Cabinet Refacing Cost in Arlington, TX2026
Estimate cabinet refacing cost in Arlington, TX with local labor and material pricing. Compare door styles, veneer finishes, hardware, and upgrade packages instantly.
Project Details
Total Estimated Cost
$7,064
Adjusted for local cost of living (-9%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Arlington, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Door & Drawer Style
Adjusted for Arlington, TX (-9%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per lf |
|---|---|---|---|
| Basic Slab / Thermofoil | — | $5,624 | $234 |
| Shaker / Painted MDF | — | $7,064 | $294 |
| Wood Veneer / Stained | $259 | $8,984 | $374 |
| Premium Wood / Designer Fronts | $358 | $11,360 | $473 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Arlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Arlington, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Plumbers & PipefittersMost relevant | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| CarpentersMost relevant | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Electricians | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Painters | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Arlington, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Cabinet Refacing Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Arlington, TX
This Arlington page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
9% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 394K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Cabinet Refacing cost in Corpus Christi
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Compare Cabinet Refacing pricing in Plano, TX
Texas market · smaller metro · 94 cost index · ~3% higher than Arlington
Lubbock cabinet refacing estimates
Texas market · smaller metro · 78 cost index · ~13% lower than Arlington
How much cabinet refacing costs in Irving
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Cabinet Refacing prices around Laredo
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Garland, TX cabinet refacing budget
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Local cabinet refacing estimate for Frisco
Texas market · smaller metro · 93 cost index · ~2% higher than Arlington
Cabinet Refacing near Amarillo
Texas market · smaller metro · 79 cost index · ~12% lower than Arlington
Average Cost in Arlington, TX
For a typical cabinet refacing scenario in Arlington, TX, this calculator currently models a total around $7,064, or about $294 per linear foot.
When budgeting Cabinet Refacing in Arlington, local quotes usually reflect conditions across Texas. Texas markets often see hail, heat, and wide seasonal demand swings that can tighten exterior crew schedules.
Contractors serving Arlington often balance local jobs with regional work, which can affect how quickly crews can start.
Kitchen and bath remodels near Arlington, TX usually move the most when layout changes, plumbing venting, or electrical circuits enter the scope.
Local conditions in Arlington, TX include long, hot summers and short, mild winters with strong storm exposure, which often shows up in material choices and scheduling.
Arlington's newer housing profile (newer single-family with slab foundations and storm-rated roofing) usually means fewer surprises behind the walls than in older Northeast and Midwest stock.
In Arlington, modeled costs are currently about 9% below the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Cabinet refacing in Arlington tends to swing with front style, finish package, and how much prep the existing cabinet boxes need before new surfaces can go on.
Low / Mid / High Project Scenarios
Low Scenario
$3,138$196 per linear foot
Small kitchen refacing with basic slab fronts and reused hardware.
Mid Scenario
$7,890$329 per linear foot
Typical shaker-style refacing package with standard hardware.
High Scenario
$22,823$634 per linear foot
Large premium refacing project with upgraded fronts and accessories.
What Changes the Estimate Most in Arlington?
- Door style and finish package usually create the biggest price spread.
- Cabinet box condition matters because extra prep or repairs can change labor quickly.
- Hardware and accessory upgrades can push a refacing project much closer to replacement pricing than expected.
When This Calculator Is Less Accurate
This calculator is less accurate when cabinet boxes are out of square, damaged by moisture, or need custom carpentry beyond standard refacing.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Cabinet Refacing Cost in Arlington?
Cabinet refacing usually costs about $180-500 per linear foot, depending on door style, veneer finish, hardware, and how much prep the existing cabinet boxes need. It is often cheaper than full cabinet replacement, but premium fronts and accessories can still push the budget up quickly.
Cost Factors:
- Door style — slab and simple shaker fronts stay cheaper than premium wood or designer profiles
- Cabinet condition — refacing works best when the cabinet boxes are structurally sound and fairly square
- Hardware — pulls, hinges, and soft-close upgrades can add a noticeable premium
- Accessories — pull-outs, drawer upgrades, and organizer packages often sit outside the base refacing price
- Labor — careful alignment, finish work, and site conditions can materially change the install time
In Arlington, home improvement costs are 9% below the national average. This reflects local labor rates, material availability, and cost of living in the Arlington metro area.
Frequently Asked Questions (5)
How localized is the Cabinet Refacing estimate for Arlington, TX?
This page applies a South regional cost model plus local signals for Arlington, TX, so totals are modeled around 9% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Arlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does cabinet refacing cost?
Cabinet refacing often costs about $180-500 per linear foot, depending on the front style, finish material, prep requirements, and upgrade package. It is usually cheaper than full replacement when the cabinet boxes are still in good shape.
Is refacing cheaper than replacing cabinets?
Usually yes, especially when the layout stays the same and the cabinet boxes are worth keeping. Replacement becomes more attractive when the boxes are damaged, the layout is changing, or you want a very different storage configuration.
How long does cabinet refacing take?
Many refacing jobs take a few days to a week, depending on kitchen size, field conditions, and whether hardware, drawer upgrades, or other finish work are included.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching cabinet refacing in Arlington.
Refacing vs full kitchen remodel
Kitchen Remodel Cost Calculator
Useful when deciding whether refreshing the cabinet fronts is enough or a full remodel makes more sense.
Cabinets plus backsplash refresh
Backsplash Installation Cost Calculator
Compare two highly visible finish upgrades that are often done together in the same kitchen.
Finish the rest of the room
Interior Painting Cost Calculator
Helpful when cabinet refacing is part of a broader cosmetic kitchen update.
Related Calculators
Kitchen Remodel Cost Calculator
Estimate kitchen renovation costs from budget refresh to luxury remodel.
Backsplash Installation Cost Calculator
Estimate backsplash installation costs by tile type, pattern complexity, and wall area.
Interior Painting Cost Calculator
Estimate interior painting costs including paint, supplies, and labor.