Sump Pump Installation Cost in Arlington, TX2026
Estimate sump pump installation cost in Arlington, TX with local labor and material pricing. Compare pump packages, backup systems, pit work, and discharge routing instantly.
Project Details
Total Estimated Cost
$4,940
Adjusted for local cost of living (-9%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Arlington, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Pump Package
Adjusted for Arlington, TX (-9%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Basic Sump Replacement | $846 | $3,995 | $0 |
| Standard New Sump System | — | $4,940 | $0 |
| Premium / Heavy-Duty System | $3,184 | $6,333 | $0 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Arlington
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Arlington, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| RoofersMost relevant | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Electricians | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| HVAC Mechanics | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Arlington, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Long, hot summers and short, mild winters with strong storm exposure narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Sump Pump Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Arlington, TX
This Arlington page currently uses modeled local pricing based on south regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.
Relative cost level
9% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Modeled regional CPI
This city currently uses regional CPI, state housing data, and metro premium modeling.
Market profile
South · 394K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Sump Pump Installation cost in Corpus Christi
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Compare Sump Pump Installation pricing in Plano, TX
Texas market · smaller metro · 94 cost index · ~3% higher than Arlington
Lubbock sump pump installation estimates
Texas market · smaller metro · 78 cost index · ~13% lower than Arlington
How much sump pump installation costs in Irving
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Sump Pump Installation prices around Laredo
Texas market · smaller metro · 80 cost index · ~11% lower than Arlington
Garland, TX sump pump installation budget
Texas market · smaller metro · 90 cost index · ~1% lower than Arlington
Local sump pump installation estimate for Frisco
Texas market · smaller metro · 93 cost index · ~2% higher than Arlington
Sump Pump Installation near Amarillo
Texas market · smaller metro · 79 cost index · ~12% lower than Arlington
Average Cost in Arlington, TX
For a typical sump pump installation scenario in Arlington, TX, this calculator currently models a total around $4,940.
When budgeting Sump Pump Installation in Arlington, local quotes usually reflect conditions across Texas. Texas markets often see hail, heat, and wide seasonal demand swings that can tighten exterior crew schedules.
Contractors serving Arlington often balance local jobs with regional work, which can affect how quickly crews can start.
For exterior and roofing work near Arlington, TX, weather exposure and access often decide whether a quote stays lean or grows once tear-off begins.
Around Arlington, TX, extreme heat, hurricanes, and hail is the dominant exterior driver — material specs and fastening patterns often reflect long, hot summers and short, mild winters with strong storm exposure.
38% of Texas housing is post-2000, which usually means Arlington exteriors are framed against newer codes, engineered trusses, and standardized roof pitches.
In Arlington, modeled costs are currently about 9% below the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Sump pump installation in Arlington often varies with whether the job is a simple replacement or a full new system with pit work, backup power, discharge routing, and electrical coordination.
Low / Mid / High Project Scenarios
Low Scenario
$2,560A basic sump replacement reusing most of the existing setup.
Mid Scenario
$4,960A standard new sump system with pit work and typical discharge routing.
High Scenario
$11,010A premium sump install with backup power, heavier pit work, and more complex routing.
What Changes the Estimate Most in Arlington?
- Pit and basin work are often the biggest difference between a simple pump swap and a brand-new sump system.
- Backup power can materially increase the budget, but it is often one of the most valuable upgrades in flood-prone areas.
- Discharge routing and electrical scope are the main reasons similarly sized sump jobs price differently.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes major drain-tile integration, generator work, unusually long discharge routing, or structural concrete modifications beyond a standard sump installation.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Sump Pump Installation Cost in Arlington?
Sump pump installation usually costs about $2,000-8,000 depending on whether you are replacing an existing unit or installing a full new system with pit work, backup power, discharge routing, and electrical upgrades.
Cost Factors:
- Pump package is a major driver, especially when moving from a basic replacement to a heavier-duty or premium system
- Pit and basin work often adds substantially when there is no existing sump setup to reuse
- Backup systems can materially raise the total but are common where flooding risk or outages are concerns
- Discharge routing matters because long or difficult exterior runs add labor and materials
- Electrical work can change the estimate quickly when a dedicated circuit or new controls are needed
In Arlington, home improvement costs are 9% below the national average. This reflects local labor rates, material availability, and cost of living in the Arlington metro area.
Frequently Asked Questions (5)
How localized is the Sump Pump Installation estimate for Arlington, TX?
This page applies a South regional cost model plus local signals for Arlington, TX, so totals are modeled around 9% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Arlington?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does sump pump installation cost?
Sump pump installation often costs about $2,000-8,000 depending on whether the job is a basic replacement or a full new system with pit work, backup power, discharge routing, and electrical scope.
Is a battery backup worth it for a sump pump?
Often yes, especially in flood-prone areas or where power outages are common. A backup system can keep water moving when the primary pump or electrical supply fails.
Why does a new sump pit cost more than replacing a pump?
Because cutting concrete, creating the basin, routing discharge, and tying in electrical or drainage work is much more involved than simply swapping an existing pump.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching sump pump installation in Arlington.
Sump system with basement waterproofing
Basement Waterproofing Cost Calculator
Helpful when a pump install is only one part of a broader basement water-control plan.
Pump install vs exterior drainage work
Foundation Waterproofing Cost Calculator
Useful when deciding how much of the water problem should be handled inside versus outside the foundation.
Manage water under the home shell
Crawl Space Encapsulation Cost Calculator
Compare sump work with encapsulation when moisture problems affect crawl spaces rather than basements.
Related Calculators
Basement Waterproofing Cost Calculator
Estimate basement waterproofing costs by size, method, drainage, sump, and protection scope.
Foundation Waterproofing Cost Calculator
Estimate foundation waterproofing costs by length, method, drainage, and excavation.
Crawl Space Encapsulation Cost Calculator
Estimate crawl space encapsulation costs by area, liner system, drainage, and dehumidification.