Door Installation Cost in Washington, DC2026
Estimate door installation cost in Washington, DC with local labor and material pricing. Compare interior, entry, patio, hardware, and trim packages instantly.
Project Details
Total Estimated Cost
$3,751
Adjusted for local cost of living (+14%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Washington, DC) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Door Type
Adjusted for Washington, DC (+14%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per door |
|---|---|---|---|
| Interior Hollow-Core | $219 | $2,467 | $822 |
| Interior Solid-Core | $378 | $2,944 | $981 |
| Exterior Entry Door | $647 | $3,751 | $1,250 |
| Patio / French Door | — | $7,183 | $2,394 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Washington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Washington, DC
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (DC) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $27.13 | +9.5% | ~$65/hr |
| RoofersMost relevant | 47-2181 | $25.50 | -1.5% | ~$61/hr |
| Electricians | 47-2111 | $36.92 | +14.6% | ~$89/hr |
| Plumbers & Pipefitters | 47-2152 | $38.74 | +18.0% | ~$93/hr |
| HVAC Mechanics | 49-9021 | $30.76 | +7.3% | ~$74/hr |
| Carpenters | 47-2031 | $31.22 | +7.8% | ~$75/hr |
| Construction Laborers | 47-2061 | $28.10 | +23.3% | ~$67/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Washington, DC
Derived from NOAA climate normals for DC: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Hot summers, cool winters, and four distinct seasons narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Door Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Washington, DC
This Washington page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
14% above national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
Northeast · 690K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Door Installation cost in Boston
Northeast market · mid-size metro · 115 cost index · ~1% higher than Washington
Compare Door Installation pricing in Baltimore, MD
Northeast market · mid-size metro · 112 cost index · ~2% lower than Washington
Newark door installation estimates
Northeast market · smaller metro · 118 cost index · ~4% higher than Washington
How much door installation costs in Pittsburgh
Northeast market · smaller metro · 96 cost index · ~18% lower than Washington
Door Installation prices around Jersey City
Northeast market · smaller metro · 119 cost index · ~5% higher than Washington
Buffalo, NY door installation budget
Northeast market · smaller metro · 99 cost index · ~15% lower than Washington
Local door installation estimate for Yonkers
Northeast market · smaller metro · 114 cost index · similar local pricing
Door Installation near Rochester
Northeast market · smaller metro · 100 cost index · ~14% lower than Washington
Average Cost in Washington, DC
For a typical door installation scenario in Washington, DC, this calculator currently models a total around $3,751, or about $1,250 per door.
When budgeting Door Installation in Washington, local quotes usually reflect conditions across District of Columbia. Historic preservation rules, limited staging space, and multi-jurisdictional codes make DC renovation work more logistics-heavy.
Contractors serving Washington often balance local jobs with regional work, which can affect how quickly crews can start.
For exterior and roofing work near Washington, DC, weather exposure and access often decide whether a quote stays lean or grows once tear-off begins.
Annual weather in Washington (41" of rainfall, ~3 freezing months) typically influences both crew scheduling and exterior product specs.
Washington's older rowhouses and historic-district buildings can change tear-off scope quickly once decking, fascia, or trim conditions are exposed.
In Washington, modeled costs are currently about 14% above the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader northeast regional cost pressure.
Door installation in Washington usually depends on door type, jamb condition, hardware tier, and whether the job is a simple slab swap or a more involved prehung replacement.
Low / Mid / High Project Scenarios
Low Scenario
$1,230$615 per door
A couple of interior slab swaps with basic hardware and minimal finish work.
Mid Scenario
$5,106$1,277 per door
Several prehung replacements with standard hardware and casing touch-up.
High Scenario
$8,664$2,888 per door
Premium entry or patio door scope with opening adjustments and expanded trim work.
What Changes the Estimate Most in Washington?
- Door type is the biggest driver, especially when moving from simple interior slabs to entry or patio systems.
- Opening adjustments, jamb work, and trim repairs are the main reasons installation labor swings sharply.
- Exterior doors often cost more because sealing, threshold details, and hardware quality all matter at once.
When This Calculator Is Less Accurate
This calculator is less accurate when framing repairs, sidelights, transoms, accessibility modifications, or major security upgrades become part of the opening.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Door Installation Cost in Washington?
Door installation usually costs about $350-3,000 per door installed depending on door type, hardware, jamb work, and finish carpentry. Interior slab swaps stay on the low end, while patio and entry doors with trim work cost much more.
Cost Factors:
- Door type — interior hollow-core doors are much cheaper than insulated entry or patio units
- Installation scope — slab swaps are simpler than full prehung replacements or opening adjustments
- Hardware — locksets, handles, hinges, and security hardware add per-door cost
- Trim and paint — casing touch-ups and finish work can materially change the total
- Opening condition — out-of-square frames, exterior sealing, and threshold work add labor
In Washington, home improvement costs are 14% above the national average. This reflects local labor rates, material availability, and cost of living in the Washington metro area.
Frequently Asked Questions (5)
How localized is the Door Installation estimate for Washington, DC?
This page applies a Northeast regional cost model plus local signals for Washington, DC, so totals are modeled around 14% above a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Washington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. District of Columbia codes and local inspection steps can change both price and schedule compared with national averages.
How much does door installation cost?
Door installation often costs about $350-3,000 per door installed, depending on whether it is an interior slab, prehung entry door, or patio unit. Trim work, hardware, and opening adjustments can materially raise the total.
Is a prehung door more expensive to install?
Yes. Prehung doors generally cost more to install because the full frame assembly is being replaced, which often means more alignment, shimming, casing, and finish work.
Do exterior doors cost more than interior doors?
Usually yes. Exterior doors are heavier, more weather-sensitive, and often require better hardware, flashing, sealing, and threshold detailing than basic interior doors.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching door installation in Washington.
Doors and windows in one upgrade cycle
Window Replacement Cost Calculator
Useful when exterior openings are being replaced together for efficiency, appearance, or resale.
Door work with exterior cladding
Siding Installation Cost Calculator
Helpful when casing, flashing, or weather barrier details overlap with a siding project.
Finish carpentry and paint touch-ups
Interior Painting Cost Calculator
Compare the install itself with the follow-up finish work often needed around new doors.
Related Calculators
Window Replacement Cost Calculator
Estimate window replacement costs by unit count, frame material, and install complexity.
Garage Door Installation Cost Calculator
Estimate garage door replacement costs by size, insulation, opener, and framing scope.
Exterior Painting Cost Calculator
Estimate exterior painting costs by area, stories, prep work, and paint quality.