Metal Roofing Cost in St. Louis, MO2026
Estimate metal roofing cost in St. Louis, MO with local labor and material pricing. Compare corrugated, exposed-fastener, standing-seam, trim, and tear-off scope instantly.
Project Details
Total Estimated Cost
$32,988
Adjusted for local cost of living (-13%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (St. Louis, MO) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Metal Roof System
Adjusted for St. Louis, MO (-13%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per sqft |
|---|---|---|---|
| Corrugated / Agricultural Panel | $5.97 | $26,410 | $12 |
| Exposed-Fastener Residential Metal | $8.96 | $32,988 | $15 |
| Standing-Seam Metal | — | $46,122 | $21 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting St. Louis
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near St. Louis, MO
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (MO) | vs national | Loaded billing rate |
|---|---|---|---|---|
| RoofersMost relevant | 47-2181 | $25.63 | -1.0% | ~$62/hr |
| Electricians | 47-2111 | $33.95 | +5.4% | ~$81/hr |
| Plumbers & Pipefitters | 47-2152 | $33.56 | +2.2% | ~$81/hr |
| HVAC Mechanics | 49-9021 | $27.45 | -4.2% | ~$66/hr |
| Carpenters | 47-2031 | $29.06 | +0.3% | ~$70/hr |
| Painters | 47-2141 | $24.42 | -1.5% | ~$59/hr |
| Construction Laborers | 47-2061 | $25.18 | +10.5% | ~$60/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Roof replacement & repair in St. Louis, MO
Derived from NOAA climate normals for MO: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Mixed-season weather (42" annual rain, 4 freeze months) means shoulder months avoid summer storms and winter freeze-thaw on flashing.
Booking tip
Reach out 6–8 weeks before your target install month to lock in a crew before peak demand.
Metal Roofing Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for St. Louis, MO
This St. Louis page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
13% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
Midwest · 302K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Metal Roofing cost in Springfield
Missouri market · smaller metro · 77 cost index · ~10% lower than St. Louis
Compare Metal Roofing pricing in Columbia, MO
Missouri market · smaller metro · 79 cost index · ~8% lower than St. Louis
Kansas City metal roofing estimates
Missouri market · mid-size metro · 81 cost index · ~6% lower than St. Louis
How much metal roofing costs in Cincinnati
Midwest market · smaller metro · 84 cost index · ~3% lower than St. Louis
Metal Roofing prices around Saint Paul
Midwest market · smaller metro · 94 cost index · ~7% higher than St. Louis
Lincoln, NE metal roofing budget
Midwest market · smaller metro · 77 cost index · ~10% lower than St. Louis
Local metal roofing estimate for Madison
Midwest market · smaller metro · 89 cost index · ~2% higher than St. Louis
Metal Roofing near Toledo
Midwest market · smaller metro · 78 cost index · ~9% lower than St. Louis
Average Cost in St. Louis, MO
For a typical metal roofing scenario in St. Louis, MO, this calculator currently models a total around $32,988, or about $15 per square foot.
When budgeting Metal Roofing in St. Louis, local quotes usually reflect conditions across Missouri. Tornado-belt exposure and expansive soils across Missouri can influence roofing demand surges and foundation repair needs.
In St. Louis, homeowners may see fewer bids, but local crews often know regional codes and typical homes in the area.
For exterior and roofing work near St. Louis, MO, weather exposure and access often decide whether a quote stays lean or grows once tear-off begins.
Exterior projects in St. Louis typically have to plan around tornadoes, ice events, and humidity, with roughly 42" of annual rainfall and humid summers and cold winters with frequent severe weather.
Missouri's housing stock skews to older single-family with mixed-era Midwestern stock, which gives St. Louis contractors a fairly consistent set of structural and finish patterns to bid against.
In St. Louis, modeled costs are currently about 13% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader midwest regional cost pressure.
Metal roofing in St. Louis often varies with panel system choice, slope difficulty, trim detail, and whether the job is a cleaner re-cover or a full tear-off and underlayment rebuild.
Low / Mid / High Project Scenarios
Low Scenario
$13,771$10 per square foot
A simpler corrugated metal roof with no tear-off and basic trim work.
Mid Scenario
$33,129$15 per square foot
A common residential exposed-fastener metal roof with standard tear-off and trim.
High Scenario
$98,733$27 per square foot
A larger standing-seam installation on a steeper roof with premium assembly details.
What Changes the Estimate Most in St. Louis?
- Panel system is the biggest driver, especially once a quote moves from corrugated or exposed-fastener panels into standing seam.
- Trim, flashing, and underlayment choices often create more price spread than homeowners expect from panel area alone.
- Slope and tear-off scope are the main reasons similarly sized metal roofs land in very different labor ranges.
When This Calculator Is Less Accurate
This calculator is less accurate when the roof includes structural deck repair, custom snow-retention systems, specialty curved panels, solar integration, or unusually complex flashing conditions.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Metal Roofing Cost in St. Louis?
Metal roofing usually costs about $8-24 per square foot depending on panel type, roof slope, tear-off needs, underlayment package, and trim details. Corrugated and exposed-fastener systems stay near the low end, while standing seam and premium assemblies cost more.
Cost Factors:
- Panel system is the biggest driver because exposed-fastener metal roofs cost much less than standing-seam systems
- Roof slope materially affects labor when installers need more safety setup and slower panel handling on steeper roofs
- Tear-off and disposal can add meaningful cost before the metal roof installation even begins
- Trim, ridge, and penetration flashing details often separate a budget quote from a more complete roof system
- Underlayment selection matters more on metal roofs because heat, condensation control, and waterproof tie-ins all affect performance
In St. Louis, home improvement costs are 13% below the national average. This reflects local labor rates, material availability, and cost of living in the St. Louis metro area.
Frequently Asked Questions (5)
How localized is the Metal Roofing estimate for St. Louis, MO?
This page applies a Midwest regional cost model plus local signals for St. Louis, MO, so totals are modeled around 13% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in St. Louis?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Missouri codes and local inspection steps can change both price and schedule compared with national averages.
How much does metal roofing cost?
Metal roofing often costs about $8-24 per square foot depending on whether the project uses corrugated panels, exposed-fastener residential metal, or standing seam. Slope, trim details, and tear-off scope can materially affect the total.
Why is standing-seam metal more expensive?
Because the panels, clips, trim, and labor are all more involved than simpler exposed-fastener systems. Many homeowners pay more for the cleaner appearance, concealed fasteners, and longer expected service life.
Can metal roofing go over shingles?
Sometimes, but it depends on local code, the condition of the existing roof, manufacturer requirements, and whether the contractor wants a cleaner substrate for the new system. Tear-off is still common on many residential projects.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching metal roofing in St. Louis.
Compare metal to other full roof systems
Roof Replacement Cost Calculator
Useful when deciding whether a metal roof makes more sense than a broader roof-replacement path with other materials.
Restore an existing roof instead of replacing it
Roof Coating Cost Calculator
Helpful when weighing a new metal roof against a lower-cost restoration path for a serviceable existing roof.
Inspect the roof before choosing metal
Roof Inspection Cost Calculator
Compare full replacement pricing with the inspection step that helps confirm whether the existing roof structure and condition support the plan.
Related Calculators
Roof Replacement Cost Calculator
Estimate roof replacement costs by material, size, and roof complexity.
Roof Coating Cost Calculator
Estimate roof coating costs by area, coating system, prep, repairs, and warranty.
Roof Inspection Cost Calculator
Estimate roof inspection costs by size, inspection type, complexity, and report scope.