House Rewiring Cost in Dallas, TX2026
Estimate whole-house rewiring cost in Dallas, TX by square footage, partial vs full scope, wall access, stories, optional 200A panel, and permits.
Project Details
Total estimated cost
$16,063
Adjusted for local cost of living (-7%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Dallas, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: May 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Rewire Scope
Adjusted for Dallas, TX (-7%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Partial rewire — key circuits | $3.49 | $10,699 | $6 |
| Full rewire | $6.47 | $16,063 | $9 |
| Full rewire + smart / low-voltage pre-wire | $8.96 | $20,545 | $11 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Dallas
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.4
+4.2% vs Apr 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Dallas, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Painters | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Dallas, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
House Rewiring Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Dallas, TX
This Dallas page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
7% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
South · 1.3M city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
House Rewiring cost in San Antonio
Texas market · major metro · 86 cost index · ~7% lower than Dallas
Compare House Rewiring pricing in Austin, TX
Texas market · mid-size metro · 97 cost index · ~4% higher than Dallas
Fort Worth house rewiring estimates
Texas market · mid-size metro · 93 cost index · similar local pricing
How much house rewiring costs in El Paso
Texas market · mid-size metro · 80 cost index · ~13% lower than Dallas
House Rewiring prices around Arlington
Texas market · mid-size metro · 92 cost index · ~1% lower than Dallas
Corpus Christi, TX house rewiring budget
Texas market · smaller metro · 80 cost index · ~13% lower than Dallas
Local house rewiring estimate for Houston
Texas market · major metro · 83 cost index · ~10% lower than Dallas
House Rewiring near Plano
Texas market · smaller metro · 94 cost index · ~1% higher than Dallas
Average Cost in Dallas, TX
For a typical house rewiring scenario in Dallas, TX, this calculator currently models a total around $16,063, or about $9 per square foot.
When budgeting House Rewiring in Dallas, local quotes usually reflect conditions across Texas. Expansive clay soils across much of Texas are a primary driver of foundation repair needs and can affect grading, drainage, and slab work.
Dallas's size often means more specialty trades to choose from, though coordination across inspections and HOA rules can add time.
In Dallas, HVAC and electrical pricing can shift quickly once duct paths, venting, or service upgrades become part of the same job.
Dallas's climate (long, hot summers and short, mild winters with strong storm exposure) sets the seasonal backdrop for most home-improvement scopes around Dallas, TX.
Dallas's newer housing profile (newer single-family with slab foundations and storm-rated roofing) usually means fewer surprises behind the walls than in older Northeast and Midwest stock.
In Dallas, modeled costs are currently about 7% below the national baseline. That usually reflects a mix of large-metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Dallas.
Low / Mid / High Project Scenarios
Low Scenario
$5,193$5 per square foot
Partial rewire of a small single-story home with open walls, no panel.
Mid Scenario
$21,792$12 per square foot
Full rewire of a standard two-story home through finished walls with panel.
High Scenario
$72,309$21 per square foot
Full rewire with smart pre-wire in a large plaster home, panel included, higher-fee permits.
What Changes the Estimate Most in Dallas?
- Home size and the number of circuits drive the material and labor cost more than any other factor in a rewiring project.
- Wall-access method, attic-versus-crawl routing, and panel relocation are the main reasons rewiring labor varies widely between homes.
- Smart-home pre-wire, dedicated appliance circuits, and aluminum-to-copper transitions are the extras that most often push a rewiring bid higher.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes plaster-wall fishing, knob-and-tube abatement, major panel relocation, or smart-home pre-wiring beyond a standard whole-house rewiring scope.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does House Rewiring Cost in Dallas?
Rewiring an older home often runs about $5,000–25,000 depending on finished square footage, whether walls are open, how many stories must be fished, and whether you include a new panel and smart pre-wiring. This model treats material bundles as a per-square-foot rate scaled by access and adds labor per square foot with story and regional multipliers.
Cost Factors:
- Scope — replacing only overloaded or unsafe circuits costs far less than a full home run of new Romex and devices
- Wall finish — open studs during a remodel cut labor; fishing through insulated closed walls or plaster multiplies time on site
- Service equipment — a new 200A panel is often bundled with major rewires but can be quoted separately
- Code compliance — AFCI/GFCI requirements, smoke/CO interconnection, and grounding upgrades add devices and wire
- Home layout — multi-story homes need more vertical pulls, attic/crawl routing, and sometimes junction strategies
In Dallas, home improvement costs are 7% below the national average. This reflects local labor rates, material availability, and cost of living in the Dallas metro area.
Frequently Asked Questions (5)
How localized is the House Rewiring estimate for Dallas, TX?
This page applies a South regional cost model plus local signals for Dallas, TX, so totals are modeled around 7% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Dallas?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does it cost to rewire a house?
Many projects fall between $5,000 and $25,000. Smaller homes with open walls and partial scopes stay lower; large two-story homes with plaster walls, full rewires, and a new panel approach the top of the range.
Is a full rewire always necessary?
Not always. If the service is adequate and only certain branches are unsafe (knob-and-tube, damaged insulation), electricians may target those circuits. Full rewires are common when buying an ungrounded mid-century home or planning a major remodel.
Does drywall repair add to rewiring cost?
Yes. Fishing wires minimizes cuts, but some access holes or strip-outs are inevitable. Drywall and paint are usually a separate line item from the electrical bid—pair this estimate with a drywall repair allowance if walls are staying closed.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed May 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching house rewiring in Dallas.
Panel upgrade with rewiring
Electrical Panel Upgrade Cost Calculator
A full rewire almost always requires a panel upgrade to support new circuit loads.
Add recessed lights during rewire
Recessed Lighting Cost Calculator
Useful when open walls during a rewire make it cost-effective to add recessed lighting.
Fan wiring during a rewire
Ceiling Fan Installation Cost Calculator
Helpful when ceiling-fan circuits can be added efficiently while the walls are already open.
Related Calculators
Electrical Panel Upgrade Cost Calculator
Estimate panel upgrade cost by panel type, wiring scope, permits, meter base, and labor.
Ceiling Fan Installation Cost Calculator
Estimate ceiling fan install cost by fan count, quality, wiring, ceiling height, and mounting.
Drywall Repair Cost Calculator
Estimate drywall patch and wall repair costs by damage level and finish scope.