |
| Construction Laborers | 47-2061 | $17.95 | -21.2% | ~$43/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule HVAC install or replacement in Oklahoma
Derived from NOAA climate normals for OK: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
HVAC pricing follows demand. With 2000 cooling and 3500 heating degree days, the worst months are when the system you're replacing is failing across the metro at once.
Booking tip
Plan replacement before peak season — late summer for furnaces, mid-spring for AC. Off-peak months can save 10–25% on labor.
Recommendations derived from Oklahoma's climate profile (IECC zone 3A-4A, ~2 freeze months, 37" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.