Concrete Floor Polishing Cost in Hollywood, FL2026
Estimate concrete floor polishing cost in Hollywood, FL by grit level, densifier, stain, sealer, and crack repair with local labor pricing.
In Hollywood, FL, concrete floor polishing typically costs between $970 and $16,130 as of August 2026, or about $7 per square foot for a typical project, based on BLS labor data and producer price indexes adjusted for local metro pricing.
Pricing data updated · Sources: BLS OEWS, BLS PPI, FRED, U.S. Census
Project Details
Total Estimated Cost
$3,440
Adjusted for local cost of living (-6%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Hollywood, FL) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: August 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Grind & polish level
Adjusted for Hollywood, FL (-6%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Cream / light grind | $2 | $2,690 | $5 |
| Medium polish 400 grit | $3.5 | $3,440 | $7 |
| High polish 800 grit | $5 | $4,190 | $8 |
| Mirror polish 1500+ grit | $6.99 | $5,185 | $10 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Hollywood
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.9
+2.8% vs Jul 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Hollywood, FL
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (FL) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Construction LaborersMost relevant | 47-2061 | $18.24 | -20.0% | ~$44/hr |
| Electricians | 47-2111 | $26.19 | -18.7% | ~$63/hr |
| Plumbers & Pipefitters | 47-2152 | $25.51 | -22.3% | ~$61/hr |
| HVAC Mechanics | 49-9021 | $24.18 | -15.6% | ~$58/hr |
| Carpenters | 47-2031 | $22.94 | -20.8% | ~$55/hr |
| Painters | 47-2141 | $20.52 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $21.33 | -17.6% | ~$51/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Hollywood, FL
Derived from NOAA climate normals for FL: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Concrete Floor Polishing Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Hollywood, FL
This Hollywood page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
6% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 154K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Concrete Floor Polishing cost in Gainesville
Florida market · smaller metro · 86 cost index · ~8% lower than Hollywood
Compare Concrete Floor Polishing pricing in Pembroke Pines, FL
Florida market · smaller metro · 93 cost index · ~1% lower than Hollywood
Fort Lauderdale concrete floor polishing estimates
Florida market · smaller metro · 97 cost index · ~3% higher than Hollywood
How much concrete floor polishing costs in Cape Coral
Florida market · smaller metro · 90 cost index · ~4% lower than Hollywood
Concrete Floor Polishing prices around Lakeland
Florida market · smaller metro · 85 cost index · ~9% lower than Hollywood
Tallahassee, FL concrete floor polishing budget
Florida market · smaller metro · 85 cost index · ~9% lower than Hollywood
Local concrete floor polishing estimate for Port St. Lucie
Florida market · smaller metro · 88 cost index · ~6% lower than Hollywood
Concrete Floor Polishing near Hialeah
Florida market · smaller metro · 91 cost index · ~3% lower than Hollywood
Average Cost in Hollywood, FL
For a typical concrete floor polishing scenario in Hollywood, FL, this calculator currently models a total around $3,440, or about $7 per square foot.
When budgeting Concrete Floor Polishing in Hollywood, local quotes usually reflect conditions across Florida. Florida's humidity, salt air, and wind-driven rain often steer material choices and moisture detailing.
In Hollywood, homeowners may see fewer bids, but local crews often know regional codes and typical homes in the area.
In Hollywood, older homes can hide uneven substrates or lead-paint-era layers that add prep before new finishes go down.
Annual weather in Hollywood (54" of rainfall, ~0 freezing months) typically influences both crew scheduling and exterior product specs.
About 37% of homes in Florida were built after 2000, so Hollywood projects often work with newer hurricane-rated single-family construction and standardized rough-in details.
In Hollywood, modeled costs are currently about 6% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Hollywood.
Low / Mid / High Project Scenarios
Low Scenario
$970$4 per square foot
Small cream / light grind on a sound slab with no densifier, color, or crack repair.
Mid Scenario
$3,440$7 per square foot
Mid-size 400-grit polish with standard densifier and penetrating sealer on a clean slab.
High Scenario
$16,130$16 per square foot
Large mirror polish with premium densifier, acid stain, high-gloss guard, and extensive crack repair.
What Changes the Estimate Most in Hollywood?
- Grind and grit progression create the widest price gap — cream polish is far cheaper than an 800 or 1500+ grit mirror finish that needs many diamond passes.
- Densifier, decorative stain or dye, and topical guards stack material and labor on top of the base polish and routinely push jobs from mid-range into premium territory.
- Crack filling, joint repair, and profiling damaged concrete before polishing are the extras that most often expand a polished-concrete estimate.
When This Calculator Is Less Accurate
This calculator is less accurate when the slab needs vapor mitigation, structural concrete replacement, removal of thick failed coatings, multi-room color matching, or commercial chemical-resistant systems beyond standard residential polishing.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Concrete Floor Polishing Cost in Hollywood?
Polished concrete floors typically cost about $3–12 per square foot installed, depending on how many diamond-grind steps you run, whether you densify and color the slab, and how much crack or joint repair is needed first. A cream or light grind on sound concrete can land near the low end, while an 800–1500 grit mirror polish with densifier, acid stain, and a topical guard often reaches $8–15/sq ft. Labor and machine time for successive grit passes usually dominate the bid more than materials alone.
Cost Factors:
- Grind and grit level — cream polish is fastest; each step up to 400, 800, or 1500+ grit adds machine hours and diamond tooling cost
- Densifier — lithium or sodium silicate hardens the surface, improves shine retention, and is nearly standard on quality polish jobs
- Stain or dye — natural gray is cheapest; integral color, water-based dyes, and acid stains add material and application time
- Sealer or guard — penetrating sealers protect against stains; topical high-gloss guards add sheen and maintenance layers
- Crack and joint repair — filling, grinding, and re-profiling damaged concrete can add $0.75–2/sq ft before polishing starts
In Hollywood, home improvement costs are 6% below the national average. This reflects local labor rates, material availability, and cost of living in the Hollywood metro area.
Frequently Asked Questions (6)
How localized is the Concrete Floor Polishing estimate for Hollywood, FL?
This page applies a South regional cost model plus local signals for Hollywood, FL, so totals are modeled around 6% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Hollywood?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Florida codes and local inspection steps can change both price and schedule compared with national averages.
How much does concrete floor polishing cost?
Most residential and light-commercial polished concrete projects fall between $3 and $12 per square foot. A basic cream or medium 400-grit polish with densifier often lands around $5–8/sq ft, while decorative acid-stained or mirror-finish work with extensive repair commonly reaches $10–15/sq ft.
Is densifier required for polished concrete?
Densifier is strongly recommended for most polish jobs. It reacts with free lime in the concrete to harden and densify the surface, which improves gloss, reduces dusting, and helps the finish last longer under foot traffic.
How long does a polished concrete floor last?
A properly densified and sealed polished concrete floor can last 20+ years with routine cleaning. High-traffic commercial areas may need periodic re-honing or re-guarding every few years, but the slab itself does not need full replacement like coatings or carpet.
Can you polish concrete with cracks or old coatings?
Minor cracks and control joints are routinely filled before polishing. Failed paint, epoxy, or sealer must usually be removed first, and large structural cracks or heaved slabs may need concrete repair before a uniform polish is possible.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed August 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching concrete floor polishing in Hollywood.
Epoxy vs polished concrete
Epoxy Flooring Cost Calculator
Compare a resin coating system with a polished-and-densified slab when both are options for the same floor.
Garage floor coating alternatives
Garage Floor Coating Cost Calculator
Useful when deciding between polishing a garage slab and applying a flake or polyaspartic coating instead.
Repair concrete before polishing
Concrete Repair Cost Calculator
Helpful when cracks, spalls, or uneven slabs need repair before a uniform polish can be achieved.
Related Calculators
Epoxy Flooring Cost Calculator
Estimate epoxy floor cost by area, system type, surface prep, topcoat, and design.
Garage Floor Coating Cost Calculator
Estimate garage floor coating costs by area, coating type, and prep scope.
Concrete Patio Cost Calculator
Estimate concrete patio costs by size, finish, thickness, and site prep.