Outlet Installation Cost in Denver, CO2026
Estimate outlet installation cost in Denver, CO with local labor and material pricing. Compare outlet count, GFCI or weatherproof devices, wiring complexity, access, and finish work instantly.
Project Details
Total Estimated Cost
$512
Adjusted for local cost of living (+1%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Denver, CO) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Outlet Type (each)
Adjusted for Denver, CO (+1%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per outlet |
|---|---|---|---|
| Standard 120V Receptacle | $7.98 | $472 | $118 |
| Decorator / Tamper-Resistant Outlet | $17.95 | $512 | $128 |
| GFCI Outlet | $34.9 | $580 | $145 |
| Weather-Resistant Exterior Outlet | $54.84 | $659 | $165 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Denver
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.6
+4.0% vs May 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Denver, CO
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (CO) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $32.78 | +1.8% | ~$79/hr |
| Plumbers & Pipefitters | 47-2152 | $32.04 | -2.4% | ~$77/hr |
| HVAC Mechanics | 49-9021 | $28.93 | +0.9% | ~$69/hr |
| Carpenters | 47-2031 | $27.44 | -5.2% | ~$66/hr |
| Painters | 47-2141 | $22.60 | -8.8% | ~$54/hr |
| Roofers | 47-2181 | $24.80 | -4.2% | ~$60/hr |
| Construction Laborers | 47-2061 | $23.61 | +3.6% | ~$57/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Denver, CO
Derived from NOAA climate normals for CO: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Outlet Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Denver, CO
This Denver page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
1% above national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
West · 716K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Outlet Installation cost in Colorado Springs
Colorado market · mid-size metro · 98 cost index · ~3% lower than Denver
Compare Outlet Installation pricing in Aurora, CO
Colorado market · mid-size metro · 102 cost index · ~1% higher than Denver
Fort Collins outlet installation estimates
Colorado market · smaller metro · 100 cost index · ~1% lower than Denver
How much outlet installation costs in Seattle
West market · mid-size metro · 113 cost index · ~12% higher than Denver
Outlet Installation prices around Portland
West market · mid-size metro · 106 cost index · ~5% higher than Denver
Las Vegas, NV outlet installation budget
West market · mid-size metro · 98 cost index · ~3% lower than Denver
Local outlet installation estimate for Albuquerque
West market · mid-size metro · 92 cost index · ~9% lower than Denver
Outlet Installation near San Francisco
West market · mid-size metro · 111 cost index · ~10% higher than Denver
Average Cost in Denver, CO
For a typical outlet installation scenario in Denver, CO, this calculator currently models a total around $512, or about $128 per outlet.
When budgeting Outlet Installation in Denver, local quotes usually reflect conditions across Colorado. Rapid growth along Colorado's urban corridor has tightened contractor availability and pushed permit timelines for many trades.
Denver behaves like a mid-size market: crews may travel from nearby metros, so travel time and local demand windows can swing quotes.
Mechanical and electrical upgrades near Denver, CO often depend on panel capacity, older wiring, and whether the home needs brought up to current code.
Denver's climate (high-altitude winters, dry air, and frequent hailstorms) sets the seasonal backdrop for most home-improvement scopes around Denver, CO.
Project planning in Denver often has to read each home individually because the local stock blends newer suburban builds with hail-rated roofing with deeper mid-century pockets.
In Denver, modeled costs are currently about 1% above the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader west regional cost pressure.
Outlet installation in Denver often varies with whether the outlet is a simple replacement or a new location that needs added wiring, access work, and patching in finished walls.
Low / Mid / High Project Scenarios
Low Scenario
$268$89 per outlet
A simple swap of a few existing standard receptacles with no patch work.
Mid Scenario
$698$175 per outlet
Several new decorator or GFCI outlets added from nearby circuits in finished walls.
High Scenario
$2,826$353 per outlet
A larger exterior or dedicated-circuit outlet project with more difficult wall access.
What Changes the Estimate Most in Denver?
- Replacing outlets is much cheaper than adding new locations, because wiring and wall access often control the real labor.
- Device type matters most in kitchens, baths, and exterior areas where GFCI or weather-resistant protection is required.
- Patch work and difficult finished-wall access are the main reasons outlet quotes climb above a simple device-swap price.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes major rewiring, aluminum-wire remediation, panel capacity issues, or broad wall repair beyond a standard outlet installation.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Outlet Installation Cost in Denver?
Outlet installation often costs about $100-450 per outlet depending on whether you are replacing an existing receptacle or adding a new location, the device type, wall access, and how much patch work is required.
Cost Factors:
- Outlet type affects price because GFCI and weather-resistant receptacles cost more than standard interior outlets
- Adding a new outlet usually costs more than replacing an existing one because new cable must be routed and terminated
- Wall access matters a lot in finished spaces where fishing wire and patching surfaces take longer
- Exterior or dedicated-circuit outlets can add labor when the run is longer or weatherproof details are required
- Patch and finish work is often the hidden cost when new boxes or cable routes disturb drywall or finished surfaces
In Denver, home improvement costs are 1% above the national average. This reflects local labor rates, material availability, and cost of living in the Denver metro area.
Frequently Asked Questions (5)
How localized is the Outlet Installation estimate for Denver, CO?
This page applies a West regional cost model plus local signals for Denver, CO, so totals are modeled close to a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Denver?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Colorado codes and local inspection steps can change both price and schedule compared with national averages.
How much does outlet installation cost?
Outlet installation often lands around $100-450 per outlet depending on whether it is a simple replacement or a new outlet location. GFCI, exterior, and difficult wall-access work cost more than basic interior swaps.
Why does adding a new outlet cost more than replacing one?
A replacement mainly involves device swap labor, while a new outlet usually needs cable routing, a new box, circuit evaluation, and sometimes drywall patching. That extra wiring work is why the price rises quickly.
Do kitchen and bathroom outlets need GFCI protection?
In most cases, yes. Wet or damp locations usually require GFCI protection by code, and that requirement can affect both device cost and how the electrician wires the circuit.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching outlet installation in Denver.
Add outlets or rewire the room
House Rewiring Cost Calculator
Useful when a few new receptacles may not be enough and the broader circuit layout also needs updating.
Check panel capacity for new outlets
Electrical Panel Upgrade Cost Calculator
Helpful when added receptacles, GFCI protection, or dedicated circuits may require more panel capacity.
Indoor and outdoor electrical additions
Landscape Lighting Cost Calculator
Compare interior outlet work with outdoor electrical upgrades happening in the same project cycle.
Related Calculators
House Rewiring Cost Calculator
Estimate rewiring cost by home size, scope, access, stories, panel option, and permits.
Electrical Panel Upgrade Cost Calculator
Estimate panel upgrade cost by panel type, wiring scope, permits, meter base, and labor.
Smoke Detector Installation Cost Calculator
Estimate smoke detector cost by count, detector type, hardwired scope, interconnects, and labor.