Gravel Delivery Cost in Arlington, TX2026
Estimate gravel delivery and spread cost in Arlington, TX by area, stone type, depth, prep, fabric, delivery, and labor.
Project Details
Total estimated cost
$613
Adjusted for local cost of living (-7%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Arlington, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Gravel type
Adjusted for Arlington, TX (-7%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Crushed limestone | $44.87 | $613 | $1 |
| Pea gravel | $49.85 | $644 | $1 |
| River rock | $64.81 | $737 | $1 |
| Decomposed granite | $54.84 | $675 | $1 |
| Crushed concrete | $34.9 | $550 | $1 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Arlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.6
+4.0% vs May 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Arlington, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Construction LaborersMost relevant | 47-2061 | $18.95 | -16.8% | ~$45/hr |
| Electricians | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Painters | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $20.52 | -20.7% | ~$49/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Landscaping & sod / planting in Arlington, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Plant establishment needs mild soil temperatures. The state's long, hot summers and short, mild winters with strong storm exposure pushes ideal install months into the windows above.
Booking tip
Pair planting with the local nursery's drought-resistant catalog to avoid paying twice if a heat wave kills new sod.
Gravel Delivery Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Arlington, TX
This Arlington page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
7% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 394K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Gravel Delivery cost in Corpus Christi
Texas market · smaller metro · 81 cost index · ~12% lower than Arlington
Compare Gravel Delivery pricing in Plano, TX
Texas market · smaller metro · 96 cost index · ~3% higher than Arlington
Lubbock gravel delivery estimates
Texas market · smaller metro · 79 cost index · ~14% lower than Arlington
How much gravel delivery costs in Irving
Texas market · smaller metro · 92 cost index · ~1% lower than Arlington
Gravel Delivery prices around Laredo
Texas market · smaller metro · 81 cost index · ~12% lower than Arlington
Garland, TX gravel delivery budget
Texas market · smaller metro · 91 cost index · ~2% lower than Arlington
Local gravel delivery estimate for Frisco
Texas market · smaller metro · 95 cost index · ~2% higher than Arlington
Gravel Delivery near Amarillo
Texas market · smaller metro · 80 cost index · ~13% lower than Arlington
Average Cost in Arlington, TX
For a typical gravel delivery scenario in Arlington, TX, this calculator currently models a total around $613, or about $1 per square foot.
When budgeting Gravel Delivery in Arlington, local quotes usually reflect conditions across Texas. Texas markets often see hail, heat, and wide seasonal demand swings that can tighten exterior crew schedules.
Arlington behaves like a mid-size market: crews may travel from nearby metros, so travel time and local demand windows can swing quotes.
Outdoor projects near Arlington, TX often depend on soil, drainage, and access for equipment—especially on sloped lots.
Annual weather in Arlington (28" of rainfall, ~1 freezing months) typically influences both crew scheduling and exterior product specs.
Local building patterns in Arlington mostly come from newer single-family with slab foundations and storm-rated roofing, which influences how crews price prep, demolition, and finish coordination.
In Arlington, modeled costs are currently about 7% below the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Arlington.
Low / Mid / High Project Scenarios
Low Scenario
$103$1 per square foot
Small area with crushed concrete at 2 inches, no prep or fabric, pickup.
Mid Scenario
$917$2 per square foot
Walkway with pea gravel at 3 inches, light grading, fabric, and standard delivery.
High Scenario
$7,018$4 per square foot
Large driveway with river rock at 6 inches, full excavation, fabric, and large delivery.
What Changes the Estimate Most in Arlington?
- Gravel type and total tonnage create the widest price spread between a small pathway top-up and a large driveway base.
- Delivery distance, site-access constraints, and spreading labor are the main reasons gravel costs rise above a simple dump-and-go drop.
- Geotextile fabric, compaction passes, and edging installation are the extras that most often push a gravel-delivery bid higher.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes extensive grading, geotextile fabric underlayment, steep or confined site access, or large commercial tonnage beyond a standard residential gravel delivery.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Gravel Delivery Cost in Arlington?
All-in gravel projects often land around $1–5 per square foot depending on stone price per ton, how thick you need it, whether grading or fabric is required, and how far material must be trucked.
Cost Factors:
- Heavier decorative stone (river rock) costs more per ton than crushed base or recycled concrete
- Depth drives tonnage linearly—driveways and bases need more inches than light garden cover
- Poor drainage or soft subgrade can require excavation, compaction, or larger stone before the finish layer
- Delivery minimums and equipment surcharges apply when trucks cannot dump close to the work area
- Spreading and raking labor rises on slopes, tight gates, or when fabric and edging must be installed neatly
In Arlington, home improvement costs are 7% below the national average. This reflects local labor rates, material availability, and cost of living in the Arlington metro area.
Frequently Asked Questions (5)
How localized is the Gravel Delivery estimate for Arlington, TX?
This page applies a South regional cost model plus local signals for Arlington, TX, so totals are modeled around 7% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Arlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How many tons of gravel do I need?
A common rule of thumb is about one ton per 80 square feet at 4 inches deep; thinner layers use proportionally less. This calculator scales tonnage by your selected depth.
Do I need landscape fabric under gravel?
Fabric helps block weeds and keeps finer gravel from sinking into soil, but it is not always necessary for deep base layers. Your installer can advise based on soil and use.
Is pickup cheaper than delivery?
Yes if you have a suitable vehicle and can load safely, but weight limits and time on site often make delivered bulk more practical for larger areas.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching gravel delivery in Arlington.
Gravel vs paved driveway
Driveway Installation Cost Calculator
Compare gravel costs with a paved driveway to choose the best surface option.
Gravel vs mulch for beds
Mulch Installation Cost Calculator
Useful when deciding between decorative gravel and organic mulch for landscape beds.
Gravel path vs paved walkway
Walkway Installation Cost Calculator
Helpful when comparing a gravel pathway with a paved walkway for cost and aesthetics.
Related Calculators
Driveway Installation Cost Calculator
Estimate driveway installation costs by size, material, excavation, and tear-out.
Concrete Patio Cost Calculator
Estimate concrete patio costs by size, finish, thickness, and site prep.
French Drain Installation Cost Calculator
Estimate French drain cost by linear feet, drain type, depth, sump pump, landscape repair, and labor.