Metal Roofing Cost in Fargo, ND2026

Estimate metal roofing cost in Fargo, ND with local labor and material pricing. Compare corrugated, exposed-fastener, standing-seam, trim, and tear-off scope instantly.

Project Details

Roof Area(sq ft)

Metal Roof System

Roof Slope

Old Roof Removal

Underlayment Package

Trim, Ridge & Flashing Package

Total Estimated Cost

$32,617

Adjusted for local cost of living (-18%)

Cost Breakdown

Metal Panels$19,712

Tear-Off & Disposal$2,618

Underlayment$2,398

Trim, Ridge & Flashing$1,791

Installation Labor$6,098

Cost per Square Foot$15

Cost Distribution

Metal Panels (60%)

Tear-Off & Disposal (8%)

Underlayment (7%)

Trim, Ridge & Flashing (5%)

Installation Labor (19%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Fargo, ND) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Metal Roofing Cost by City

National Average New York, NY Los Angeles, CA Chicago, IL Houston, TX Phoenix, AZ Philadelphia, PA San Antonio, TX San Diego, CA Dallas, TX San Jose, CA Austin, TX Jacksonville, FL Columbus, OH Charlotte, NC San Francisco, CA Indianapolis, IN Seattle, WA Denver, CO Washington, DC Nashville, TN Oklahoma City, OK Boston, MA El Paso, TX Detroit, MI Portland, OR Las Vegas, NV Memphis, TN Louisville, KY Baltimore, MD Milwaukee, WI Albuquerque, NM Tucson, AZ Fresno, CA Sacramento, CA Kansas City, MO Mesa, AZ Atlanta, GA Omaha, NE Long Beach, CA Raleigh, NC Virginia Beach, VA Miami, FL Oakland, CA Minneapolis, MN Tulsa, OK Bakersfield, CA Wichita, KS Arlington, TX Aurora, CO Tampa, FL Cleveland, OH Anaheim, CA Honolulu, HI Lexington, KY Stockton, CA Corpus Christi, TX Henderson, NV Riverside, CA Newark, NJ Saint Paul, MN Cincinnati, OH Irvine, CA Orlando, FL St. Louis, MO Pittsburgh, PA Greensboro, NC Lincoln, NE Jersey City, NJ Plano, TX Durham, NC Buffalo, NY Chandler, AZ Madison, WI Reno, NV Lubbock, TX Winston-Salem, NC Scottsdale, AZ Norfolk, VA Boise, ID Salt Lake City, UT New Orleans, LA Fort Worth, TX Toledo, OH St. Petersburg, FL Richmond, VA Spokane, WA Huntsville, AL Tacoma, WA Baton Rouge, LA Des Moines, IA Rochester, NY Worcester, MA Little Rock, AR Knoxville, TN Grand Rapids, MI Birmingham, AL Providence, RI Fort Lauderdale, FL Mobile, AL Charleston, SC Jackson, MS Colorado Springs, CO Anchorage, AK Gilbert, AZ Fort Wayne, IN North Las Vegas, NV Hialeah, FL Chesapeake, VA Glendale, AZ Garland, TX Irving, TX Laredo, TX Modesto, CA San Bernardino, CA Moreno Valley, CA Fontana, CA Port St. Lucie, FL Oxnard, CA Augusta, GA Amarillo, TX Montgomery, AL Frisco, TX Grand Prairie, TX McKinney, TX Overland Park, KS Peoria, AZ Vancouver, WA Shreveport, LA Brownsville, TX Newport News, VA Tempe, AZ Chattanooga, TN Cape Coral, FL Santa Rosa, CA Salem, OR Eugene, OR Ontario, CA Rancho Cucamonga, CA Sioux Falls, SD Springfield, MO Clarksville, TN Garden Grove, CA Oceanside, CA Bellevue, WA Macon, GA Surprise, AZ Murfreesboro, TN Killeen, TX Alexandria, VA Hayward, CA Pomona, CA Sunnyvale, CA Escondido, CA Fort Collins, CO Akron, OH Tallahassee, FL Naperville, IL Rockford, IL Bridgeport, CT Savannah, GA Syracuse, NY McAllen, TX Gainesville, FL Columbia, SC New Haven, CT Stamford, CT Midland, TX Hampton, VA Santa Clarita, CA Huntington Beach, CA Yonkers, NY Temecula, CA Pembroke Pines, FL Hollywood, FL Peoria, IL Lakeland, FL Hartford, CT Dayton, OH Cedar Rapids, IA Columbia, MO Fargo, ND Ann Arbor, MI Lansing, MI Provo, UT Manchester, NH Billings, MT Fayetteville, AR Green Bay, WI Ogden, UT Duluth, MN Lafayette, LA Flint, MI Missoula, MT Appleton, WI Rapid City, SD Wilmington, DE Portland, ME Greenville, SC Cheyenne, WY Sarasota, FL Charleston, WV Burlington, VT

Local Market Context for Fargo, ND

This Fargo page currently uses modeled local pricing based on midwest regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

18% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

Midwest · 127K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Compare Nearby Markets

Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.

Metal Roofing in Columbia, MO

Midwest market · 79 cost index

Metal Roofing in Ann Arbor, MI

Midwest market · 88 cost index

Metal Roofing in Dayton, OH

Midwest market · 76 cost index

Metal Roofing in Cedar Rapids, IA

Midwest market · 78 cost index

Average Cost in Fargo, ND

For a typical metal roofing scenario in Fargo, ND, this calculator currently models a total around $32,617, or about $15 per square foot.

When budgeting Metal Roofing in Fargo, local quotes usually reflect conditions across North Dakota. Oil-field labor competition and limited contractor pools in western North Dakota can push trade rates above what population alone would suggest.

Fargo pricing still tracks Midwest labor signals, even when the local contractor pool is smaller.

Roofing and siding quotes around Fargo, ND frequently change once crews inspect deck condition, flashing, and story height in the field.

In Fargo, modeled costs are currently about 18% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader midwest regional cost pressure.

Metal roofing in Fargo often varies with panel system choice, slope difficulty, trim detail, and whether the job is a cleaner re-cover or a full tear-off and underlayment rebuild.

Low / Mid / High Project Scenarios

Low Scenario

$13,546

$10 per square foot

A simpler corrugated metal roof with no tear-off and basic trim work.

Mid Scenario

$32,758

$15 per square foot

A common residential exposed-fastener metal roof with standard tear-off and trim.

High Scenario

$97,972

$27 per square foot

A larger standing-seam installation on a steeper roof with premium assembly details.

What Changes the Estimate Most in Fargo?

Panel system is the biggest driver, especially once a quote moves from corrugated or exposed-fastener panels into standing seam.
Trim, flashing, and underlayment choices often create more price spread than homeowners expect from panel area alone.
Slope and tear-off scope are the main reasons similarly sized metal roofs land in very different labor ranges.

When This Calculator Is Less Accurate

This calculator is less accurate when the roof includes structural deck repair, custom snow-retention systems, specialty curved panels, solar integration, or unusually complex flashing conditions.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Metal Roofing Cost in Fargo?

Metal roofing usually costs about $8-24 per square foot depending on panel type, roof slope, tear-off needs, underlayment package, and trim details. Corrugated and exposed-fastener systems stay near the low end, while standing seam and premium assemblies cost more.

Cost Factors:

Panel system is the biggest driver because exposed-fastener metal roofs cost much less than standing-seam systems
Roof slope materially affects labor when installers need more safety setup and slower panel handling on steeper roofs
Tear-off and disposal can add meaningful cost before the metal roof installation even begins
Trim, ridge, and penetration flashing details often separate a budget quote from a more complete roof system
Underlayment selection matters more on metal roofs because heat, condensation control, and waterproof tie-ins all affect performance

In Fargo, home improvement costs are 18% below the national average. This reflects local labor rates, material availability, and cost of living in the Fargo metro area.

Frequently Asked Questions (5)

How localized is the Metal Roofing estimate for Fargo, ND?

This page applies a Midwest regional cost model plus local signals for Fargo, ND, so totals are modeled around 18% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Fargo?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. North Dakota codes and local inspection steps can change both price and schedule compared with national averages.

How much does metal roofing cost?

Metal roofing often costs about $8-24 per square foot depending on whether the project uses corrugated panels, exposed-fastener residential metal, or standing seam. Slope, trim details, and tear-off scope can materially affect the total.

Why is standing-seam metal more expensive?

Because the panels, clips, trim, and labor are all more involved than simpler exposed-fastener systems. Many homeowners pay more for the cleaner appearance, concealed fasteners, and longer expected service life.

Can metal roofing go over shingles?

Sometimes, but it depends on local code, the condition of the existing roof, manufacturer requirements, and whether the contractor wants a cleaner substrate for the new system. Tear-off is still common on many residential projects.

Data Sources & Methodology

Base costs — national average rates from industry publications, contractor surveys, and home improvement platforms.
Regional adjustments — derived from BLS Consumer Price Index, including direct metro CPI coverage for major cities where available.
Housing and income signals — lightly refined using U.S. Census ACS state-level median income and home value data.
Inflation tracking — adjusted using Producer Price Index for Construction, with FRED as a fallback data source for compatible series.

Last updated: April 2026. Market indices can be refreshed monthly via BLS, with Census and FRED fallback inputs. Estimates are approximate and may vary ±15–30%.

Explore Related Project Costs

These are common next-step comparisons for people researching metal roofing in Fargo.

Compare metal to other full roof systems