Screen Enclosure Cost in Winston-Salem, NC2026
Estimate screen enclosure cost in Winston-Salem, NC by area, frame, mesh, roof style, height, doors, and permits. Many residential enclosures land around $1,500–$15,000.
Project Details
Total Estimated Cost
$5,822
Adjusted for local cost of living (-17%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Winston-Salem, NC) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: May 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Frame Type
Adjusted for Winston-Salem, NC (-17%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Aluminum standard | $5.98 | $4,928 | $16 |
| Aluminum heavy-duty | $8.96 | $5,822 | $19 |
| Vinyl-coated aluminum | $10.96 | $6,422 | $21 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Winston-Salem
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.4
+4.2% vs Apr 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Winston-Salem, NC
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (NC) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $19.41 | -21.7% | ~$47/hr |
| RoofersMost relevant | 47-2181 | $20.95 | -19.0% | ~$50/hr |
| Electricians | 47-2111 | $25.20 | -21.8% | ~$60/hr |
| Plumbers & Pipefitters | 47-2152 | $24.62 | -25.0% | ~$59/hr |
| HVAC Mechanics | 49-9021 | $23.46 | -18.1% | ~$56/hr |
| Carpenters | 47-2031 | $21.84 | -24.6% | ~$52/hr |
| Construction Laborers | 47-2061 | $18.45 | -19.0% | ~$44/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Winston-Salem, NC
Derived from NOAA climate normals for NC: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Humid summers and mild winters with hurricane-coast considerations narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Screen Enclosure Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Winston-Salem, NC
This Winston-Salem page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
17% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 250K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Screen Enclosure cost in Durham
North Carolina market · smaller metro · 93 cost index · ~10% higher than Winston-Salem
Compare Screen Enclosure pricing in Greensboro, NC
North Carolina market · smaller metro · 84 cost index · ~1% higher than Winston-Salem
Raleigh screen enclosure estimates
North Carolina market · mid-size metro · 93 cost index · ~10% higher than Winston-Salem
How much screen enclosure costs in Charlotte
North Carolina market · mid-size metro · 89 cost index · ~6% higher than Winston-Salem
Screen Enclosure prices around Chesapeake
South market · smaller metro · 91 cost index · ~8% higher than Winston-Salem
Garland, TX screen enclosure budget
South market · smaller metro · 90 cost index · ~7% higher than Winston-Salem
Local screen enclosure estimate for Laredo
South market · smaller metro · 80 cost index · ~3% lower than Winston-Salem
Screen Enclosure near Irving
South market · smaller metro · 91 cost index · ~8% higher than Winston-Salem
Average Cost in Winston-Salem, NC
For a typical screen enclosure scenario in Winston-Salem, NC, this calculator currently models a total around $5,822, or about $19 per square foot.
When budgeting Screen Enclosure in Winston-Salem, local quotes usually reflect conditions across North Carolina. Crawl-space moisture, clay soils, and variable code enforcement across North Carolina can change prep and drainage scopes.
In Winston-Salem, homeowners may see fewer bids, but local crews often know regional codes and typical homes in the area.
For exterior and roofing work near Winston-Salem, NC, weather exposure and access often decide whether a quote stays lean or grows once tear-off begins.
Around Winston-Salem, NC, hurricanes, humidity, and coastal exposure is the dominant exterior driver — material specs and fastening patterns often reflect humid summers and mild winters with hurricane-coast considerations.
North Carolina's housing stock skews to newer suburban single-family with mixed coastal stock, which gives Winston-Salem contractors a fairly consistent set of structural and finish patterns to bid against.
In Winston-Salem, modeled costs are currently about 17% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Winston-Salem.
Low / Mid / High Project Scenarios
Low Scenario
$2,196$15 per square foot
Small patio enclosure with standard aluminum frame, flat roof, and single door.
Mid Scenario
$7,921$20 per square foot
Mid-size pool cage with heavy-duty frame, gable roof, and sliding door.
High Scenario
$24,770$31 per square foot
Large tall enclosure with vinyl-coated frame, pet mesh, dome roof, and double door.
What Changes the Estimate Most in Winston-Salem?
- Enclosure footprint and frame material create the widest price spread between a basic patio screen and a full pool cage.
- Roof-panel integration, door systems, and fastening to existing structures are the main reasons screen-enclosure labor varies significantly.
- Motorized screens, pet-resistant mesh, and integrated gutter systems are the extras that most often expand a screen-enclosure estimate.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes roof-panel integration, motorized screens, extensive structural attachment to a masonry wall, or pool-code fencing beyond a standard screen-enclosure build.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Screen Enclosure Cost in Winston-Salem?
Aluminum screen rooms for pools and patios are priced by enclosed square footage plus the cost of mesh, roof panels, and doors. Taller spans and heavy-duty framing increase both material and labor multipliers. Many homeowner projects end up near $1,500–$15,000 depending on size and upgrades.
Cost Factors:
- Frame type — standard extrusions cost less per square foot than heavy-duty or vinyl-coated systems rated for wind and coastal exposure
- Mesh choice — no-see-um, pet, and solar meshes carry higher material rates than basic fiberglass
- Roof geometry — flat panels are simpler than gable or cathedral roofs, which need more structure and flashing detail
- Height — standard pool-cage heights keep labor efficient; taller or two-story cages need more bracing and lift time
- Doors and permits — sliding or double units and local permit fees are additive line items on top of the screened area
In Winston-Salem, home improvement costs are 17% below the national average. This reflects local labor rates, material availability, and cost of living in the Winston-Salem metro area.
Frequently Asked Questions (5)
How localized is the Screen Enclosure estimate for Winston-Salem, NC?
This page applies a South regional cost model plus local signals for Winston-Salem, NC, so totals are modeled around 17% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Winston-Salem?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. North Carolina codes and local inspection steps can change both price and schedule compared with national averages.
How much does a screen enclosure cost?
A typical residential pool or patio cage often falls roughly between $1,500 and $15,000 depending on square footage, frame grade, roof style, and height. Enter your area and options above for a breakdown by line item.
Is aluminum or another frame material better?
Aluminum is the common default for screened enclosures: it resists rust in humid climates and is available in standard and heavy-duty profiles. This calculator models aluminum tiers; always match local wind and building code requirements.
Do screen enclosures need a permit?
Many municipalities require permits for attached structures, electrical for lights or fans, and sometimes engineering for wind loads. Use the permit line in the calculator if your jurisdiction charges a flat fee.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed May 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching screen enclosure in Winston-Salem.
Screen vs full enclosure
Porch Enclosure Cost Calculator
Compare a screened-in space with a fully enclosed porch room for year-round use.
Screen enclosure for a pool
Pool Installation Cost Calculator
Useful when a pool cage or screen enclosure is part of a new pool project.
Screen enclosure on a deck
Deck Building Cost Calculator
Helpful when a screen enclosure is being added over an existing or new deck structure.
Related Calculators
Porch Enclosure Cost Calculator
Estimate porch enclosure cost by size, wall count, window type, flooring, electrical, permits, and labor.
Pool Installation Cost Calculator
Estimate pool install cost by type, size, decking, fencing, equipment, permits, and labor.
Deck Building Cost Calculator
Estimate deck construction costs by size, material type, and added features.