HC
HomeCostCalc.com

Oven & Range Installation Cost in Salt Lake City, UT2026

Estimate oven, range, or cooktop installation cost in Salt Lake City, UT by appliance type, gas-line work, electrical, anti-tip bracket, and haul-away.

Project Details

Total Estimated Cost

$277

Adjusted for local cost of living (+9%)

Cost Breakdown

Installation Labor$217
Gas-Line Work$0
Electrical Work$0
Anti-Tip Bracket$30
Vent / Hood Kit$0
Haul-Away$30
Cost per Unit$277

Cost Distribution

Installation Labor (78%)
Anti-Tip Bracket (11%)
Haul-Away (11%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Salt Lake City, UT) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Typical Project Cost by Appliance type

Adjusted for Salt Lake City, UT (+9%)

Same default project size (default scope), priced across each material tier.

TierMaterial rateTotal projectInstalled per unit
Slide-in electric range$222$222
Slide-in gas range$277$277
Dual-fuel range$249$331$331
Induction range$299$386$386
Double wall oven$348$439$439
Pro-style 36-48" range$398$494$494

Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.

Recent Cost Trends Affecting Salt Lake City

Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.

Residential Construction PPI — Trailing 12 Months

BLS series PCU236211236211, single-family construction producer prices.

200.1

+0.9% vs Mar 25

198199200201202198.4200.1Mar 25May 25Jul 25Sep 25Nov 25Jan 26

The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.

Local Labor Rates Near Salt Lake City, UT

State-level mean hourly wages from BLS OEWS, May 2023.

TradeSOCMean hourly (UT)vs nationalLoaded billing rate
ElectriciansMost relevant47-2111$30.20-6.2%~$72/hr
HVAC MechanicsMost relevant49-9021$26.94-6.0%~$65/hr
Plumbers & Pipefitters47-2152$29.85-9.1%~$72/hr
Carpenters47-2031$25.10-13.3%~$60/hr
Painters47-2141$21.58-12.9%~$52/hr
Roofers47-2181$22.40-13.4%~$54/hr
Construction Laborers47-2061$21.30-6.5%~$51/hr

"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.

Best Months to Schedule Interior painting in Salt Lake City, UT

Derived from NOAA climate normals for UT: heating/cooling degree days, freeze months, and annual precipitation.

Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec

Why these months

Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.

Booking tip

Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.

Oven & Range Installation Cost by City

Browse all 202 cities by state
National Average

Alaska

Delaware

District of Columbia

Hawaii

Idaho

Maryland

Massachusetts

Mississippi

Nebraska

New Hampshire

New Mexico

North Dakota

Rhode Island

Vermont

West Virginia

Wyoming

Local Market Context for Salt Lake City, UT

This Salt Lake City page currently uses modeled local pricing based on west regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

9% above national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

West · 199K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Average Cost in Salt Lake City, UT

For a typical oven & range installation scenario in Salt Lake City, UT, this calculator currently models a total around $277, or about $277 per unit.

When budgeting Oven & Range Installation in Salt Lake City, local quotes usually reflect conditions across Utah. Wasatch Front growth, inversion-season air-quality rules, and altitude-related UV in Utah can shape material choices and scheduling.

Smaller markets like Salt Lake City can see fewer specialty crews on short notice, so scheduling and travel minimums sometimes matter more than in major cities.

Home improvement quotes near Salt Lake City, UT are most sensitive to scope clarity, access, and which finishes are included versus "allowance only."

Local conditions in Salt Lake City, UT include cold, dry winters and hot, dry summers, which often shows up in material choices and scheduling.

Local building patterns in Salt Lake City mostly come from newer suburban single-family with cold-climate envelopes, which influences how crews price prep, demolition, and finish coordination.

In Salt Lake City, modeled costs are currently about 9% above the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader west regional cost pressure.

Local labor conditions, permit timing, and finish selection all influence how this project prices in Salt Lake City.

Low / Mid / High Project Scenarios

Low Scenario

$224

$224 per square foot

Single slide-in electric range on existing outlet with anti-tip bracket.

Mid Scenario

$528

$528 per square foot

Slide-in gas range with extended gas line, anti-tip, recirculating vent, curb pickup.

High Scenario

$1,791

$1,791 per square foot

Pro-style 36-48" range with new gas line, new 240V circuit, ducted vent through wall, recycler disposal.

What Changes the Estimate Most in Salt Lake City?

  • Like-for-like fuel swaps are cheap; converting between gas and electric typically adds $500–1,000 in plumbing or electrical.
  • Pro-style 36-48" ranges and double wall ovens take more crew time and may need cabinet trim adjustments.
  • Ducted vent hood retrofits through an exterior wall add the most labor when no existing duct is present.

When This Calculator Is Less Accurate

This calculator is less accurate when the install includes pro-style 48-60" range hoods, make-up-air systems required by code for high-CFM hoods, custom built-in ovens with millwork, or commercial-grade gas pressure regulators.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Oven & Range Installation Cost in Salt Lake City?

Oven and range installation typically costs $150–400 for like-for-like swaps using existing utilities, with installs that involve gas-line extensions, new 240V circuits, or fuel conversions reaching $700–1,500+. Pro-style and dual-fuel ranges add cost on the appliance side and may need cabinetry trim or hood upgrades to clear code.

Cost Factors:

  • Appliance type — electric and gas slide-ins are simplest; pro-style 36-48" ranges and double wall ovens take longer
  • Gas-line work — extending vs running a new black-iron line vs converting from electric
  • Electrical work — induction and electric ranges need a 240V/50A circuit; pro models may need 50A+
  • Anti-tip bracket — required by code on virtually all freestanding ranges
  • Hood and venting — ducted hoods cost more but are required by code over many gas ranges

In Salt Lake City, home improvement costs are 9% above the national average. This reflects local labor rates, material availability, and cost of living in the Salt Lake City metro area.

Frequently Asked Questions (5)
How localized is the Oven & Range Installation estimate for Salt Lake City, UT?

This page applies a West regional cost model plus local signals for Salt Lake City, UT, so totals are modeled around 9% above a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Salt Lake City?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Utah codes and local inspection steps can change both price and schedule compared with national averages.

How much does it cost to install an oven or range?

Like-for-like swaps using existing gas or electric hookups typically cost $150–400. Adding a new 240V circuit runs $300–800, extending a gas line $150–400, and a full fuel conversion can exceed $1,000. Most installs land $200–500 all-in.

Can I install a range myself?

Electric range swaps with existing outlets are reasonable DIY jobs. Gas connections should be done by a licensed plumber to ensure leak-free connections and code compliance. Many municipalities also require permits for any new gas-line work or new 240V circuits.

Do I need a vent hood over my range?

Most jurisdictions require a vent hood over gas ranges. Recirculating hoods are cheaper but less effective; ducted hoods that exhaust outdoors are strongly recommended for cooking, indoor air quality, and resale value. A ducted retrofit through an exterior wall costs $300–700 in labor plus the hood itself.

Data sources & methodology

Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.

Read the full methodology →