Fireplace Insert Installation Cost in Burlington, VT2026
Estimate fireplace insert installation cost in Burlington, VT by fuel type, venting, hookup, and surround work. Installed pricing often falls around $1,200–$8,000 depending on electric, gas, or wood/pellet inserts.
In Burlington, VT, fireplace insert installation typically costs between $1,386 and $13,492 as of July 2026, based on BLS labor data and producer price indexes adjusted for local metro pricing.
Pricing data updated · Sources: BLS OEWS, BLS PPI, FRED, U.S. Census
Project Details
Total Estimated Cost
$6,478
Adjusted for local cost of living (-1%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Burlington, VT) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: July 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Insert Type / Fuel
Adjusted for Burlington, VT (-1%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Electric — basic | $699 | $4,682 | $0 |
| Electric — premium | $1,497 | $5,480 | $0 |
| Gas — mid-range | $2,495 | $6,478 | $0 |
| Gas — premium | $4,192 | $8,175 | $0 |
| Wood / pellet — standard | $2,794 | $6,777 | $0 |
| Wood / pellet — premium | $3,992 | $7,975 | $0 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Burlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.9
+3.6% vs Jun 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Burlington, VT
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (VT) | vs national | Loaded billing rate |
|---|---|---|---|---|
| CarpentersMost relevant | 47-2031 | $25.85 | -10.7% | ~$62/hr |
| PaintersMost relevant | 47-2141 | $22.65 | -8.6% | ~$54/hr |
| Electricians | 47-2111 | $30.61 | -5.0% | ~$73/hr |
| Plumbers & Pipefitters | 47-2152 | $28.65 | -12.7% | ~$69/hr |
| HVAC Mechanics | 49-9021 | $27.18 | -5.2% | ~$65/hr |
| Roofers | 47-2181 | $23.30 | -10.0% | ~$56/hr |
| Construction Laborers | 47-2061 | $21.90 | -3.9% | ~$53/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Burlington, VT
Derived from NOAA climate normals for VT: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Fireplace Insert Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Burlington, VT
This Burlington page currently uses modeled local pricing based on northeast regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
1% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
Northeast · 45K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Fireplace Insert Installation cost in Portland
Northeast market · smaller metro · 100 cost index · ~1% higher than Burlington
Compare Fireplace Insert Installation pricing in Wilmington, DE
Northeast market · smaller metro · 97 cost index · ~2% lower than Burlington
Manchester fireplace insert installation estimates
Northeast market · smaller metro · 98 cost index · ~1% lower than Burlington
How much fireplace insert installation costs in Hartford
Northeast market · smaller metro · 96 cost index · ~3% lower than Burlington
Fireplace Insert Installation prices around New Haven
Northeast market · smaller metro · 100 cost index · ~1% higher than Burlington
Stamford, CT fireplace insert installation budget
Northeast market · smaller metro · 114 cost index · ~15% higher than Burlington
Local fireplace insert installation estimate for Syracuse
Northeast market · smaller metro · 94 cost index · ~5% lower than Burlington
Fireplace Insert Installation near Bridgeport
Northeast market · smaller metro · 99 cost index · similar local pricing
Average Cost in Burlington, VT
For a typical fireplace insert installation scenario in Burlington, VT, this calculator currently models a total around $6,478.
When budgeting Fireplace Insert Installation in Burlington, local quotes usually reflect conditions across Vermont. Small population and limited contractor pools in Vermont can extend lead times, especially for specialty trades outside Burlington.
Smaller markets like Burlington can see fewer specialty crews on short notice, so scheduling and travel minimums sometimes matter more than in major cities.
Finish schedules around Burlington, VT can shift with material lead times and how many rooms are tied into the same renovation phase.
Annual weather in Burlington (43" of rainfall, ~5 freezing months) typically influences both crew scheduling and exterior product specs.
Older stock dominates Burlington: think older New England farmhouse and snow-load housing where finish-layer demolition can uncover lead paint, asbestos, or out-of-spec plumbing.
In Burlington, modeled costs are currently about 1% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader northeast regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Burlington.
Low / Mid / High Project Scenarios
Low Scenario
$1,386Basic electric insert with a dedicated circuit, existing surround, and a short install day.
Mid Scenario
$6,489Mid-range gas insert with a standard liner kit, short gas run, basic trim, and a full install day.
High Scenario
$13,492Premium gas insert with full chimney liner, long gas run, custom mantel surround, and old-unit removal.
What Changes the Estimate Most in Burlington?
- Insert fuel type and quality create the widest price gap between a basic electric unit and a premium gas or wood/pellet insert.
- Venting and chimney liner scope is the main reason gas and wood installs exceed a simple electric plug-in or hardwired job.
- Gas or electrical hookups, surround and mantel finishing, and old-unit removal are the extras that most often expand a fireplace-insert estimate.
When This Calculator Is Less Accurate
This calculator is less accurate when the opening needs masonry rebuild, structural hearth repair, custom fabricated surrounds, or extensive chimney rebuild beyond a standard insert, liner, and hookup installation.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Fireplace Insert Installation Cost in Burlington?
Installed fireplace inserts typically run about $1,200–$2,500 for electric units, $3,000–$8,000 for gas with venting, and $3,500–$7,500 for wood or pellet inserts once labor and hookups are included. This calculator breaks out the insert, venting or liner, gas or electrical hookup, surround finishing, tear-out, and labor so you can match the estimate to your fireplace opening.
Cost Factors:
- Insert fuel type — electric units are the cheapest to buy and install; gas and wood/pellet inserts cost more and usually need venting
- Venting and liner work — a short direct-vent kit is far less than a full stainless chimney liner and new termination
- Gas line or electrical hookup — a nearby shutoff or dedicated circuit keeps costs low; long gas runs and pressure testing add hundreds
- Surround and mantel finishing — basic trim kits stay modest; tile, stone, or a custom mantel can rival the insert price
- Old unit removal — pulling an existing insert or debris disposal adds haul-away time before the new unit can go in
In Burlington, home improvement costs are 1% below the national average. This reflects local labor rates, material availability, and cost of living in the Burlington metro area.
Frequently Asked Questions (6)
How localized is the Fireplace Insert Installation estimate for Burlington, VT?
This page applies a Northeast regional cost model plus local signals for Burlington, VT, so totals are modeled close to a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Burlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Vermont codes and local inspection steps can change both price and schedule compared with national averages.
How much does a fireplace insert cost installed?
Many electric inserts land around $1,200–$2,500 installed. Gas inserts with venting commonly run $3,000–$8,000, while wood and pellet inserts often fall near $3,500–$7,500 depending on liner work, hookups, and surround finishing.
Do I need a chimney liner for a gas fireplace insert?
Most gas inserts that use an existing masonry chimney need a properly sized liner and termination for code and draft. Direct-vent gas inserts that exit through an exterior wall may use a manufacturer kit instead of a full chimney liner. Electric inserts typically need no venting at all.
Is an electric fireplace insert cheaper than gas?
Yes in most homes. Electric inserts avoid gas lines, chimneys, and combustion clearances, so install time and extras stay lower. Gas inserts usually cost more upfront but deliver stronger heat output and a more traditional flame look when venting and fuel are available.
Can I install a fireplace insert myself?
Electric plug-in or hardwired units are the most DIY-friendly if you are comfortable with electrical work and clearances. Gas and wood/pellet inserts typically need licensed gas, venting, and sometimes masonry work for safety and code compliance. This calculator assumes professional labor for the labor line item.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed July 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching fireplace insert installation in Burlington.
Repair chimney before insert
Chimney Repair Cost Calculator
Chimney masonry, flashing, or crown issues are often fixed before a new insert and liner can be installed safely.
Run gas for a gas insert
Gas Line Installation Cost Calculator
Gas fireplace inserts frequently need a new or extended gas line with shutoff and pressure testing.
Compare outdoor fireplace cost
Outdoor Fireplace Cost Calculator
Useful when weighing an indoor insert against building or upgrading an outdoor fireplace instead.
Related Calculators
Chimney Repair Cost Calculator
Estimate chimney repair costs by height, repair scope, access, and flashing.
Gas Line Installation Cost Calculator
Estimate gas line cost by appliance, run length, material, access, shutoff, testing, and permit.
Outdoor Fireplace Cost Calculator
Estimate outdoor fireplace cost by type, materials, height, and gas line.