Oven & Range Installation Cost in Houston, TX2026
Estimate oven, range, or cooktop installation cost in Houston, TX by appliance type, gas-line work, electrical, anti-tip bracket, and haul-away.
Project Details
Total Estimated Cost
$227
Adjusted for local cost of living (-16%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Houston, TX) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Appliance type
Adjusted for Houston, TX (-16%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Slide-in electric range | — | $185 | $185 |
| Slide-in gas range | — | $227 | $227 |
| Dual-fuel range | $249 | $269 | $269 |
| Induction range | $299 | $311 | $311 |
| Double wall oven | $348 | $352 | $352 |
| Pro-style 36-48" range | $398 | $394 | $394 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Houston
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Houston, TX
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (TX) | vs national | Loaded billing rate |
|---|---|---|---|---|
| ElectriciansMost relevant | 47-2111 | $28.14 | -12.6% | ~$68/hr |
| HVAC MechanicsMost relevant | 49-9021 | $25.10 | -12.4% | ~$60/hr |
| Plumbers & Pipefitters | 47-2152 | $28.40 | -13.5% | ~$68/hr |
| Carpenters | 47-2031 | $22.43 | -22.5% | ~$54/hr |
| Painters | 47-2141 | $20.51 | -17.2% | ~$49/hr |
| Roofers | 47-2181 | $20.52 | -20.7% | ~$49/hr |
| Construction Laborers | 47-2061 | $18.95 | -16.8% | ~$45/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Houston, TX
Derived from NOAA climate normals for TX: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Oven & Range Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Houston, TX
This Houston page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
16% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
South · 2.3M city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Oven & Range Installation cost in San Antonio
Texas market · major metro · 86 cost index · ~2% higher than Houston
Compare Oven & Range Installation pricing in Dallas, TX
Texas market · major metro · 92 cost index · ~8% higher than Houston
Austin oven & range installation estimates
Texas market · mid-size metro · 97 cost index · ~13% higher than Houston
How much oven & range installation costs in Fort Worth
Texas market · mid-size metro · 92 cost index · ~8% higher than Houston
Oven & Range Installation prices around El Paso
Texas market · mid-size metro · 80 cost index · ~4% lower than Houston
Arlington, TX oven & range installation budget
Texas market · mid-size metro · 91 cost index · ~7% higher than Houston
Local oven & range installation estimate for Corpus Christi
Texas market · smaller metro · 80 cost index · ~4% lower than Houston
Oven & Range Installation near Plano
Texas market · smaller metro · 94 cost index · ~10% higher than Houston
Average Cost in Houston, TX
For a typical oven & range installation scenario in Houston, TX, this calculator currently models a total around $227, or about $227 per unit.
When budgeting Oven & Range Installation in Houston, local quotes usually reflect conditions across Texas. Expansive clay soils across much of Texas are a primary driver of foundation repair needs and can affect grading, drainage, and slab work.
Houston's size often means more specialty trades to choose from, though coordination across inspections and HOA rules can add time.
In Houston, South labor conditions set the baseline, but project totals still move most when scope changes during demolition.
Local conditions in Houston, TX include long, hot summers and short, mild winters with strong storm exposure, which often shows up in material choices and scheduling.
Local building patterns in Houston mostly come from newer single-family with slab foundations and storm-rated roofing, which influences how crews price prep, demolition, and finish coordination.
In Houston, modeled costs are currently about 16% below the national baseline. That usually reflects a mix of large-metro labor pricing, subcontractor availability, and broader south regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Houston.
Low / Mid / High Project Scenarios
Low Scenario
$186$186 per square foot
Single slide-in electric range on existing outlet with anti-tip bracket.
Mid Scenario
$478$478 per square foot
Slide-in gas range with extended gas line, anti-tip, recirculating vent, curb pickup.
High Scenario
$1,691$1,691 per square foot
Pro-style 36-48" range with new gas line, new 240V circuit, ducted vent through wall, recycler disposal.
What Changes the Estimate Most in Houston?
- Like-for-like fuel swaps are cheap; converting between gas and electric typically adds $500–1,000 in plumbing or electrical.
- Pro-style 36-48" ranges and double wall ovens take more crew time and may need cabinet trim adjustments.
- Ducted vent hood retrofits through an exterior wall add the most labor when no existing duct is present.
When This Calculator Is Less Accurate
This calculator is less accurate when the install includes pro-style 48-60" range hoods, make-up-air systems required by code for high-CFM hoods, custom built-in ovens with millwork, or commercial-grade gas pressure regulators.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Oven & Range Installation Cost in Houston?
Oven and range installation typically costs $150–400 for like-for-like swaps using existing utilities, with installs that involve gas-line extensions, new 240V circuits, or fuel conversions reaching $700–1,500+. Pro-style and dual-fuel ranges add cost on the appliance side and may need cabinetry trim or hood upgrades to clear code.
Cost Factors:
- Appliance type — electric and gas slide-ins are simplest; pro-style 36-48" ranges and double wall ovens take longer
- Gas-line work — extending vs running a new black-iron line vs converting from electric
- Electrical work — induction and electric ranges need a 240V/50A circuit; pro models may need 50A+
- Anti-tip bracket — required by code on virtually all freestanding ranges
- Hood and venting — ducted hoods cost more but are required by code over many gas ranges
In Houston, home improvement costs are 16% below the national average. This reflects local labor rates, material availability, and cost of living in the Houston metro area.
Frequently Asked Questions (5)
How localized is the Oven & Range Installation estimate for Houston, TX?
This page applies a South regional cost model plus local signals for Houston, TX, so totals are modeled around 16% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Houston?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Texas codes and local inspection steps can change both price and schedule compared with national averages.
How much does it cost to install an oven or range?
Like-for-like swaps using existing gas or electric hookups typically cost $150–400. Adding a new 240V circuit runs $300–800, extending a gas line $150–400, and a full fuel conversion can exceed $1,000. Most installs land $200–500 all-in.
Can I install a range myself?
Electric range swaps with existing outlets are reasonable DIY jobs. Gas connections should be done by a licensed plumber to ensure leak-free connections and code compliance. Many municipalities also require permits for any new gas-line work or new 240V circuits.
Do I need a vent hood over my range?
Most jurisdictions require a vent hood over gas ranges. Recirculating hoods are cheaper but less effective; ducted hoods that exhaust outdoors are strongly recommended for cooking, indoor air quality, and resale value. A ducted retrofit through an exterior wall costs $300–700 in labor plus the hood itself.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching oven & range installation in Houston.
Range install plus vent hood
Range Hood Installation Cost Calculator
Useful when matching a new range to a new ducted vent hood.
Range plus kitchen sink install
Kitchen Sink Installation Cost Calculator
Helpful when bundling kitchen-appliance plumbing into one project.
Range plus dishwasher install
Dishwasher Installation Cost Calculator
Compare two common kitchen-appliance installs scheduled together.
Related Calculators
Range Hood Installation Cost Calculator
Estimate range hood install cost by hood type, venting, electrical work, cabinet changes, and labor.
Kitchen Sink Installation Cost Calculator
Estimate kitchen sink install cost by sink type, countertop modifications, plumbing scope, and labor.
Dishwasher Installation Cost Calculator
Estimate dishwasher install cost by model tier, hookups, electrical work, trim, haul-away, and labor.