Foundation Waterproofing Cost in Arlington, TX2026
Estimate foundation waterproofing cost in Arlington, TX with local labor and material pricing. Compare crack sealing, membrane systems, drainage, and excavation scope instantly.
Project Details
Total Estimated Cost
$13,005
Adjusted for local cost of living (-9%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Arlington, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Waterproofing Method
Adjusted for Arlington, TX (-9%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per lf |
|---|---|---|---|
| Crack Seal / Spot Waterproofing | $27.86 | $7,672 | $96 |
| Exterior Membrane System | $94.53 | $13,005 | $163 |
| Full Waterproofing + Protection Board | — | $16,963 | $212 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Arlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Arlington, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| RoofersMost relevant | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Electricians | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Arlington, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Long, hot summers and short, mild winters with strong storm exposure narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Foundation Waterproofing Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Arlington, TX
This Arlington page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
9% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 394K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Foundation Waterproofing cost in Corpus Christi
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Compare Foundation Waterproofing pricing in Plano, TX
Texas market · smaller metro · 94 cost index · ~3% higher than Arlington
Lubbock foundation waterproofing estimates
Texas market · smaller metro · 78 cost index · ~13% lower than Arlington
How much foundation waterproofing costs in Irving
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Foundation Waterproofing prices around Laredo
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Garland, TX foundation waterproofing budget
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Local foundation waterproofing estimate for Frisco
Texas market · smaller metro · 93 cost index · ~2% higher than Arlington
Foundation Waterproofing near Amarillo
Texas market · smaller metro · 79 cost index · ~12% lower than Arlington
Average Cost in Arlington, TX
For a typical foundation waterproofing scenario in Arlington, TX, this calculator currently models a total around $13,005, or about $163 per linear foot.
When budgeting Foundation Waterproofing in Arlington, local quotes usually reflect conditions across Texas. Texas markets often see hail, heat, and wide seasonal demand swings that can tighten exterior crew schedules.
Contractors serving Arlington often balance local jobs with regional work, which can affect how quickly crews can start.
In South markets like Arlington, exterior scopes often hinge on storm history, UV exposure, and how busy local crews are.
Exterior projects in Arlington typically have to plan around extreme heat, hurricanes, and hail, with roughly 28" of annual rainfall and long, hot summers and short, mild winters with strong storm exposure.
Arlington's newer newer single-family with slab foundations and storm-rated roofing typically lets exterior quotes stay closer to the initial scope unless storm damage or HOA rules change the spec.
In Arlington, modeled costs are currently about 9% below the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Foundation waterproofing in Arlington often depends on the wall length, excavation access, drainage strategy, and whether the plan calls for localized sealing or a full exterior membrane system.
Low / Mid / High Project Scenarios
Low Scenario
$1,804$72 per linear foot
Localized sealing and basic water-control work on a shorter foundation run.
Mid Scenario
$14,014$175 per linear foot
A standard exterior membrane and drainage scope on a common basement wall section.
High Scenario
$44,036$275 per linear foot
A broad waterproofing project with deeper excavation, drainage, and interior mitigation.
What Changes the Estimate Most in Arlington?
- Waterproofing method is the biggest driver because spot sealing and full exterior membrane systems are fundamentally different scopes.
- Drainage work often controls the real price because waterproofing alone may not solve the water problem without better water management.
- Excavation access and depth can materially change labor, especially around tight lot lines, decks, porches, or utilities.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes full basement interior systems, sump reconfiguration, severe structural cracking, or complex multi-side excavation around difficult site obstacles.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Foundation Waterproofing Cost in Arlington?
Foundation waterproofing usually costs about $70-260 per linear foot depending on the waterproofing method, drainage scope, excavation difficulty, and interior mitigation work. Spot crack sealing stays near the low end, while full exterior membrane systems with drainage cost much more.
Cost Factors:
- Waterproofing method is the biggest driver because spot sealing is far cheaper than full excavation and exterior membrane work
- Drainage scope materially affects the total because footing drains, grading, and water-control upgrades are often what make waterproofing actually last
- Excavation access can raise costs quickly when crews must work around decks, porches, utilities, or tight property lines
- Interior mitigation may still be needed even when exterior work is the main focus
- Depth, soil conditions, and repeated water intrusion are the main reasons waterproofing projects grow beyond a simple crack repair
In Arlington, home improvement costs are 9% below the national average. This reflects local labor rates, material availability, and cost of living in the Arlington metro area.
Frequently Asked Questions (5)
How localized is the Foundation Waterproofing estimate for Arlington, TX?
This page applies a South regional cost model plus local signals for Arlington, TX, so totals are modeled around 9% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Arlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does foundation waterproofing cost?
Foundation waterproofing often costs about $70-260 per linear foot depending on whether the work is a localized seal, a full membrane system, or a larger drainage-heavy project. Excavation and water-management scope can materially affect the total.
Why is excavation such a big part of foundation waterproofing?
Because exterior waterproofing usually requires exposing the wall, cleaning the surface, applying the system, and rebuilding drainage layers. Access and digging often become major cost drivers.
Does waterproofing always include drainage work?
Not always, but often it should. Waterproofing membranes help, yet many recurring foundation moisture problems come from poor drainage, grading, or missing footing drains that also need correction.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching foundation waterproofing in Arlington.
Waterproofing with structural repair
Foundation Repair Cost Calculator
Useful when water intrusion and structural movement may need to be solved together rather than as separate projects.
Manage exterior water and soil pressure
Retaining Wall Cost Calculator
Helpful when slope support and drainage around the home shell may overlap with the waterproofing plan.
Envelope repair after moisture issues
Stucco Repair Cost Calculator
Compare below-grade waterproofing with visible exterior cladding repairs when recurring water problems affect more than one surface.
Related Calculators
Basement Waterproofing Cost Calculator
Estimate basement waterproofing costs by size, method, drainage, sump, and protection scope.
Crawl Space Encapsulation Cost Calculator
Estimate crawl space encapsulation costs by area, liner system, drainage, and dehumidification.
Foundation Repair Cost Calculator
Estimate foundation repair costs by repair length, piers, crack severity, and drainage.
Sump Pump Installation Cost Calculator
Estimate sump pump installation costs by pump type, pit work, backup, and discharge.