HC
HomeCostCalc.com

Landscape Lighting Cost in Pittsburgh, PA2026

Estimate landscape lighting cost in Pittsburgh, PA with local labor and material pricing. Compare fixture count, transformer size, controls, trenching complexity, and labor instantly.

Project Details

Total Estimated Cost

$1,737

Adjusted for local cost of living (-2%)

Cost Breakdown

Landscape Fixtures$947
Transformer & Power Package$379
Controls & Zoning$0
Installation Labor$410
Installed Cost per Light$174

Cost Distribution

Landscape Fixtures (55%)
Transformer & Power Package (22%)
Installation Labor (24%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Pittsburgh, PA) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Typical Project Cost by Fixture Tier (each)

Adjusted for Pittsburgh, PA (-2%)

Same default project size (default scope), priced across each material tier.

TierMaterial rateTotal projectInstalled per light
Basic LED Path Lights$44.87$1,238$124
Mid-Range Spot / Path Mix$94.72$1,737$174
Premium Brass Fixtures$179$2,579$258

Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.

Recent Cost Trends Affecting Pittsburgh

Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.

Residential Construction PPI — Trailing 12 Months

BLS series PCU236211236211, single-family construction producer prices.

200.6

+4.0% vs May 25

192194197199202192.9200.6May 25Jul 25Sep 25Nov 25Jan 26Mar 26

The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.

Local Labor Rates Near Pittsburgh, PA

State-level mean hourly wages from BLS OEWS, May 2023.

TradeSOCMean hourly (PA)vs nationalLoaded billing rate
ElectriciansMost relevant47-2111$33.95+5.4%~$81/hr
Plumbers & Pipefitters47-2152$33.40+1.7%~$80/hr
HVAC Mechanics49-9021$28.20-1.6%~$68/hr
Carpenters47-2031$28.65-1.1%~$69/hr
Painters47-2141$25.10+1.3%~$60/hr
Roofers47-2181$24.78-4.3%~$59/hr
Construction Laborers47-2061$27.41+20.3%~$66/hr

"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.

Best Months to Schedule Interior painting in Pittsburgh, PA

Derived from NOAA climate normals for PA: heating/cooling degree days, freeze months, and annual precipitation.

Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec

Why these months

Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.

Booking tip

Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.

Landscape Lighting Cost by City

Browse all 202 cities by state
National Average

Alaska

Delaware

District of Columbia

Hawaii

Idaho

Maryland

Massachusetts

Mississippi

Nebraska

New Hampshire

New Mexico

North Dakota

Rhode Island

Vermont

West Virginia

Wyoming

Local Market Context for Pittsburgh, PA

This Pittsburgh page currently uses modeled local pricing based on northeast regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

2% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

Northeast · 303K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Average Cost in Pittsburgh, PA

For a typical landscape lighting scenario in Pittsburgh, PA, this calculator currently models a total around $1,737, or about $174 per light.

When budgeting Landscape Lighting in Pittsburgh, local quotes usually reflect conditions across Pennsylvania. Stone-and-masonry construction, radon mitigation, and coal-region housing age in Pennsylvania can expand renovation scopes beyond surface finishes.

Pittsburgh pricing still tracks Northeast labor signals, even when the local contractor pool is smaller.

In Pittsburgh, HVAC and electrical pricing can shift quickly once duct paths, venting, or service upgrades become part of the same job.

Local conditions in Pittsburgh, PA include cold winters, humid summers, and steady year-round rainfall, which often shows up in material choices and scheduling.

Older stock dominates Pittsburgh: think older brick rowhouses and mature single-family stock where finish-layer demolition can uncover lead paint, asbestos, or out-of-spec plumbing.

In Pittsburgh, modeled costs are currently about 2% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader northeast regional cost pressure.

Landscape lighting in Pittsburgh usually depends on fixture count, trenching difficulty, transformer capacity, and how much control flexibility the homeowner wants in the final design.

Low / Mid / High Project Scenarios

Low Scenario

$712

$119 per light

A modest path-light project with basic fixtures and easy cable routing.

Mid Scenario

$1,920

$192 per light

A standard outdoor lighting layout with mixed fixtures and a timer-based transformer.

High Scenario

$6,937

$289 per light

A larger premium landscape-lighting design with more trenching and smart control zones.

What Changes the Estimate Most in Pittsburgh?

  • Fixture count and fixture tier usually move the estimate more than any other variables.
  • Wiring runs, trenching, and hardscape crossings are the main reasons labor rises quickly on outdoor lighting jobs.
  • Transformers, zoning, and smart controls are the most common extras that separate a basic path-light layout from a custom lighting design.

When This Calculator Is Less Accurate

This calculator is less accurate when the project includes extensive hardscape demolition, custom architectural lighting design, line-voltage systems, or large-property zoning beyond a standard residential low-voltage installation.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Landscape Lighting Cost in Pittsburgh?

Landscape lighting installation often costs about $120-450 per fixture depending on fixture quality, transformer size, trenching complexity, and control upgrades. Simple path-light layouts stay cheaper than larger mixed systems with uplighting, zones, and smart controls.

Cost Factors:

  • Fixture tier matters because brass uplights and premium outdoor fixtures cost much more than simple path lights
  • Transformer size and controls influence the budget when the system needs more capacity, timers, photocells, or app-based zoning
  • Wiring and trenching complexity is a major labor driver, especially when lights cross hardscape or longer planting areas
  • A mixed design with path lights, spots, and accent lighting often costs more than a simple repetitive fixture layout
  • Landscape lighting is usually low voltage, but the installation still depends on good routing, aiming, and weather-rated connections

In Pittsburgh, home improvement costs are 2% below the national average. This reflects local labor rates, material availability, and cost of living in the Pittsburgh metro area.

Frequently Asked Questions (5)
How localized is the Landscape Lighting estimate for Pittsburgh, PA?

This page applies a Northeast regional cost model plus local signals for Pittsburgh, PA, so totals are modeled close to a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Pittsburgh?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Pennsylvania codes and local inspection steps can change both price and schedule compared with national averages.

How much does landscape lighting cost?

Landscape lighting often lands around $120-450 per fixture installed depending on fixture quality, wiring complexity, transformer size, and control upgrades. Small path-light systems are cheaper than larger custom accent-lighting layouts.

What affects landscape lighting cost the most?

Fixture count, fixture quality, and wiring difficulty usually matter most. Long runs, multiple lighting zones, and premium brass fixtures can raise the total quickly.

Is low-voltage landscape lighting expensive to install?

It is usually more affordable than line-voltage exterior lighting, but the system still needs fixtures, a transformer, cable runs, and labor to route and aim everything correctly. Larger custom layouts can still become a meaningful outdoor-project expense.

Data sources & methodology

Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.

Read the full methodology →