Outdoor Faucet Installation Cost Calculator2026
Estimate outdoor faucet, hose bib, or frost-proof sillcock installation cost by faucet type, wall access, pipe run length, shutoff/backflow needs, wall material, and old faucet replacement.
Project Details
Total Estimated Cost
$663
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Latest index refresh: June 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Faucet Type
National average pricingSame default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Standard hose bib | $59.82 | $603 | $603 |
| Frost-proof sillcock | $120 | $663 | $663 |
| Anti-siphon frost-proof sillcock | $219 | $762 | $762 |
| Hot/cold outdoor faucet | $419 | $962 | $962 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.6
+4.0% vs May 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Outdoor Faucet Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Typical Cost Snapshot
For a typical outdoor faucet installation scenario in the national baseline, this calculator currently models a total around $663, or about $663 per unit.
This market is currently modeled close to the national baseline, so project swings are more likely to come from scope and finish choices than from regional pricing alone.
Local labor conditions, permit timing, and finish selection all influence how this project prices in your market.
Low / Mid / High Project Scenarios
Low Scenario
$409$409 per square foot
Replace one standard hose bib at an existing location with no new pipe run.
Mid Scenario
$754$754 per square foot
Add one frost-proof sillcock with 10 ft accessible pipe run, shutoff, vacuum breaker, and vinyl siding penetration.
High Scenario
$4,008$2,004 per square foot
Install two hot/cold outdoor faucets through masonry with 40 ft finished-wall routing and drain-down/backflow hardware.
What Changes the Estimate Most?
- New pipe-run length is the main driver when adding a hose bib to a side yard, garden, patio, or detached area.
- Frost-proof, anti-siphon, and hot/cold faucet choices add meaningful fixture cost compared with a basic hose bib.
- Wall material and code hardware — masonry drilling, shutoffs, vacuum breakers, and drain-down valves — explain most labor swings.
When This Calculator Is Less Accurate
This calculator is less accurate when the faucet ties into irrigation manifolds, includes yard hydrants far from the house, requires trenching below frost depth, or needs extensive stucco/brick restoration after wall penetration.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Outdoor Faucet Installation Cost?
Outdoor faucet installation usually costs $250-900 for a replacement hose bib or frost-proof sillcock and $700-1,800+ for a new location with pipe runs through finished walls or masonry. Frost-proof fixtures, shutoff/backflow requirements, wall material, and distance from an existing cold-water line drive the estimate.
Cost Factors:
- Frost-proof sillcocks cost more than basic hose bibs but reduce freeze-burst risk in cold climates
- New pipe length matters most when adding a faucet to a side yard, patio, garden, or detached area
- Brick, stucco, and masonry drilling add time compared with vinyl or wood siding
- Interior shutoffs, drain-down valves, and vacuum breakers are often required by local plumbing code
- Replacing a seized or leaking old faucet can take longer than installing into a clean new branch
Frequently Asked Questions (3)
How much does it cost to install an outdoor faucet?
Replacing an existing hose bib often costs $250-600. Adding a new frost-proof faucet in a new location usually costs $700-1,800 depending on pipe length, wall access, shutoff valves, and masonry drilling.
Is a frost-proof faucet worth it?
In freezing climates, yes. A frost-proof sillcock keeps the shutoff point inside the conditioned wall or basement, reducing the chance that water trapped near the exterior wall freezes and bursts the pipe.
Do outdoor faucets need backflow protection?
Many areas require a vacuum breaker or anti-siphon faucet so hose water cannot be pulled back into the drinking-water system. Irrigation and fertilizer attachments make backflow protection especially important.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching outdoor faucet installation.
Outdoor faucet vs irrigation system
Irrigation System Cost Calculator
Compare a simple hose bib against a full sprinkler or drip irrigation setup.
Outdoor water with backflow protection
Backflow Preventer Cost Calculator
Helpful when local code requires vacuum breakers or dedicated backflow devices.
Repair leaking outdoor faucet piping
Pipe Repair Cost Calculator
Useful when a frozen hose bib has damaged the interior supply pipe.
Related Calculators
Irrigation System Cost Calculator
Estimate sprinkler cost by yard size, system type, zones, controller, backflow, trenching, and labor.
Backflow Preventer Cost Calculator
Estimate backflow preventer cost by device type, pipe size, access, freeze protection, and testing.
Pipe Repair Cost Calculator
Estimate pipe repair or repipe cost by repair type, access difficulty, fixtures, and permits.