Radon Mitigation Cost in Boston, MA2026
Estimate radon mitigation system cost in Boston, MA by foundation type, system style, number of suction points, fan grade, and electrical work.
Project Details
Total Estimated Cost
$1,878
Adjusted for local cost of living (+15%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Boston, MA) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: April 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Foundation type
Adjusted for Boston, MA (+15%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per unit |
|---|---|---|---|
| Slab on grade | $896 | $1,679 | $0 |
| Full basement | — | $1,878 | $0 |
| Crawl space | — | $2,276 | $0 |
| Mixed / split-level | — | $2,574 | $0 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Boston
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.1
+0.9% vs Mar 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Boston, MA
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (MA) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Construction LaborersMost relevant | 47-2061 | $33.94 | +48.9% | ~$81/hr |
| Electricians | 47-2111 | $40.98 | +27.2% | ~$98/hr |
| Plumbers & Pipefitters | 47-2152 | $39.61 | +20.7% | ~$95/hr |
| HVAC Mechanics | 49-9021 | $33.16 | +15.7% | ~$80/hr |
| Carpenters | 47-2031 | $33.45 | +15.5% | ~$80/hr |
| Painters | 47-2141 | $28.04 | +13.2% | ~$67/hr |
| Roofers | 47-2181 | $30.60 | +18.2% | ~$73/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Exterior painting in Boston, MA
Derived from NOAA climate normals for MA: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Latex paints cure best between roughly 50–85°F with low humidity. Cold, snowy winters and humid summers with coastal exposure narrows the ideal cure window to these months.
Booking tip
Schedule exterior paint at least 24 hours after the last rain and avoid days with heavy dew.
Radon Mitigation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Boston, MA
This Boston page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
15% above national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
Northeast · 676K city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Radon Mitigation cost in Worcester
Massachusetts market · smaller metro · 110 cost index · ~5% lower than Boston
Compare Radon Mitigation pricing in Washington, DC
Northeast market · mid-size metro · 114 cost index · ~1% lower than Boston
Baltimore radon mitigation estimates
Northeast market · mid-size metro · 112 cost index · ~3% lower than Boston
How much radon mitigation costs in Newark
Northeast market · smaller metro · 118 cost index · ~3% higher than Boston
Radon Mitigation prices around Pittsburgh
Northeast market · smaller metro · 96 cost index · ~19% lower than Boston
Jersey City, NJ radon mitigation budget
Northeast market · smaller metro · 119 cost index · ~4% higher than Boston
Local radon mitigation estimate for Buffalo
Northeast market · smaller metro · 99 cost index · ~16% lower than Boston
Radon Mitigation near Yonkers
Northeast market · smaller metro · 114 cost index · ~1% lower than Boston
Average Cost in Boston, MA
For a typical radon mitigation scenario in Boston, MA, this calculator currently models a total around $1,878.
When budgeting Radon Mitigation in Boston, local quotes usually reflect conditions across Massachusetts. Massachusetts' older housing and cold winters often add envelope, insulation, and code-compliance layers to remodel work.
In Boston, pricing is usually responsive to regional labor rates, with less "big-city premium" than the largest U.S. metros.
For projects around Boston, MA, the fastest way to compare apples-to-apples is aligned scope: materials, tear-out, permits, and cleanup.
Annual weather in Boston (48" of rainfall, ~4 freezing months) typically influences both crew scheduling and exterior product specs.
Massachusetts's housing stock skews to older New England housing with deep historic stock, which gives Boston contractors a fairly consistent set of structural and finish patterns to bid against.
In Boston, modeled costs are currently about 15% above the national baseline. That usually reflects a mix of mid-sized metro labor pricing, subcontractor availability, and broader northeast regional cost pressure.
Local labor conditions, permit timing, and finish selection all influence how this project prices in Boston.
Low / Mid / High Project Scenarios
Low Scenario
$1,126Single-point passive system on a slab home with existing outlet.
Mid Scenario
$1,886Active sub-slab depressurization on a basement with one suction point and short-term post-test.
High Scenario
$5,029Sub-membrane crawl-space system on a split-level with three suction points, premium fan, and continuous monitor.
What Changes the Estimate Most in Boston?
- Foundation type sets the baseline: slab is cheapest, basement is mid-range, and crawl space requires sub-membrane work that costs more.
- Number of suction points is driven by foundation complexity — split-level and large homes commonly need 2–3 points.
- Fan grade and electrical work (existing outlet vs new circuit) account for $200–700 of variation between similar systems.
When This Calculator Is Less Accurate
This calculator is less accurate when the home has multiple disconnected foundations, sub-slab voids that require sealing before depressurization, very high baseline radon (>20 pCi/L) needing multi-fan or HRV-integrated systems, or commercial-scale buildings.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Radon Mitigation Cost in Boston?
A residential radon mitigation system typically costs $800–3,000 installed, depending on foundation type, system style, number of suction points, fan grade, and electrical work. Active sub-slab depressurization on a single-foundation slab home is on the low end; sub-membrane crawl-space systems and drain-tile or sump-integrated designs cost more. EPA Zone 1 areas (most of the Midwest, Appalachia, Mountain West) see the highest demand.
Cost Factors:
- Foundation type — slab is cheapest, basements are mid-range, and crawl spaces or split-levels cost more
- System type — passive systems are cheaper but less effective; active sub-slab depressurization is the standard
- Suction points — single-point systems cover most homes; complex foundations need multiple points at ~$350 each
- Fan grade — standard, high-suction, and ultra-quiet premium fans span a 2× range
- Electrical and venting routing — new outlets, attic runs, and rooftop terminations add labor time
In Boston, home improvement costs are 15% above the national average. This reflects local labor rates, material availability, and cost of living in the Boston metro area.
Frequently Asked Questions (5)
How localized is the Radon Mitigation estimate for Boston, MA?
This page applies a Northeast regional cost model plus local signals for Boston, MA, so totals are modeled around 15% above a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Boston?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Massachusetts codes and local inspection steps can change both price and schedule compared with national averages.
How much does a radon mitigation system cost?
Most active radon mitigation systems cost $800–3,000 installed. A simple single-suction-point system on a slab or basement runs $900–1,500, crawl-space sub-membrane systems land $1,800–3,000, and complex multi-point installations on split-level homes can reach $3,500–5,000.
Do I need a radon mitigation system?
The EPA recommends action when indoor radon levels are 4 pCi/L or higher; many health authorities recommend mitigation above 2 pCi/L. Test your home — short-term radon test kits cost $20–40, and any home in EPA Zone 1 should be tested every few years and after major foundation work.
How long does a radon mitigation system last?
The PVC venting and sealing typically lasts 20+ years. The radon fan itself is the wear item, with a lifespan of about 5–10 years for standard models and 10–15 for premium ultra-quiet units. Most systems include a manometer that lets homeowners monitor function at a glance.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed April 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching radon mitigation in Boston.
Radon test in a full home inspection
Home Inspection Cost Calculator
Useful when bundling a radon test into the broader pre-purchase inspection.
Radon mitigation with sump pump
Sump Pump Installation Cost Calculator
Helpful when integrating radon depressurization with existing or new sump systems.
Radon plus crawl-space encapsulation
Crawl Space Encapsulation Cost Calculator
Compare two related crawl-space sealing projects often planned together.
Related Calculators
Sump Pump Installation Cost Calculator
Estimate sump pump installation costs by pump type, pit work, backup, and discharge.
Basement Waterproofing Cost Calculator
Estimate basement waterproofing costs by size, method, drainage, sump, and protection scope.
Crawl Space Encapsulation Cost Calculator
Estimate crawl space encapsulation costs by area, liner system, drainage, and dehumidification.