Landscape Lighting Cost in New York, NY2026

Estimate landscape lighting cost in New York, NY with local labor and material pricing. Compare fixture count, transformer size, controls, trenching complexity, and labor instantly.

Project Details

Number of Fixtures

Fixture Tier (each)

Transformer & Power Package

Wiring & Trenching Complexity

Controls & Zoning

Total Estimated Cost

$1,791

Adjusted for local cost of living (+12%)

Cost Breakdown

Landscape Fixtures$945

Transformer & Power Package$378

Controls & Zoning$0

Installation Labor$468

Installed Cost per Light$179

Cost Distribution

Landscape Fixtures (53%)

Transformer & Power Package (21%)

Installation Labor (26%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (New York, NY) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Landscape Lighting Cost by City

National Average New York, NY Los Angeles, CA Chicago, IL Houston, TX Phoenix, AZ Philadelphia, PA San Antonio, TX San Diego, CA Dallas, TX San Jose, CA Austin, TX Jacksonville, FL Columbus, OH Charlotte, NC San Francisco, CA Indianapolis, IN Seattle, WA Denver, CO Washington, DC Nashville, TN Oklahoma City, OK Boston, MA El Paso, TX Detroit, MI Portland, OR Las Vegas, NV Memphis, TN Louisville, KY Baltimore, MD Milwaukee, WI Albuquerque, NM Tucson, AZ Fresno, CA Sacramento, CA Kansas City, MO Mesa, AZ Atlanta, GA Omaha, NE Long Beach, CA Raleigh, NC Virginia Beach, VA Miami, FL Oakland, CA Minneapolis, MN Tulsa, OK Bakersfield, CA Wichita, KS Arlington, TX Aurora, CO Tampa, FL Cleveland, OH Anaheim, CA Honolulu, HI Lexington, KY Stockton, CA Corpus Christi, TX Henderson, NV Riverside, CA Newark, NJ Saint Paul, MN Cincinnati, OH Irvine, CA Orlando, FL St. Louis, MO Pittsburgh, PA Greensboro, NC Lincoln, NE Jersey City, NJ Plano, TX Durham, NC Buffalo, NY Chandler, AZ Madison, WI Reno, NV Lubbock, TX Winston-Salem, NC Scottsdale, AZ Norfolk, VA Boise, ID Salt Lake City, UT New Orleans, LA Fort Worth, TX Toledo, OH St. Petersburg, FL Richmond, VA Spokane, WA Huntsville, AL Tacoma, WA Baton Rouge, LA Des Moines, IA Rochester, NY Worcester, MA Little Rock, AR Knoxville, TN Grand Rapids, MI Birmingham, AL Providence, RI Fort Lauderdale, FL Mobile, AL Charleston, SC Jackson, MS Colorado Springs, CO Anchorage, AK Gilbert, AZ Fort Wayne, IN North Las Vegas, NV Hialeah, FL Chesapeake, VA Glendale, AZ Garland, TX Irving, TX Laredo, TX Modesto, CA San Bernardino, CA Moreno Valley, CA Fontana, CA Port St. Lucie, FL Oxnard, CA Augusta, GA Amarillo, TX Montgomery, AL Frisco, TX Grand Prairie, TX McKinney, TX Overland Park, KS Peoria, AZ Vancouver, WA Shreveport, LA Brownsville, TX Newport News, VA Tempe, AZ Chattanooga, TN Cape Coral, FL Santa Rosa, CA Salem, OR Eugene, OR Ontario, CA Rancho Cucamonga, CA Sioux Falls, SD Springfield, MO Clarksville, TN Garden Grove, CA Oceanside, CA Bellevue, WA Macon, GA Surprise, AZ Murfreesboro, TN Killeen, TX Alexandria, VA Hayward, CA Pomona, CA Sunnyvale, CA Escondido, CA Fort Collins, CO Akron, OH Tallahassee, FL Naperville, IL Rockford, IL Bridgeport, CT Savannah, GA Syracuse, NY McAllen, TX Gainesville, FL Columbia, SC New Haven, CT Stamford, CT Midland, TX Hampton, VA Santa Clarita, CA Huntington Beach, CA Yonkers, NY Temecula, CA Pembroke Pines, FL Hollywood, FL Peoria, IL Lakeland, FL Hartford, CT Dayton, OH Cedar Rapids, IA Columbia, MO Fargo, ND Ann Arbor, MI Lansing, MI Provo, UT Manchester, NH Billings, MT Fayetteville, AR Green Bay, WI Ogden, UT Duluth, MN Lafayette, LA Flint, MI Missoula, MT Appleton, WI Rapid City, SD Wilmington, DE Portland, ME Greenville, SC Cheyenne, WY Sarasota, FL Charleston, WV Burlington, VT

Local Market Context for New York, NY

This New York page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.

Relative cost level

12% above national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Direct metro CPI

This city has a direct metro inflation series in the market data snapshot.

Market profile

Northeast · 8.3M city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Compare Nearby Markets

Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.

Landscape Lighting in Buffalo, NY

Northeast market · 99 cost index

Landscape Lighting in Yonkers, NY

Northeast market · 114 cost index

Landscape Lighting in Rochester, NY

Northeast market · 100 cost index

Landscape Lighting in Syracuse, NY

Northeast market · 97 cost index

Average Cost in New York, NY

For a typical landscape lighting scenario in New York, NY, this calculator currently models a total around $1,791, or about $179 per light.

When budgeting Landscape Lighting in New York, local quotes usually reflect conditions across New York. New York City permit complexity, co-op/condo board approvals, and union labor requirements can substantially affect metro project timelines.

New York's size often means more specialty trades to choose from, though coordination across inspections and HOA rules can add time.

In New York, HVAC and electrical pricing can shift quickly once duct paths, venting, or service upgrades become part of the same job.

In New York, modeled costs are currently about 12% above the national baseline. That usually reflects a mix of large-metro labor pricing, subcontractor availability, and broader northeast regional cost pressure.

Landscape lighting in New York usually depends on fixture count, trenching difficulty, transformer capacity, and how much control flexibility the homeowner wants in the final design.

Low / Mid / High Project Scenarios

Low Scenario

$743

$124 per light

A modest path-light project with basic fixtures and easy cable routing.

Mid Scenario

$1,978

$198 per light

A standard outdoor lighting layout with mixed fixtures and a timer-based transformer.

High Scenario

$7,145

$298 per light

A larger premium landscape-lighting design with more trenching and smart control zones.

What Changes the Estimate Most in New York?

Fixture count and fixture tier usually move the estimate more than any other variables.
Wiring runs, trenching, and hardscape crossings are the main reasons labor rises quickly on outdoor lighting jobs.
Transformers, zoning, and smart controls are the most common extras that separate a basic path-light layout from a custom lighting design.

When This Calculator Is Less Accurate

This calculator is less accurate when the project includes extensive hardscape demolition, custom architectural lighting design, line-voltage systems, or large-property zoning beyond a standard residential low-voltage installation.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Landscape Lighting Cost in New York?

Landscape lighting installation often costs about $120-450 per fixture depending on fixture quality, transformer size, trenching complexity, and control upgrades. Simple path-light layouts stay cheaper than larger mixed systems with uplighting, zones, and smart controls.

Cost Factors:

Fixture tier matters because brass uplights and premium outdoor fixtures cost much more than simple path lights
Transformer size and controls influence the budget when the system needs more capacity, timers, photocells, or app-based zoning
Wiring and trenching complexity is a major labor driver, especially when lights cross hardscape or longer planting areas
A mixed design with path lights, spots, and accent lighting often costs more than a simple repetitive fixture layout
Landscape lighting is usually low voltage, but the installation still depends on good routing, aiming, and weather-rated connections

In New York, home improvement costs are 12% above the national average. This reflects local labor rates, material availability, and cost of living in the New York metro area.

Frequently Asked Questions (5)

How localized is the Landscape Lighting estimate for New York, NY?

This page applies a Northeast regional cost model plus local signals for New York, NY, so totals are modeled around 12% above a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in New York?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. New York codes and local inspection steps can change both price and schedule compared with national averages.

How much does landscape lighting cost?

Landscape lighting often lands around $120-450 per fixture installed depending on fixture quality, wiring complexity, transformer size, and control upgrades. Small path-light systems are cheaper than larger custom accent-lighting layouts.

What affects landscape lighting cost the most?

Fixture count, fixture quality, and wiring difficulty usually matter most. Long runs, multiple lighting zones, and premium brass fixtures can raise the total quickly.

Is low-voltage landscape lighting expensive to install?

It is usually more affordable than line-voltage exterior lighting, but the system still needs fixtures, a transformer, cable runs, and labor to route and aim everything correctly. Larger custom layouts can still become a meaningful outdoor-project expense.

Data Sources & Methodology

Base costs — national average rates from industry publications, contractor surveys, and home improvement platforms.
Regional adjustments — derived from BLS Consumer Price Index, including direct metro CPI coverage for major cities where available.
Housing and income signals — lightly refined using U.S. Census ACS state-level median income and home value data.
Inflation tracking — adjusted using Producer Price Index for Construction, with FRED as a fallback data source for compatible series.

Last updated: April 2026. Market indices can be refreshed monthly via BLS, with Census and FRED fallback inputs. Estimates are approximate and may vary ±15–30%.

Explore Related Project Costs

These are common next-step comparisons for people researching landscape lighting in New York.

Outdoor lighting around a new deck