Shutters Installation Cost in South Dakota
City-by-city comparison for the same default project size, priced with BLS metro CPI where available and a regional model elsewhere. Use the table to gauge how much your ZIP code alone will move the quote.
Cheapest South Dakota metro
$2,048
Rapid City
Statewide median
$2,054
Across 2 South Dakota cities
Most expensive South Dakota metro
$2,060
Sioux Falls
Shutters Installation — City-by-City Total
Open national calculator →| City | Cost multiplier | Typical project total | Detail |
|---|---|---|---|
| Rapid City | 0.79× | $2,048 | Open → |
| Sioux Falls | 0.81× | $2,060 | Open → |
All totals priced with the calculator's default scope. To re-run for your specific project size, open the city link in the right column. Local labor wages and seasonality (below) are pulled from BLS OEWS and NOAA climate normals for South Dakota.
Typical Project Cost by Shutter Type
Adjusted for Sioux Falls, SD (-19%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per window |
|---|---|---|---|
| Interior Wood Plantation | $24.88 | $3,111 | $389 |
| Interior Vinyl Plantation | — | $2,060 | $258 |
| Interior Composite | — | $2,585 | $323 |
| Exterior Vinyl Decorative | — | $1,744 | $218 |
| Exterior Wood Functional | $29.85 | $3,636 | $454 |
| Exterior Aluminum Hurricane | $44.77 | $5,211 | $651 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Tier table priced for Sioux Falls, the state's largest metro by population. Per-city totals in the table above use the same default scope across the 2 cities we cover.
Local Labor Rates Near South Dakota
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (SD) | vs national | Loaded billing rate |
|---|---|---|---|---|
| CarpentersMost relevant | 47-2031 | $22.74 | -21.5% | ~$55/hr |
| Electricians | 47-2111 | $27.42 | -14.9% | ~$66/hr |
| Plumbers & Pipefitters | 47-2152 | $26.75 | -18.5% | ~$64/hr |
| HVAC Mechanics | 49-9021 | $24.60 | -14.2% | ~$59/hr |
| Painters | 47-2141 | $19.10 | -22.9% | ~$46/hr |
| Roofers | 47-2181 | $19.85 | -23.3% | ~$48/hr |
| Construction Laborers | 47-2061 | $19.85 | -12.9% | ~$48/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Windows & exterior doors in South Dakota
Derived from NOAA climate normals for SD: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Replacing windows in extreme conditions exposes the home interior to the outside for hours. With 5 freeze months and 800 cooling degree days, mild months are easier on HVAC and on the install crew.
Booking tip
If you must replace in winter, ask for a one-room-at-a-time install plan to limit heat loss.
Recommendations derived from South Dakota's climate profile (IECC zone 5A-6A, ~5 freeze months, 22" annual precipitation).
About this comparison
Project totals on this page use the calculator's default size and tier — they are designed for inter-city comparison, not as a quote. Pricing is built from the BLS residential construction PPI for materials and labor, with regional and direct metro CPI applied to capture local cost-of-living differences. Read the full methodology for source detail.