House Leveling Cost Calculator2026
Calculate house leveling costs by leveling length, pier count, settlement severity, foundation type, mudjacking versus piering method, and plumbing disconnect allowance. Compare light slabjacking with full pier-and-beam re-level scopes.
In the U.S., house leveling typically costs between $2,352 and $30,628 as of August 2026, or about $287 per linear foot for a typical project, based on BLS labor data and producer price indexes.
Pricing data updated · Sources: BLS OEWS, BLS PPI, FRED, U.S. Census
Project Details
Total Estimated Cost
$8,601
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Latest index refresh: August 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Leveling Method
National average pricingSame default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per lf |
|---|---|---|---|
| Mudjacking / Slabjacking | $27.97 | $7,792 | $260 |
| Standard Piering & Re-level | $54.95 | $8,601 | $287 |
| Structural Piering + Beam Work | $120 | $10,552 | $352 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.9
+2.8% vs Jul 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
House Leveling Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Typical Cost Snapshot
For a typical house leveling scenario in the national baseline, this calculator currently models a total around $8,601, or about $287 per linear foot.
This market is currently modeled close to the national baseline, so project swings are more likely to come from scope and finish choices than from regional pricing alone.
Local labor conditions, permit timing, and finish selection all influence how this project prices in your market.
Low / Mid / High Project Scenarios
Low Scenario
$2,352$157 per linear foot
Light mudjacking on a short pier-and-beam section with few piers and no plumbing work.
Mid Scenario
$8,603$287 per linear foot
Typical pier-and-beam re-level with moderate settlement, several piers, and basic plumbing protection.
High Scenario
$30,628$510 per linear foot
Severe slab settlement with structural piering, many piers, and extensive plumbing protection.
What Changes the Estimate Most?
- Pier count usually creates the widest price gap because each added support point raises materials, excavation, and structural labor.
- Leveling method matters most when choosing lighter mudjacking versus full structural piering and beam adjustment.
- Settlement severity plus plumbing disconnect needs often expand the scope once the lift risks cracking rigid water or drain lines.
When This Calculator Is Less Accurate
This calculator is less accurate when the home needs engineering redesign, major framing or sill repair, expansive-soil remediation across the full footprint, or utility relocation beyond a standard residential leveling scope.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does House Leveling Cost?
House leveling usually costs about $3,000-15,000+ depending on settlement severity, pier count, foundation type, and whether the crew uses mudjacking or structural piering. Light slabjacking sits near the low end, while severe settlement with many piers, beam work, and plumbing protection can climb much higher.
Cost Factors:
- Pier count is often the biggest driver because each added support point raises materials, excavation, and structural labor
- Settlement severity matters since cosmetic out-of-level floors are far cheaper than major structural re-leveling
- Foundation type changes access and method — pier-and-beam crawl spaces and slab-on-grade homes need different approaches
- Mudjacking or slabjacking is usually cheaper than full steel or concrete piering with beam adjustment
- Plumbing disconnect and reconnect allowances add cost when cast-iron or rigid lines risk breaking during the lift
Frequently Asked Questions (4)
How much does house leveling cost?
Most residential house leveling projects cost about $3,000-15,000+, depending on how far the structure has settled, how many piers are required, foundation type, and method. Light mudjacking can land near the low end, while severe settlement with structural piering costs more.
Is mudjacking cheaper than piering?
Usually yes. Mudjacking or slabjacking is often used for lighter slab settlement and tends to cost less per linear foot than installing structural piers and adjusting beams. Heavy or recurring settlement often needs piering instead.
Do I need to disconnect plumbing before leveling?
Often yes on larger lifts. Rigid drain, water, or gas lines can crack when the house is raised, so contractors may budget a plumbing disconnect and reconnect allowance — especially on older pier-and-beam homes.
How many piers does a typical house leveling job need?
Many mid-size jobs use roughly 4-12 piers, but the count depends on settlement pattern, soil, and foundation layout. Localized dips may need only a few piers, while whole-house re-leveling can require many more.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed August 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching house leveling.
Broader foundation repair scope
Foundation Repair Cost Calculator
Useful when leveling is part of a larger structural repair that also includes cracks, beams, or drainage mitigation.
Waterproof after re-leveling
Foundation Waterproofing Cost Calculator
Helpful when moisture or soil movement contributed to settlement and exterior waterproofing is planned next.
Stabilize the crawl space
Crawl Space Encapsulation Cost Calculator
Compare leveling with crawl-space encapsulation when moisture control is needed after pier-and-beam work.
Related Calculators
Foundation Repair Cost Calculator
Estimate foundation repair costs by repair length, piers, crack severity, and drainage.
Foundation Waterproofing Cost Calculator
Estimate foundation waterproofing costs by length, method, drainage, and excavation.
Crawl Space Encapsulation Cost Calculator
Estimate crawl space encapsulation costs by area, liner system, drainage, and dehumidification.