House Wrap Cost in St. Louis, MO2026
Estimate house wrap and weather barrier cost in St. Louis, MO with local labor pricing. Compare Tyvek, premium WRB, tape, flashing, and tear-off scenarios instantly.
In St. Louis, MO, house wrap typically costs between $1,031 and $8,049 as of August 2026, or about $1 per square foot for a typical project, based on BLS labor data and producer price indexes adjusted for local metro pricing.
Pricing data updated · Sources: BLS OEWS, BLS PPI, FRED, U.S. Census
Project Details
Total Estimated Cost
$2,339
Adjusted for local cost of living (-11%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (St. Louis, MO) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: August 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Wrap Grade
Adjusted for St. Louis, MO (-11%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Builder Wrap | $0.25 | $2,039 | $1 |
| Tyvek HomeWrap | $0.4 | $2,339 | $1 |
| Premium WRB / Commercial | $0.65 | $2,839 | $1 |
| High-Performance Drainable WRB | $0.9 | $3,339 | $2 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting St. Louis
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.9
+2.8% vs Jul 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near St. Louis, MO
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (MO) | vs national | Loaded billing rate |
|---|---|---|---|---|
| PaintersMost relevant | 47-2141 | $24.42 | -1.5% | ~$59/hr |
| RoofersMost relevant | 47-2181 | $25.63 | -1.0% | ~$62/hr |
| Electricians | 47-2111 | $33.95 | +5.4% | ~$81/hr |
| Plumbers & Pipefitters | 47-2152 | $33.56 | +2.2% | ~$81/hr |
| HVAC Mechanics | 49-9021 | $27.45 | -4.2% | ~$66/hr |
| Carpenters | 47-2031 | $29.06 | +0.3% | ~$70/hr |
| Construction Laborers | 47-2061 | $25.18 | +10.5% | ~$60/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in St. Louis, MO
Derived from NOAA climate normals for MO: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Humid summers and cold winters with frequent severe weather narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
House Wrap Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for St. Louis, MO
This St. Louis page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
11% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
Midwest · 302K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
House Wrap cost in Springfield
Missouri market · smaller metro · 80 cost index · ~9% lower than St. Louis
Compare House Wrap pricing in Columbia, MO
Missouri market · smaller metro · 82 cost index · ~7% lower than St. Louis
Kansas City house wrap estimates
Missouri market · mid-size metro · 84 cost index · ~5% lower than St. Louis
How much house wrap costs in Cincinnati
Midwest market · smaller metro · 88 cost index · ~1% lower than St. Louis
House Wrap prices around Saint Paul
Midwest market · smaller metro · 93 cost index · ~4% higher than St. Louis
Lincoln, NE house wrap budget
Midwest market · smaller metro · 79 cost index · ~10% lower than St. Louis
Local house wrap estimate for Madison
Midwest market · smaller metro · 90 cost index · ~1% higher than St. Louis
House Wrap near Toledo
Midwest market · smaller metro · 81 cost index · ~8% lower than St. Louis
Average Cost in St. Louis, MO
For a typical house wrap scenario in St. Louis, MO, this calculator currently models a total around $2,339, or about $1 per square foot.
When budgeting House Wrap in St. Louis, local quotes usually reflect conditions across Missouri. Tornado-belt exposure and expansive soils across Missouri can influence roofing demand surges and foundation repair needs.
In St. Louis, homeowners may see fewer bids, but local crews often know regional codes and typical homes in the area.
Roofing and siding quotes around St. Louis, MO frequently change once crews inspect deck condition, flashing, and story height in the field.
Around St. Louis, MO, tornadoes, ice events, and humidity is the dominant exterior driver — material specs and fastening patterns often reflect humid summers and cold winters with frequent severe weather.
Missouri's housing stock skews to older single-family with mixed-era Midwestern stock, which gives St. Louis contractors a fairly consistent set of structural and finish patterns to bid against.
In St. Louis, modeled costs are currently about 11% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader midwest regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in St. Louis.
Low / Mid / High Project Scenarios
Low Scenario
$1,031$1 per square foot
Single-story new construction with builder wrap and seam tape only—no tear-off.
Mid Scenario
$2,535$1 per square foot
Typical two-story Tyvek install with standard tape and window flashing on ~2,000 sq ft of wall.
High Scenario
$8,049$3 per square foot
Premium drainable WRB on a tall home with full flashing and heavy old-wrap tear-off.
What Changes the Estimate Most in St. Louis?
- Wrap grade creates the first major gap between basic builder wrap and premium drainable weather-resistive barriers.
- Tape and flashing scope often rivals sheet-goods cost when windows, doors, and penetrations need full detailing.
- Story height plus old wrap removal raise labor fastest on multi-story remodels with difficult access.
When This Calculator Is Less Accurate
This calculator is less accurate when sheathing repair, mold remediation, rigid foam continuity, rainscreen furring, or complex fenestration details expand the weather-barrier scope beyond a standard residential wrap install.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does House Wrap Cost in St. Louis?
House wrap installation typically costs about $0.50–$2.50 per square foot installed in 2026, depending on wrap grade, tape and flashing detail, story height, and whether old wrap must be removed. Builder wrap sits on the low end, while Tyvek and premium drainable weather-resistive barriers cost more once labor and flashing are included.
Cost Factors:
- Wrap grade — builder wrap is cheapest; Tyvek and premium drainable WRBs raise material cost and often install time
- Tape and flashing — window, door, and penetration detailing can add as much as the sheet goods themselves
- Story height and access — multi-story walls need more staging and labor than single-story installs
- Old wrap removal — tear-off and disposal add cost on remodels that are not new construction
- Wall condition — damaged sheathing, wet spots, or missing housewrap overlaps can expand the scope after the wrap comes off
In St. Louis, home improvement costs are 11% below the national average. This reflects local labor rates, material availability, and cost of living in the St. Louis metro area.
Frequently Asked Questions (6)
How localized is the House Wrap estimate for St. Louis, MO?
This page applies a Midwest regional cost model plus local signals for St. Louis, MO, so totals are modeled around 11% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in St. Louis?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Missouri codes and local inspection steps can change both price and schedule compared with national averages.
How much does house wrap cost per square foot?
Installed house wrap usually runs about $0.50–$2.50 per square foot in 2026. Material alone is often $0.25–$0.90 per square foot, with labor, tape, and flashing making up the rest of the installed price.
Is Tyvek worth more than builder wrap?
Tyvek and similar branded wraps usually cost more than basic builder wrap but offer better tear resistance and vapor performance. Premium drainable WRBs cost still more and are common behind higher-end siding or in wet climates.
Do I need to remove old house wrap before installing new wrap?
On new construction there is no tear-off. On remodels, damaged or poorly detailed wrap is often removed so the new weather barrier can lap correctly at windows, doors, and penetrations. Removal typically adds about $0.25–$0.45 per square foot.
Does house wrap include window and door flashing?
Not always. Basic installs may include only seam tape, while a full package covers window openings, door thresholds, and exterior penetrations. Flashing scope is one of the biggest cost swings after wrap grade itself.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed August 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching house wrap in St. Louis.
Budget the siding over the wrap
Siding Installation Cost Calculator
House wrap is usually installed just before or with siding, so pairing both estimates keeps the exterior envelope budget aligned.
Finish painted exteriors
Exterior Painting Cost Calculator
Useful when comparing a wrap-plus-siding path with exterior paint refresh on walls that already have sound cladding.
Coordinate wall insulation
Insulation Cost Calculator
Helpful when cavity or continuous insulation work is planned alongside the weather-resistive barrier upgrade.
Related Calculators
Siding Installation Cost Calculator
Estimate siding replacement costs by material, wall area, and tear-off scope.
Exterior Painting Cost Calculator
Estimate exterior painting costs by area, stories, prep work, and paint quality.
Insulation Cost Calculator
Estimate insulation upgrade costs by area, insulation type, and project scope.