Recessed Lighting Cost in Pembroke Pines, FL2026

Estimate recessed lighting installation cost in Pembroke Pines, FL by fixture count, LED trim tier, ceiling difficulty, dimmers, and height-adjusted labor.

Project Details

Number of lights

Fixture quality (per light)

Wiring situation

Dimmer switches (per room)

Number of dimmer locations

Ceiling height

Total estimated cost

$985

Adjusted for local cost of living (-8%)

Cost Breakdown

LED Fixtures$209

Dimmer Switches$119

Wiring & Installation Labor$657

Cost per Light$164

Cost Distribution

LED Fixtures (21%)

Dimmer Switches (12%)

Wiring & Installation Labor (67%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Pembroke Pines, FL) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Recessed Lighting Cost by City

National Average New York, NY Los Angeles, CA Chicago, IL Houston, TX Phoenix, AZ Philadelphia, PA San Antonio, TX San Diego, CA Dallas, TX San Jose, CA Austin, TX Jacksonville, FL Columbus, OH Charlotte, NC San Francisco, CA Indianapolis, IN Seattle, WA Denver, CO Washington, DC Nashville, TN Oklahoma City, OK Boston, MA El Paso, TX Detroit, MI Portland, OR Las Vegas, NV Memphis, TN Louisville, KY Baltimore, MD Milwaukee, WI Albuquerque, NM Tucson, AZ Fresno, CA Sacramento, CA Kansas City, MO Mesa, AZ Atlanta, GA Omaha, NE Long Beach, CA Raleigh, NC Virginia Beach, VA Miami, FL Oakland, CA Minneapolis, MN Tulsa, OK Bakersfield, CA Wichita, KS Arlington, TX Aurora, CO Tampa, FL Cleveland, OH Anaheim, CA Honolulu, HI Lexington, KY Stockton, CA Corpus Christi, TX Henderson, NV Riverside, CA Newark, NJ Saint Paul, MN Cincinnati, OH Irvine, CA Orlando, FL St. Louis, MO Pittsburgh, PA Greensboro, NC Lincoln, NE Jersey City, NJ Plano, TX Durham, NC Buffalo, NY Chandler, AZ Madison, WI Reno, NV Lubbock, TX Winston-Salem, NC Scottsdale, AZ Norfolk, VA Boise, ID Salt Lake City, UT New Orleans, LA Fort Worth, TX Toledo, OH St. Petersburg, FL Richmond, VA Spokane, WA Huntsville, AL Tacoma, WA Baton Rouge, LA Des Moines, IA Rochester, NY Worcester, MA Little Rock, AR Knoxville, TN Grand Rapids, MI Birmingham, AL Providence, RI Fort Lauderdale, FL Mobile, AL Charleston, SC Jackson, MS Colorado Springs, CO Anchorage, AK Gilbert, AZ Fort Wayne, IN North Las Vegas, NV Hialeah, FL Chesapeake, VA Glendale, AZ Garland, TX Irving, TX Laredo, TX Modesto, CA San Bernardino, CA Moreno Valley, CA Fontana, CA Port St. Lucie, FL Oxnard, CA Augusta, GA Amarillo, TX Montgomery, AL Frisco, TX Grand Prairie, TX McKinney, TX Overland Park, KS Peoria, AZ Vancouver, WA Shreveport, LA Brownsville, TX Newport News, VA Tempe, AZ Chattanooga, TN Cape Coral, FL Santa Rosa, CA Salem, OR Eugene, OR Ontario, CA Rancho Cucamonga, CA Sioux Falls, SD Springfield, MO Clarksville, TN Garden Grove, CA Oceanside, CA Bellevue, WA Macon, GA Surprise, AZ Murfreesboro, TN Killeen, TX Alexandria, VA Hayward, CA Pomona, CA Sunnyvale, CA Escondido, CA Fort Collins, CO Akron, OH Tallahassee, FL Naperville, IL Rockford, IL Bridgeport, CT Savannah, GA Syracuse, NY McAllen, TX Gainesville, FL Columbia, SC New Haven, CT Stamford, CT Midland, TX Hampton, VA Santa Clarita, CA Huntington Beach, CA Yonkers, NY Temecula, CA Pembroke Pines, FL Hollywood, FL Peoria, IL Lakeland, FL Hartford, CT Dayton, OH Cedar Rapids, IA Columbia, MO Fargo, ND Ann Arbor, MI Lansing, MI Provo, UT Manchester, NH Billings, MT Fayetteville, AR Green Bay, WI Ogden, UT Duluth, MN Lafayette, LA Flint, MI Missoula, MT Appleton, WI Rapid City, SD Wilmington, DE Portland, ME Greenville, SC Cheyenne, WY Sarasota, FL Charleston, WV Burlington, VT

Local Market Context for Pembroke Pines, FL

This Pembroke Pines page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

8% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

South · 171K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Compare Nearby Markets

Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.

Recessed Lighting in Fort Lauderdale, FL

South market · 97 cost index

Recessed Lighting in Hollywood, FL

South market · 93 cost index

Recessed Lighting in Cape Coral, FL

South market · 89 cost index

Recessed Lighting in Tallahassee, FL

South market · 85 cost index

Average Cost in Pembroke Pines, FL

For a typical recessed lighting scenario in Pembroke Pines, FL, this calculator currently models a total around $985.

When budgeting Recessed Lighting in Pembroke Pines, local quotes usually reflect conditions across Florida. Year-round construction activity in Florida keeps crews busy but also means scheduling competition across most trades.

Pembroke Pines pricing still tracks South labor signals, even when the local contractor pool is smaller.

Mechanical and electrical upgrades near Pembroke Pines, FL often depend on panel capacity, older wiring, and whether the home needs brought up to current code.

In Pembroke Pines, modeled costs are currently about 8% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader south regional cost pressure.

Local labor conditions, permit timing, and finish selection all influence how this project prices in Pembroke Pines.

Low / Mid / High Project Scenarios

What Changes the Estimate Most in Pembroke Pines?

When This Calculator Is Less Accurate

This calculator is less accurate when the project includes hidden structural work, specialty materials, or permit-driven scope changes.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Recessed Lighting Cost in Pembroke Pines?

Installed recessed cans often work out to about $100–350 per light nationally once you factor trim quality, how hard the ceiling is to fish, tall or vaulted heights, and dimming. This calculator multiplies per-light material by count, adds dimmer spend, and scales per-fixture labor with wiring and height factors.

Cost Factors:

Fixture tier — basic 4" kits cost less than IC-rated airtight housings or adjustable gimbals rated for insulation contact
Retrofit vs. open ceiling — cutting and patching finished drywall, or working from below finished spaces, adds labor versus open framing
Insulation and code — IC-rated assemblies and fire-rated assemblies add material cost where ceilings meet attic insulation
Dimming — smart switches and multi-location dimming cost more than a single standard dimmer per zone
Ceiling height — ladders, lifts, and longer cable drops increase labor on tall or vaulted rooms

In Pembroke Pines, home improvement costs are 8% below the national average. This reflects local labor rates, material availability, and cost of living in the Pembroke Pines metro area.

Frequently Asked Questions (5)

How localized is the Recessed Lighting estimate for Pembroke Pines, FL?

This page applies a South regional cost model plus local signals for Pembroke Pines, FL, so totals are modeled around 8% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Pembroke Pines?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Florida codes and local inspection steps can change both price and schedule compared with national averages.

LED vs. halogen recessed lights — what should I pick?

Most new installs use LED integrated or LED-ready cans for long life, low heat, and efficiency. Halogen is largely legacy; swapping to LED trims or full housings is common when updating older cans.

How far apart should recessed lights be spaced?

A common starting rule is spacing about half the ceiling height (e.g., 4–5 ft on an 8 ft ceiling) for even general lighting, then adjusted for beam angle, task areas, and furniture layout. Kitchens and offices often need tighter spacing over work surfaces.

Why does retrofit cost more than new construction?

With open ceilings, electricians cut holes and wire before drywall—fast access. Retrofits mean careful hole saws, fishing wires through top plates, minimal damage, texture touch-up, and sometimes working around blown-in insulation, which all add time versus new build.

Data Sources & Methodology

Base costs — national average rates from industry publications, contractor surveys, and home improvement platforms.
Regional adjustments — derived from BLS Consumer Price Index, including direct metro CPI coverage for major cities where available.
Housing and income signals — lightly refined using U.S. Census ACS state-level median income and home value data.
Inflation tracking — adjusted using Producer Price Index for Construction, with FRED as a fallback data source for compatible series.

Last updated: April 2026. Market indices can be refreshed monthly via BLS, with Census and FRED fallback inputs. Estimates are approximate and may vary ±15–30%.