Chimney Sweep Cost in Provo, UT2026
Estimate chimney sweep cost in Provo, UT with local labor and service pricing. Compare CSIA Level 1/2/3 inspections, fireplace vs wood stove, flue count, creosote cleanup, and camera scans instantly.
In Provo, UT, chimney sweep typically costs between $236 and $2,580 as of August 2026, or about $25 per linear foot for a typical project, based on BLS labor data and producer price indexes adjusted for local metro pricing.
Pricing data updated · Sources: BLS OEWS, BLS PPI, FRED, U.S. Census
Project Details
Total Estimated Cost
$501
Adjusted for local cost of living (-4%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Provo, UT) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: August 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by CSIA Sweep / Inspection Level
Adjusted for Provo, UT (-4%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per lf |
|---|---|---|---|
| Level 1 Sweep & Visual Check | $175 | $449 | $22 |
| Level 1 Sweep + Basic Inspection | $220 | $501 | $25 |
| Level 2 Sweep & Inspection | $360 | $662 | $33 |
| Level 3 Invasive Inspection | $649 | $994 | $50 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Provo
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.9
+2.8% vs Jul 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Provo, UT
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (UT) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Construction LaborersMost relevant | 47-2061 | $21.30 | -6.5% | ~$51/hr |
| Electricians | 47-2111 | $30.20 | -6.2% | ~$72/hr |
| Plumbers & Pipefitters | 47-2152 | $29.85 | -9.1% | ~$72/hr |
| HVAC Mechanics | 49-9021 | $26.94 | -6.0% | ~$65/hr |
| Carpenters | 47-2031 | $25.10 | -13.3% | ~$60/hr |
| Painters | 47-2141 | $21.58 | -12.9% | ~$52/hr |
| Roofers | 47-2181 | $22.40 | -13.4% | ~$54/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Provo, UT
Derived from NOAA climate normals for UT: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Cold, dry winters and hot, dry summers narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Chimney Sweep Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Provo, UT
This Provo page currently uses modeled local pricing based on west regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
4% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
West · 115K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Chimney Sweep cost in Ogden
Utah market · smaller metro · 93 cost index · ~3% lower than Provo
Compare Chimney Sweep pricing in Salt Lake City, UT
Utah market · smaller metro · 104 cost index · ~8% higher than Provo
Billings chimney sweep estimates
West market · smaller metro · 92 cost index · ~4% lower than Provo
How much chimney sweep costs in Temecula
West market · smaller metro · 102 cost index · ~6% higher than Provo
Chimney Sweep prices around Surprise
West market · smaller metro · 96 cost index · similar local pricing
Escondido, CA chimney sweep budget
West market · smaller metro · 103 cost index · ~7% higher than Provo
Local chimney sweep estimate for Pomona
West market · smaller metro · 96 cost index · similar local pricing
Chimney Sweep near Bellevue
West market · smaller metro · 114 cost index · ~18% higher than Provo
Average Cost in Provo, UT
For a typical chimney sweep scenario in Provo, UT, this calculator currently models a total around $501, or about $25 per linear foot.
When budgeting Chimney Sweep in Provo, local quotes usually reflect conditions across Utah. Water-conservation landscaping rules and alkaline soils in Utah affect outdoor project planning differently than wetter states.
In Provo, homeowners may see fewer bids, but local crews often know regional codes and typical homes in the area.
In Provo, West labor conditions set the baseline, but project totals still move most when scope changes during demolition.
Annual weather in Provo (12" of rainfall, ~4 freezing months) typically influences both crew scheduling and exterior product specs.
Utah's housing stock skews to newer suburban single-family with cold-climate envelopes, which gives Provo contractors a fairly consistent set of structural and finish patterns to bid against.
In Provo, modeled costs are currently about 4% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader west regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Provo.
Low / Mid / High Project Scenarios
Low Scenario
$236$20 per linear foot
Short single-flue open fireplace with a basic Level 1 sweep and light buildup, no camera.
Mid Scenario
$501$25 per linear foot
Typical 20 ft fireplace Level 1 sweep with moderate creosote and a video camera scan.
High Scenario
$2,580$64 per linear foot
Tall multi-flue wood-stove Level 2/3 scope with heavy creosote and camera report.
What Changes the Estimate Most in Provo?
- CSIA Level 1 vs Level 2 or Level 3 inspection scope creates the widest gap between a routine annual sweep and a deeper sale or hazard inspection.
- Wood-stove systems, extra flues, and heavy or glazed creosote are the main reasons cleaning time and labor exceed a simple open-fireplace visit.
- Chimney height plus optional camera scanning are the extras that most often expand a chimney-sweep estimate beyond the base service fee.
When This Calculator Is Less Accurate
This calculator is less accurate when the chimney needs animal removal, major liner replacement, masonry rebuild, inaccessible flues, or emergency post-fire remediation beyond a standard sweep and inspection visit.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Chimney Sweep Cost in Provo?
Chimney sweeps usually cost about $150-450 for a typical Level 1 cleaning, while Level 2 inspections often run higher when a home is sold, refinanced, or after a chimney event. Height, extra flues, heavy creosote, wood-stove systems, and camera scans are the main reasons quotes climb beyond a basic annual sweep.
Cost Factors:
- CSIA inspection level is the biggest driver because a routine Level 1 sweep is much cheaper than a Level 2 sale inspection or invasive Level 3 work
- Appliance type matters because wood stoves and inserts often leave denser deposits and take longer to clean than an open fireplace
- Chimney height and flue count raise labor when the tech needs more setup time, roof access, and separate flue cleaning
- Creosote severity can turn a quick maintenance visit into a longer scraping or glazed-creosote removal job
- Camera inspection adds cost but is useful when looking for cracks, offsets, animal nests, or damage that a visual sweep alone can miss
In Provo, home improvement costs are 4% below the national average. This reflects local labor rates, material availability, and cost of living in the Provo metro area.
Frequently Asked Questions (6)
How localized is the Chimney Sweep estimate for Provo, UT?
This page applies a West regional cost model plus local signals for Provo, UT, so totals are modeled around 4% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Provo?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Utah codes and local inspection steps can change both price and schedule compared with national averages.
How much does a chimney sweep cost?
A typical chimney sweep often costs about $150-450 for Level 1 cleaning and a basic visual check. Level 2 inspections, multiple flues, heavy creosote, taller chimneys, and camera scans commonly push totals higher.
What is the difference between CSIA Level 1, 2, and 3?
Level 1 is the routine annual sweep and basic visual check for a regularly used system with no known changes. Level 2 is a more thorough inspection often used for real-estate transactions or after changes to the system. Level 3 is invasive and used when serious hazards are suspected and hidden areas must be opened for evaluation.
Do I need a camera inspection with a chimney sweep?
Not always. Many annual Level 1 sweeps do not include a camera. A video scan is more useful when buying or selling a home, after a chimney fire or weather event, or when the technician suspects liner damage, blockage, or structural issues that cannot be confirmed from accessible openings alone.
Why do wood stoves cost more to sweep than fireplaces?
Wood stoves and inserts often create heavier creosote in a tighter flue path, so cleaning takes more time and may need more specialized tools. Shared or multi-appliance systems can add extra flues or connectors that expand the visit.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed August 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching chimney sweep in Provo.
Repair masonry after inspection
Chimney Repair Cost Calculator
Useful when a sweep or Level 2/3 inspection finds crown, flashing, or brick damage that needs masonry repair.
Plan a fireplace insert
Fireplace Insert Installation Cost Calculator
Helpful when comparing sweep and liner readiness costs before installing a wood or gas fireplace insert.
Inspect the roof around the chimney
Roof Inspection Cost Calculator
Useful when chimney leaks, flashing issues, or storm damage also require a broader roof inspection.
Related Calculators
Chimney Repair Cost Calculator
Estimate chimney repair costs by height, repair scope, access, and flashing.
Fireplace Insert Installation Cost Calculator
Estimate fireplace insert costs by fuel type, venting, hookup, surround, and labor.
Roof Inspection Cost Calculator
Estimate roof inspection costs by size, inspection type, complexity, and report scope.