Door Installation Cost in Philadelphia, PA2026
Estimate door installation cost in Philadelphia, PA with local labor and material pricing. Compare interior, entry, patio, hardware, and trim packages instantly.
Project Details
Total Estimated Cost
$3,642
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Door Type
National average pricingSame default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per door |
|---|---|---|---|
| Interior Hollow-Core | $219 | $2,358 | $786 |
| Interior Solid-Core | $378 | $2,835 | $945 |
| Exterior Entry Door | $647 | $3,642 | $1,214 |
| Patio / French Door | — | $7,074 | $2,358 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Philadelphia
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Philadelphia, PA
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (PA) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $25.10 | +1.3% | ~$60/hr |
| RoofersMost relevant | 47-2181 | $24.78 | -4.3% | ~$59/hr |
| Electricians | 47-2111 | $33.95 | +5.4% | ~$81/hr |
| Plumbers & Pipefitters | 47-2152 | $33.40 | +1.7% | ~$80/hr |
| HVAC Mechanics | 49-9021 | $28.20 | -1.6% | ~$68/hr |
| Carpenters | 47-2031 | $28.65 | -1.1% | ~$69/hr |
| Construction Laborers | 47-2061 | $27.41 | +20.3% | ~$66/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Philadelphia, PA
Derived from NOAA climate normals for PA: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Cold winters, humid summers, and steady year-round rainfall narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Door Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Philadelphia, PA
This Philadelphia page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
At national baseline
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
Northeast · 1.6M city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Door Installation cost in Pittsburgh
Pennsylvania market · smaller metro · 96 cost index · ~4% lower than Philadelphia
Compare Door Installation pricing in Washington, DC
Northeast market · mid-size metro · 114 cost index · ~14% higher than Philadelphia
Boston door installation estimates
Northeast market · mid-size metro · 115 cost index · ~15% higher than Philadelphia
How much door installation costs in Baltimore
Northeast market · mid-size metro · 112 cost index · ~12% higher than Philadelphia
Door Installation prices around Newark
Northeast market · smaller metro · 118 cost index · ~18% higher than Philadelphia
Jersey City, NJ door installation budget
Northeast market · smaller metro · 119 cost index · ~19% higher than Philadelphia
Local door installation estimate for Buffalo
Northeast market · smaller metro · 99 cost index · ~1% lower than Philadelphia
Door Installation near Yonkers
Northeast market · smaller metro · 114 cost index · ~14% higher than Philadelphia
Average Cost in Philadelphia, PA
For a typical door installation scenario in Philadelphia, PA, this calculator currently models a total around $3,642, or about $1,214 per door.
When budgeting Door Installation in Philadelphia, local quotes usually reflect conditions across Pennsylvania. Stone-and-masonry construction, radon mitigation, and coal-region housing age in Pennsylvania can expand renovation scopes beyond surface finishes.
Philadelphia is a large metro where contractor availability and permit volume can move pricing and lead times as much as material choices.
In Northeast markets like Philadelphia, exterior scopes often hinge on storm history, UV exposure, and how busy local crews are.
Local conditions in Philadelphia, PA include cold winters, humid summers, and steady year-round rainfall, which often shows up in material choices and scheduling.
Older housing across Pennsylvania (~46% built pre-1970) means exterior crews near Philadelphia, PA often deal with original sheathing, knob-and-tube transitions, and additional flashing detail.
This market is currently modeled close to the national baseline, so project swings are more likely to come from scope and finish choices than from regional pricing alone.
Door installation in Philadelphia usually depends on door type, jamb condition, hardware tier, and whether the job is a simple slab swap or a more involved prehung replacement.
Low / Mid / High Project Scenarios
Low Scenario
$1,158$579 per door
A couple of interior slab swaps with basic hardware and minimal finish work.
Mid Scenario
$4,932$1,233 per door
Several prehung replacements with standard hardware and casing touch-up.
High Scenario
$8,506$2,835 per door
Premium entry or patio door scope with opening adjustments and expanded trim work.
What Changes the Estimate Most in Philadelphia?
- Door type is the biggest driver, especially when moving from simple interior slabs to entry or patio systems.
- Opening adjustments, jamb work, and trim repairs are the main reasons installation labor swings sharply.
- Exterior doors often cost more because sealing, threshold details, and hardware quality all matter at once.
When This Calculator Is Less Accurate
This calculator is less accurate when framing repairs, sidelights, transoms, accessibility modifications, or major security upgrades become part of the opening.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Door Installation Cost in Philadelphia?
Door installation usually costs about $350-3,000 per door installed depending on door type, hardware, jamb work, and finish carpentry. Interior slab swaps stay on the low end, while patio and entry doors with trim work cost much more.
Cost Factors:
- Door type — interior hollow-core doors are much cheaper than insulated entry or patio units
- Installation scope — slab swaps are simpler than full prehung replacements or opening adjustments
- Hardware — locksets, handles, hinges, and security hardware add per-door cost
- Trim and paint — casing touch-ups and finish work can materially change the total
- Opening condition — out-of-square frames, exterior sealing, and threshold work add labor
In Philadelphia, home improvement costs are at the national average. This reflects local labor rates, material availability, and cost of living in the Philadelphia metro area.
Frequently Asked Questions (5)
How localized is the Door Installation estimate for Philadelphia, PA?
This page applies a Northeast regional cost model plus local signals for Philadelphia, PA, so totals are modeled close to a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Philadelphia?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Pennsylvania codes and local inspection steps can change both price and schedule compared with national averages.
How much does door installation cost?
Door installation often costs about $350-3,000 per door installed, depending on whether it is an interior slab, prehung entry door, or patio unit. Trim work, hardware, and opening adjustments can materially raise the total.
Is a prehung door more expensive to install?
Yes. Prehung doors generally cost more to install because the full frame assembly is being replaced, which often means more alignment, shimming, casing, and finish work.
Do exterior doors cost more than interior doors?
Usually yes. Exterior doors are heavier, more weather-sensitive, and often require better hardware, flashing, sealing, and threshold detailing than basic interior doors.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching door installation in Philadelphia.
Doors and windows in one upgrade cycle
Window Replacement Cost Calculator
Useful when exterior openings are being replaced together for efficiency, appearance, or resale.
Door work with exterior cladding
Siding Installation Cost Calculator
Helpful when casing, flashing, or weather barrier details overlap with a siding project.
Finish carpentry and paint touch-ups
Interior Painting Cost Calculator
Compare the install itself with the follow-up finish work often needed around new doors.
Related Calculators
Window Replacement Cost Calculator
Estimate window replacement costs by unit count, frame material, and install complexity.
Garage Door Installation Cost Calculator
Estimate garage door replacement costs by size, insulation, opener, and framing scope.
Exterior Painting Cost Calculator
Estimate exterior painting costs by area, stories, prep work, and paint quality.