HC
HomeCostCalc.com

Cabinet Installation Cost in Pembroke Pines, FL2026

Estimate cabinet installation cost in Pembroke Pines, FL with local labor and material pricing. Compare stock, semi-custom, and custom cabinets with demolition, trim, and hardware instantly.

Project Details

Total Estimated Cost

$11,886

Adjusted for local cost of living (-7%)

Cost Breakdown

Cabinet Boxes & Doors$7,656
Hardware & Organizers$847
Panels, Trim & Finish Carpentry$838
Demolition & Haul-Off$431
Installation Labor$2,114
Installed Cost per Linear Foot$495

Cost Distribution

Cabinet Boxes & Doors (64%)
Hardware & Organizers (7%)
Panels, Trim & Finish Carpentry (7%)
Demolition & Haul-Off (4%)
Installation Labor (18%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Pembroke Pines, FL) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Typical Project Cost by Cabinet Package

Adjusted for Pembroke Pines, FL (-7%)

Same default project size (default scope), priced across each material tier.

TierMaterial rateTotal projectInstalled per lf
Stock / RTA Cabinets$179$8,526$355
Semi-Custom Cabinets$319$11,886$495
Custom Painted Cabinets$518$16,662$694
Premium Custom / Designer Cabinets$847$24,558$1,023

Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.

Recent Cost Trends Affecting Pembroke Pines

Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.

Residential Construction PPI — Trailing 12 Months

BLS series PCU236211236211, single-family construction producer prices.

200.6

+4.0% vs May 25

192194197199202192.9200.6May 25Jul 25Sep 25Nov 25Jan 26Mar 26

The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.

Local Labor Rates Near Pembroke Pines, FL

State-level mean hourly wages from BLS OEWS, May 2023.

TradeSOCMean hourly (FL)vs nationalLoaded billing rate
Plumbers & PipefittersMost relevant47-2152$25.51-22.3%~$61/hr
CarpentersMost relevant47-2031$22.94-20.8%~$55/hr
Electricians47-2111$26.19-18.7%~$63/hr
HVAC Mechanics49-9021$24.18-15.6%~$58/hr
Painters47-2141$20.52-17.2%~$49/hr
Roofers47-2181$21.33-17.6%~$51/hr
Construction Laborers47-2061$18.24-20.0%~$44/hr

"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.

Best Months to Schedule Interior painting in Pembroke Pines, FL

Derived from NOAA climate normals for FL: heating/cooling degree days, freeze months, and annual precipitation.

Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec

Why these months

Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.

Booking tip

Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.

Cabinet Installation Cost by City

Browse all 202 cities by state
National Average

Alaska

Delaware

District of Columbia

Hawaii

Idaho

Maryland

Massachusetts

Mississippi

Nebraska

New Hampshire

New Mexico

North Dakota

Rhode Island

Vermont

West Virginia

Wyoming

Local Market Context for Pembroke Pines, FL

This Pembroke Pines page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

7% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

South · 171K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Average Cost in Pembroke Pines, FL

For a typical cabinet installation scenario in Pembroke Pines, FL, this calculator currently models a total around $11,886, or about $495 per linear foot.

When budgeting Cabinet Installation in Pembroke Pines, local quotes usually reflect conditions across Florida. Year-round construction activity in Florida keeps crews busy but also means scheduling competition across most trades.

Pembroke Pines pricing still tracks South labor signals, even when the local contractor pool is smaller.

In Pembroke Pines, finish level and tile or cabinet lead times can swing totals as much as labor, especially during busy seasons.

Pembroke Pines's climate (hot, humid year-round with strict hurricane wind ratings) sets the seasonal backdrop for most home-improvement scopes around Pembroke Pines, FL.

About 37% of homes in Florida were built after 2000, so Pembroke Pines projects often work with newer hurricane-rated single-family construction and standardized rough-in details.

In Pembroke Pines, modeled costs are currently about 7% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader south regional cost pressure.

Cabinet installation in Pembroke Pines usually depends on cabinet tier, layout complexity, and how much trim, panel, and demolition work is needed before the room can be reset cleanly.

Low / Mid / High Project Scenarios

Low Scenario

$3,291

$274 per linear foot

A compact stock-cabinet install in a small kitchen with little trim and no demolition.

Mid Scenario

$11,916

$497 per linear foot

A typical semi-custom cabinet replacement with standard trim, hardware, and demo.

High Scenario

$43,872

$1,155 per linear foot

A larger custom cabinet project with complex layout, premium hardware, and heavy demo.

What Changes the Estimate Most in Pembroke Pines?

  • Cabinet tier is usually the biggest driver, with stock, semi-custom, and full custom systems sitting in very different budget ranges.
  • Layout complexity matters because islands, pantry towers, fillers, and appliance panels create much more labor than a simple straight run.
  • Trim, hardware, and demolition are the main reasons cabinet-replacement quotes climb beyond the base box price.

When This Calculator Is Less Accurate

This calculator is less accurate when the project includes wall relocation, structural framing changes, custom millwork beyond standard cabinets, or major drywall, flooring, and finish repairs after demolition.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Cabinet Installation Cost in Pembroke Pines?

New kitchen cabinet installation often costs about $250-1,100 per linear foot installed, depending on cabinet tier, layout complexity, finish carpentry, hardware upgrades, and whether old cabinets have to be removed first. Stock and RTA kitchens stay near the lower end, while custom painted cabinetry with organizer upgrades and decorative trim can push the budget much higher.

Cost Factors:

  • Cabinet tier is usually the biggest driver because stock, semi-custom, and custom boxes sit in very different price classes
  • Layout complexity matters because corners, islands, tall pantry units, fillers, and appliance panels create more install time than a simple straight run
  • Hardware and organizer upgrades can add meaningful cost once soft-close drawers, pull-outs, and premium pulls enter the scope
  • Finish carpentry often gets underestimated; end panels, crown, light rail, and trim details add both materials and labor
  • Demolition and wall touch-up can materially increase the total when an old kitchen has to come out cleanly before new cabinets go in

In Pembroke Pines, home improvement costs are 7% below the national average. This reflects local labor rates, material availability, and cost of living in the Pembroke Pines metro area.

Frequently Asked Questions (5)
How localized is the Cabinet Installation estimate for Pembroke Pines, FL?

This page applies a South regional cost model plus local signals for Pembroke Pines, FL, so totals are modeled around 7% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Pembroke Pines?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Florida codes and local inspection steps can change both price and schedule compared with national averages.

How much does cabinet installation cost?

Many cabinet installation projects land around $250-1,100 per linear foot installed, depending on whether you choose stock, semi-custom, or custom cabinetry. Labor, demolition, trim details, and hardware upgrades all move the final price.

What is more expensive: cabinet refacing or new cabinets?

New cabinets are usually more expensive because you are paying for new boxes, doors, trim, and a full installation instead of reusing the existing cabinet boxes. Refacing can still become costly when you choose premium fronts and accessory upgrades, but full replacement is generally the bigger investment.

How do contractors price kitchen cabinets?

Many estimates use cabinet linear footage as a quick planning metric, then adjust for cabinet tier, layout shape, trim details, panels, organizer packages, and labor. Final quotes usually become more exact once a detailed cabinet plan and appliance layout are confirmed.

Data sources & methodology

Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.

Read the full methodology →