Concrete Patio Cost in San Antonio, TX2026
Estimate concrete patio cost in San Antonio, TX with local labor and material pricing. Compare broom finish, stamped concrete, reinforcement, and demolition scope instantly.
Project Details
Total Estimated Cost
$4,570
Adjusted for local cost of living (-14%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (San Antonio, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Concrete Finish
Adjusted for San Antonio, TX (-14%)Same default project size (252 sq ft), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Basic Broom Finish | $7.96 | $3,817 | $15 |
| Standard Finished Patio | — | $4,570 | $18 |
| Colored / Exposed Aggregate | — | $5,573 | $22 |
| Stamped Decorative Concrete | — | $6,826 | $27 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting San Antonio
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near San Antonio, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| RoofersMost relevant | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Electricians | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in San Antonio, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Long, hot summers and short, mild winters with strong storm exposure narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Concrete Patio Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for San Antonio, TX
This San Antonio page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
14% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 1.5M city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Concrete Patio cost in Dallas
Texas market · major metro · 92 cost index · ~6% higher than San Antonio
Compare Concrete Patio pricing in Austin, TX
Texas market · mid-size metro · 97 cost index · ~11% higher than San Antonio
Fort Worth concrete patio estimates
Texas market · mid-size metro · 92 cost index · ~6% higher than San Antonio
How much concrete patio costs in Houston
Texas market · major metro · 84 cost index · ~2% lower than San Antonio
Concrete Patio prices around El Paso
Texas market · mid-size metro · 80 cost index · ~6% lower than San Antonio
Arlington, TX concrete patio budget
Texas market · mid-size metro · 91 cost index · ~5% higher than San Antonio
Local concrete patio estimate for Corpus Christi
Texas market · smaller metro · 80 cost index · ~6% lower than San Antonio
Concrete Patio near Plano
Texas market · smaller metro · 94 cost index · ~8% higher than San Antonio
Average Cost in San Antonio, TX
For a typical concrete patio scenario in San Antonio, TX, this calculator currently models a total around $4,570, or about $18 per square foot.
When budgeting Concrete Patio in San Antonio, local quotes usually reflect conditions across Texas. Expansive clay soils across much of Texas are a primary driver of foundation repair needs and can affect grading, drainage, and slab work.
In San Antonio, a deep subcontractor market usually supports competitive bidding, but peak-season backlogs can still tighten schedules.
Roofing and siding quotes around San Antonio, TX frequently change once crews inspect deck condition, flashing, and story height in the field.
Local building codes near San Antonio, TX reflect long, hot summers and short, mild winters with strong storm exposure, which is why exterior products often need higher wind, impact, or moisture ratings.
38% of Texas housing is post-2000, which usually means San Antonio exteriors are framed against newer codes, engineered trusses, and standardized roof pitches.
In San Antonio, modeled costs are currently about 14% below the national baseline. That usually reflects a mix of large-metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Concrete patio pricing in San Antonio usually depends on slab finish, reinforcement, base prep, and whether demolition or drainage work is required before the pour can happen.
Low / Mid / High Project Scenarios
Low Scenario
$1,638$14 per square foot
A small broom-finish slab with straightforward prep and no demolition.
Mid Scenario
$4,586$18 per square foot
A common backyard patio with standard finish and reinforced slab.
High Scenario
$17,952$36 per square foot
A larger decorative patio with thicker slab and demolition of the old surface.
What Changes the Estimate Most in San Antonio?
- Finish choice is the biggest driver, especially when moving from plain broom-finish slabs to stamped decorative concrete.
- Thickness, reinforcement, and base prep materially affect both price and long-term slab performance.
- Demolition and drainage prep are the main reasons patio projects jump above a simple square-foot baseline.
When This Calculator Is Less Accurate
This calculator is less accurate when the patio includes retaining walls, built-in seating, extensive drainage systems, outdoor kitchens, or unusually difficult site access for concrete placement.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Concrete Patio Cost in San Antonio?
Concrete patios usually cost about $12-28 per square foot installed depending on slab thickness, finish level, reinforcement, and site prep. Basic broom-finish patios sit near the low end, while decorative stamped concrete with demolition and thicker slabs costs more.
Cost Factors:
- Finish type is a major driver because stamped or decorative concrete costs much more than a simple broom-finish slab
- Thickness and reinforcement affect both material and labor, especially for heavier-use patios or poor soil conditions
- Base prep, grading, and forms often add more than homeowners expect before any concrete is poured
- Demolition can materially raise the total when an old patio, pavers, or damaged slab must be removed first
- Drainage, access, and site conditions often determine whether the job stays straightforward or not
In San Antonio, home improvement costs are 14% below the national average. This reflects local labor rates, material availability, and cost of living in the San Antonio metro area.
Frequently Asked Questions (5)
How localized is the Concrete Patio estimate for San Antonio, TX?
This page applies a South regional cost model plus local signals for San Antonio, TX, so totals are modeled around 14% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in San Antonio?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does a concrete patio cost?
Concrete patios often cost about $12-28 per square foot installed depending on finish type, slab thickness, reinforcement, and demolition needs. Basic gray concrete sits near the low end, while stamped decorative patios cost much more.
Is stamped concrete more expensive than plain concrete?
Yes. Stamped concrete usually costs materially more because it adds coloring, pattern work, timing-sensitive finishing, and more labor than a standard broom-finish slab.
How thick should a concrete patio be?
Many residential patios use a slab around 4 to 5 inches thick, but heavier loads, weaker soils, or local conditions may justify a thicker section and stronger reinforcement.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching concrete patio in San Antonio.
Concrete patio vs deck
Deck Building Cost Calculator
Useful when comparing two common backyard living-space upgrades before choosing a material path.
Patio and driveway hardscape planning
Driveway Installation Cost Calculator
Helpful when a broader concrete or paving budget covers more than one outdoor surface.
Repair vs replace an old patio
Concrete Repair Cost Calculator
Compare the cost of restoring a damaged slab with pouring a new concrete patio.
Related Calculators
Paver Patio Cost Calculator
Estimate paver patio costs by size, paver tier, pattern complexity, and prep.
Deck Building Cost Calculator
Estimate deck construction costs by size, material type, and added features.
Concrete Repair Cost Calculator
Estimate concrete repair costs by area, damage level, leveling, and finish blending.