HC
HomeCostCalc.com

Range Hood Installation Cost in Glendale, AZ2026

Estimate range hood installation cost in Glendale, AZ with local labor and material pricing. Compare hood type, venting path, electrical work, and cabinet modifications instantly.

Project Details

Total Estimated Cost

$1,789

Adjusted for local cost of living (-4%)

Cost Breakdown

Range Hood Unit$548
Ducting & Exterior Venting$419
Electrical Work$0
Cabinet / Chimney Modifications$239
Old Unit Removal$120
Installation Labor$463
Installed Hood Cost$1,789

Cost Distribution

Range Hood Unit (31%)
Ducting & Exterior Venting (23%)
Cabinet / Chimney Modifications (13%)
Old Unit Removal (7%)
Installation Labor (26%)

Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Glendale, AZ) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.

Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.

Typical Project Cost by Range Hood Type

Adjusted for Glendale, AZ (-4%)

Same default project size (default scope), priced across each material tier.

TierMaterial rateTotal projectInstalled per hood
Basic Under-Cabinet Hood$219$1,460$1,460
Chimney / Wall-Mount Hood$548$1,789$1,789
Insert / Liner Hood$847$2,088$2,088
Premium Pro-Style Canopy Hood$1,446$2,687$2,687

Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.

Recent Cost Trends Affecting Glendale

Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.

Residential Construction PPI — Trailing 12 Months

BLS series PCU236211236211, single-family construction producer prices.

200.6

+4.0% vs May 25

192194197199202192.9200.6May 25Jul 25Sep 25Nov 25Jan 26Mar 26

The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.

Local Labor Rates Near Glendale, AZ

State-level mean hourly wages from BLS OEWS, May 2023.

TradeSOCMean hourly (AZ)vs nationalLoaded billing rate
Plumbers & PipefittersMost relevant47-2152$28.24-14.0%~$68/hr
CarpentersMost relevant47-2031$25.34-12.5%~$61/hr
Electricians47-2111$30.94-3.9%~$74/hr
HVAC Mechanics49-9021$26.71-6.8%~$64/hr
Painters47-2141$21.83-11.9%~$52/hr
Roofers47-2181$21.07-18.6%~$51/hr
Construction Laborers47-2061$21.12-7.3%~$51/hr

"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.

Best Months to Schedule Interior painting in Glendale, AZ

Derived from NOAA climate normals for AZ: heating/cooling degree days, freeze months, and annual precipitation.

Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec

Why these months

Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.

Booking tip

Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.

Range Hood Installation Cost by City

Browse all 202 cities by state
National Average

Alaska

Delaware

District of Columbia

Hawaii

Idaho

Maryland

Massachusetts

Mississippi

Nebraska

New Hampshire

New Mexico

North Dakota

Rhode Island

Vermont

West Virginia

Wyoming

Local Market Context for Glendale, AZ

This Glendale page currently uses modeled local pricing based on west regional CPI, state-level Census signals, metro premium assumptions, and the same project formulas used across the rest of the site.

Relative cost level

4% below national

This reflects the city multiplier currently applied to labor-sensitive project costs.

Local data source

Modeled regional CPI

This city currently uses regional CPI, state housing data, and metro premium modeling.

Market profile

West · 248K city population

Region and city size help explain labor pressure, contractor demand, and housing-stock mix.

Average Cost in Glendale, AZ

For a typical range hood installation scenario in Glendale, AZ, this calculator currently models a total around $1,789, or about $1,789 per hood.

When budgeting Range Hood Installation in Glendale, local quotes usually reflect conditions across Arizona. Monsoon moisture, UV exposure, and cooling-season demand often shape project scheduling and material choices in Arizona.

Glendale pricing still tracks West labor signals, even when the local contractor pool is smaller.

Quotes around Glendale, AZ often tighten once demolition exposes hidden water damage, subfloor issues, or non-compliant plumbing.

Local conditions in Glendale, AZ include very hot, dry summers with intense UV exposure, which often shows up in material choices and scheduling.

Glendale's newer housing profile (newer stucco and tile-roof construction) usually means fewer surprises behind the walls than in older Northeast and Midwest stock.

In Glendale, modeled costs are currently about 4% below the national baseline. That usually reflects a mix of smaller metro labor pricing, subcontractor availability, and broader west regional cost pressure.

Range hood installation in Glendale usually depends on whether the hood is recirculating or vented, how far the duct run goes, and whether cabinet or electrical changes are needed around the cooktop wall.

Low / Mid / High Project Scenarios

Low Scenario

$862

$862 per hood

A basic recirculating under-cabinet hood replacement with no added electrical work.

Mid Scenario

$1,793

$1,793 per hood

A standard wall-mount hood with short vent run and light cabinet trim adjustments.

High Scenario

$5,573

$5,573 per hood

A premium pro-style hood with long duct run, new circuit, and custom finish carpentry.

What Changes the Estimate Most in Glendale?

  • Venting scope is usually the biggest driver, especially when the job moves from recirculating to a new wall or roof termination.
  • Hood type matters because larger insert and pro-style systems add both appliance cost and installation complexity.
  • Electrical and finish carpentry are the main reasons a hood project grows beyond the price of the unit itself.

When This Calculator Is Less Accurate

This calculator is less accurate when the project includes makeup-air systems, commercial-grade ventilation design, long specialty duct runs, structural framing changes, or high-end custom hood enclosures.

Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.

How Much Does Range Hood Installation Cost in Glendale?

Range hood installation often costs about $600-4,500 installed depending on the hood type, whether the unit vents outside, the duct run length, cabinet modifications, and any electrical work needed. Recirculating replacements are usually the cheapest, while pro-style hoods with new roof or wall venting cost much more.

Cost Factors:

  • Hood type matters because basic under-cabinet units cost less than chimney, insert, or pro-style canopy models
  • Venting is often the biggest swing factor; a recirculating setup is far simpler than cutting a new wall or roof termination
  • Electrical work can add cost when the hood location lacks a proper outlet or needs a new dedicated circuit
  • Cabinet and chimney modifications matter because inserts, wood surrounds, and custom chimney enclosures add carpentry time
  • Removing an old microwave-hood combo or reworking finished surfaces can increase the total beyond the appliance itself

In Glendale, home improvement costs are 4% below the national average. This reflects local labor rates, material availability, and cost of living in the Glendale metro area.

Frequently Asked Questions (5)
How localized is the Range Hood Installation estimate for Glendale, AZ?

This page applies a West regional cost model plus local signals for Glendale, AZ, so totals are modeled around 4% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.

What should I verify with contractors in Glendale?

Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Arizona codes and local inspection steps can change both price and schedule compared with national averages.

How much does range hood installation cost?

A range hood installation often lands around $600-4,500 installed depending on the hood style, venting path, electrical work, and finish carpentry. Direct replacements cost less than first-time vented installs with new ducting.

Is vented range hood installation worth it?

Often yes, especially if you cook frequently or use gas. A properly vented hood removes heat, grease, moisture, and odors more effectively than a recirculating model, but it costs more because ducting and exterior vent terminations must be installed correctly.

Do I need an electrician for a range hood?

Not always, but you may need one if there is no existing outlet, if the circuit is undersized, or if local code requires electrical upgrades. Many hood replacements reuse existing power, while new installations sometimes need added electrical work.

Data sources & methodology

Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.

Read the full methodology →