Retaining Wall Cost in Clarksville, TN2026

Estimate retaining wall cost in Clarksville, TN with local labor and material pricing. Compare block walls, drainage packages, wall height, and excavation scope instantly.

Project Details

Wall Length(linear ft)

Average Wall Height

Wall Material

Drainage & Backfill Package

Excavation Complexity

Total Estimated Cost

$7,202

Adjusted for local cost of living (-19%)

Cost Breakdown

Wall Face Area120 sq ft

Wall Material$5,015

Drainage & Backfill$637

Excavation & Footing Prep$776

Geogrid / Reinforcement$0

Installation Labor$774

Cost per Linear Foot$180

Cost Distribution

Wall Material (70%)

Drainage & Backfill (9%)

Excavation & Footing Prep (11%)

Installation Labor (11%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Clarksville, TN) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Retaining Wall Cost by City

National Average New York, NY Los Angeles, CA Chicago, IL Houston, TX Phoenix, AZ Philadelphia, PA San Antonio, TX San Diego, CA Dallas, TX San Jose, CA Austin, TX Jacksonville, FL Columbus, OH Charlotte, NC San Francisco, CA Indianapolis, IN Seattle, WA Denver, CO Washington, DC Nashville, TN Oklahoma City, OK Boston, MA El Paso, TX Detroit, MI Portland, OR Las Vegas, NV Memphis, TN Louisville, KY Baltimore, MD Milwaukee, WI Albuquerque, NM Tucson, AZ Fresno, CA Sacramento, CA Kansas City, MO Mesa, AZ Atlanta, GA Omaha, NE Long Beach, CA Raleigh, NC Virginia Beach, VA Miami, FL Oakland, CA Minneapolis, MN Tulsa, OK Bakersfield, CA Wichita, KS Arlington, TX Aurora, CO Tampa, FL Cleveland, OH Anaheim, CA Honolulu, HI Lexington, KY Stockton, CA Corpus Christi, TX Henderson, NV Riverside, CA Newark, NJ Saint Paul, MN Cincinnati, OH Irvine, CA Orlando, FL St. Louis, MO Pittsburgh, PA Greensboro, NC Lincoln, NE Jersey City, NJ Plano, TX Durham, NC Buffalo, NY Chandler, AZ Madison, WI Reno, NV Lubbock, TX Winston-Salem, NC Scottsdale, AZ Norfolk, VA Boise, ID Salt Lake City, UT New Orleans, LA Fort Worth, TX Toledo, OH St. Petersburg, FL Richmond, VA Spokane, WA Huntsville, AL Tacoma, WA Baton Rouge, LA Des Moines, IA Rochester, NY Worcester, MA Little Rock, AR Knoxville, TN Grand Rapids, MI Birmingham, AL Providence, RI Fort Lauderdale, FL Mobile, AL Charleston, SC Jackson, MS Colorado Springs, CO Anchorage, AK Gilbert, AZ Fort Wayne, IN North Las Vegas, NV Hialeah, FL Chesapeake, VA Glendale, AZ Garland, TX Irving, TX Laredo, TX Modesto, CA San Bernardino, CA Moreno Valley, CA Fontana, CA Port St. Lucie, FL Oxnard, CA Augusta, GA Amarillo, TX Montgomery, AL Frisco, TX Grand Prairie, TX McKinney, TX Overland Park, KS Peoria, AZ Vancouver, WA Shreveport, LA Brownsville, TX Newport News, VA Tempe, AZ Chattanooga, TN Cape Coral, FL Santa Rosa, CA Salem, OR Eugene, OR Ontario, CA Rancho Cucamonga, CA Sioux Falls, SD Springfield, MO Clarksville, TN Garden Grove, CA Oceanside, CA Bellevue, WA Macon, GA Surprise, AZ Murfreesboro, TN Killeen, TX Alexandria, VA Hayward, CA Pomona, CA Sunnyvale, CA Escondido, CA Fort Collins, CO Akron, OH Tallahassee, FL Naperville, IL Rockford, IL Bridgeport, CT Savannah, GA Syracuse, NY McAllen, TX Gainesville, FL Columbia, SC New Haven, CT Stamford, CT Midland, TX Hampton, VA Santa Clarita, CA Huntington Beach, CA Yonkers, NY Temecula, CA Pembroke Pines, FL Hollywood, FL Peoria, IL Lakeland, FL Hartford, CT Dayton, OH Cedar Rapids, IA Columbia, MO Fargo, ND Ann Arbor, MI Lansing, MI Provo, UT Manchester, NH Billings, MT Fayetteville, AR Green Bay, WI Ogden, UT Duluth, MN Lafayette, LA Flint, MI Missoula, MT Appleton, WI Rapid City, SD Wilmington, DE Portland, ME Greenville, SC Cheyenne, WY Sarasota, FL Charleston, WV Burlington, VT

Local Market Context for Clarksville, TN

This Clarksville page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

19% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

South · 167K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Compare Nearby Markets

Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.

Retaining Wall in Murfreesboro, TN

South market · 86 cost index

Retaining Wall in Chattanooga, TN

South market · 83 cost index

Retaining Wall in Knoxville, TN

South market · 85 cost index

Retaining Wall in Memphis, TN

South market · 80 cost index

Average Cost in Clarksville, TN

For a typical retaining wall scenario in Clarksville, TN, this calculator currently models a total around $7,202, or about $180 per linear foot.

When budgeting Retaining Wall in Clarksville, local quotes usually reflect conditions across Tennessee. Nashville-area growth and Appalachian terrain in eastern Tennessee create very different labor markets and access conditions.

Smaller markets like Clarksville can see fewer specialty crews on short notice, so scheduling and travel minimums sometimes matter more than in major cities.

In South markets like Clarksville, exterior scopes often hinge on storm history, UV exposure, and how busy local crews are.

In Clarksville, modeled costs are currently about 19% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader south regional cost pressure.

Retaining wall pricing in Clarksville often varies with wall height, material system, drainage requirements, and how difficult excavation or reinforcement becomes on the site.

Low / Mid / High Project Scenarios

Low Scenario

$1,505

$75 per linear foot

A shorter low landscape wall with straightforward excavation and basic drainage.

Mid Scenario

$7,230

$181 per linear foot

A standard segmental block wall with normal drainage and excavation.

High Scenario

$52,149

$745 per linear foot

A taller engineered wall with stronger materials, drainage, and heavier excavation.

What Changes the Estimate Most in Clarksville?

Wall height is the biggest driver because material quantities, excavation, and reinforcement scale up quickly as the wall gets taller.
Drainage and backfill are critical price drivers because retaining walls fail early when water pressure is not managed correctly.
Engineering and access constraints often push taller retaining walls far above basic landscape-wall pricing.

When This Calculator Is Less Accurate

This calculator is less accurate when the wall requires formal engineering, difficult permitting, very poor soils, stepped geometry, or major slope stabilization beyond a standard retaining-wall scope.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Retaining Wall Cost in Clarksville?

Retaining walls usually cost about $60-180 per linear foot installed depending on wall height, material, drainage, and excavation complexity. Low timber walls stay near the bottom of the range, while taller engineered block walls with drainage and reinforcement cost much more.

Cost Factors:

Wall height is a major driver because taller walls need more material, more excavation, and often more engineering
Material choice changes the baseline quickly, especially when moving from timber to segmental block or engineered systems
Drainage is critical because retaining walls fail early when water pressure is not managed behind the wall
Excavation access, slope conditions, and soil handling materially affect installation cost
Reinforcement and engineering often become necessary once the wall moves beyond basic landscape height

In Clarksville, home improvement costs are 19% below the national average. This reflects local labor rates, material availability, and cost of living in the Clarksville metro area.

Frequently Asked Questions (5)

How localized is the Retaining Wall estimate for Clarksville, TN?

This page applies a South regional cost model plus local signals for Clarksville, TN, so totals are modeled around 19% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Clarksville?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Tennessee codes and local inspection steps can change both price and schedule compared with national averages.

How much does a retaining wall cost?

Retaining walls often cost about $60-180 per linear foot installed depending on height, material, drainage, and excavation conditions. Small landscape walls are much cheaper than taller engineered retaining walls.

Why is drainage such a big part of retaining wall cost?

Because drainage is what keeps water pressure from building up behind the wall. Drain tile, stone backfill, and fabric are often essential to long-term performance, not optional upgrades.

When does a retaining wall need engineering?

Requirements vary by location, but taller walls often need engineering, permits, and stronger reinforcement once they move beyond basic landscape height or support meaningful soil load.

Data Sources & Methodology

Base costs — national average rates from industry publications, contractor surveys, and home improvement platforms.
Regional adjustments — derived from BLS Consumer Price Index, including direct metro CPI coverage for major cities where available.
Housing and income signals — lightly refined using U.S. Census ACS state-level median income and home value data.
Inflation tracking — adjusted using Producer Price Index for Construction, with FRED as a fallback data source for compatible series.

Last updated: April 2026. Market indices can be refreshed monthly via BLS, with Census and FRED fallback inputs. Estimates are approximate and may vary ±15–30%.

Explore Related Project Costs

These are common next-step comparisons for people researching retaining wall in Clarksville.

Wall support vs foundation issues