Ice Maker Installation Cost in Arlington, TX2026
Estimate ice maker installation cost in Arlington, TX by install type, water-line run length, filtration, drain, and electrical work.
Project Details
Total Estimated Cost
$521
Adjusted for local cost of living (-9%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Arlington, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Install type
Adjusted for Arlington, TX (-9%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Refrigerator water-line | — | $357 | $357 |
| Freestanding portable | — | $430 | $430 |
| Built-in undercounter | $299 | $521 | $521 |
| Commercial-grade modular | $547 | $746 | $746 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Arlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Arlington, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| HVAC MechanicsMost relevant | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Painters | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Arlington, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Ice Maker Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Arlington, TX
This Arlington page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
9% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 394K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Ice Maker Installation cost in Corpus Christi
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Compare Ice Maker Installation pricing in Plano, TX
Texas market · smaller metro · 94 cost index · ~3% higher than Arlington
Lubbock ice maker installation estimates
Texas market · smaller metro · 78 cost index · ~13% lower than Arlington
How much ice maker installation costs in Irving
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Ice Maker Installation prices around Laredo
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Garland, TX ice maker installation budget
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Local ice maker installation estimate for Frisco
Texas market · smaller metro · 93 cost index · ~2% higher than Arlington
Ice Maker Installation near Amarillo
Texas market · smaller metro · 79 cost index · ~12% lower than Arlington
Average Cost in Arlington, TX
For a typical ice maker installation scenario in Arlington, TX, this calculator currently models a total around $521, or about $521 per unit.
When budgeting Ice Maker Installation in Arlington, local quotes usually reflect conditions across Texas. Texas markets often see hail, heat, and wide seasonal demand swings that can tighten exterior crew schedules.
Arlington behaves like a mid-size market: crews may travel from nearby metros, so travel time and local demand windows can swing quotes.
In Arlington, South labor conditions set the baseline, but project totals still move most when scope changes during demolition.
Local conditions in Arlington, TX include long, hot summers and short, mild winters with strong storm exposure, which often shows up in material choices and scheduling.
Local building patterns in Arlington mostly come from newer single-family with slab foundations and storm-rated roofing, which influences how crews price prep, demolition, and finish coordination.
In Arlington, modeled costs are currently about 9% below the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Arlington.
Low / Mid / High Project Scenarios
Low Scenario
$184$184 per square foot
Refrigerator water-line hookup with short run and existing outlet.
Mid Scenario
$673$673 per square foot
Built-in undercounter ice maker with standard line, inline filter, drain to existing plumbing.
High Scenario
$1,901$1,901 per square foot
Commercial-grade modular ice maker with long line through ceiling, RO filtration, condensate pump, dedicated circuit.
What Changes the Estimate Most in Arlington?
- Water-line run length is the biggest variable: short under-sink runs are cheap, long runs through finished ceilings cost the most.
- Drain configuration (gravity vs pump) adds $150–300 when no existing drain is nearby.
- RO filtration is more expensive but produces clearer ice and significantly extends ice-maker life.
When This Calculator Is Less Accurate
This calculator is less accurate when the install includes commercial-grade modular ice production above 100 lb/day, multi-bin storage, or integration with bar/beverage station plumbing and drainage.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Ice Maker Installation Cost in Arlington?
Ice maker installation typically costs $150–500 for a refrigerator water-line or undercounter unit with existing plumbing, and $700–1,500+ for built-in or commercial-grade modular ice makers requiring new water lines, dedicated drains, and filtration. Long water-line runs through finished ceilings and reverse-osmosis filtration drive the upper end of costs.
Cost Factors:
- Install type — refrigerator water-line is cheapest; built-in undercounter and commercial modular cost more
- Water-line run — short runs under 10 ft are cheap; long runs through finished ceilings or basements cost most
- Filtration — inline carbon filters are inexpensive; RO systems improve ice clarity but add $200–300
- Drain configuration — gravity drains are cheapest; condensate pumps are needed where no drain exists
- Electrical — most ice makers run on a standard 15A outlet; commercial units may need dedicated circuits
In Arlington, home improvement costs are 9% below the national average. This reflects local labor rates, material availability, and cost of living in the Arlington metro area.
Frequently Asked Questions (5)
How localized is the Ice Maker Installation estimate for Arlington, TX?
This page applies a South regional cost model plus local signals for Arlington, TX, so totals are modeled around 9% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Arlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does it cost to install an ice maker?
Hooking up a refrigerator ice-maker water line typically costs $120–250. A built-in undercounter ice maker installed with new water and drain lines runs $400–900, and commercial-grade modular units with filtration and dedicated electrical can exceed $1,500.
Do I need filtration for my ice maker?
Filtration is strongly recommended. Hard-water deposits clog ice maker valves and produce cloudy ice. An inline carbon filter ($75–150) handles most municipal water; a small reverse-osmosis system ($250–400) produces crystal-clear ice and significantly extends ice-maker life.
Can I install a built-in ice maker without a drain line?
Most undercounter ice makers need a gravity drain. If your install location has no drain nearby, you'll need to either run a drain line to the kitchen sink ($150–300) or use a condensate pump ($200–400) that lifts wastewater to the nearest drain.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching ice maker installation in Arlington.
Ice maker with refrigerator install
Refrigerator Installation Cost Calculator
Useful when adding ice production alongside a primary fridge replacement.
Ice maker plus wine cooler
Wine Cooler Installation Cost Calculator
Helpful when building out a full bar or beverage station.
Ice-maker line plus sink plumbing
Kitchen Sink Installation Cost Calculator
Compare bundled small plumbing projects to share mobilization fees.
Related Calculators
Refrigerator Installation Cost Calculator
Estimate fridge install cost by type, delivery, water-line, and haul-away.
Wine Cooler Installation Cost Calculator
Estimate wine cooler install cost by cooler type, electrical, venting, and cabinetry.
Kitchen Sink Installation Cost Calculator
Estimate kitchen sink install cost by sink type, countertop modifications, plumbing scope, and labor.