Range Hood Installation Cost in Phoenix, AZ2026
Estimate range hood installation cost in Phoenix, AZ with local labor and material pricing. Compare hood type, venting path, electrical work, and cabinet modifications instantly.
Project Details
Total Estimated Cost
$1,601
Adjusted for local cost of living (-43%)
Cost Breakdown
Cost Distribution
Data sources: Base costs derived from national industry cost surveys and contractor pricing data, adjusted with BLS inflation indices, Census housing/income signals, and FRED CSV fallback when BLS data is temporarily unavailable. Regional adjustment (Phoenix, AZ) based on U.S. Bureau of Labor Statistics Consumer Price Index data. Latest index refresh: June 2026.
Disclaimer: Estimates are approximate and for informational purposes only. Actual costs vary based on project complexity, contractor rates, material availability, and local market conditions. Always obtain multiple quotes from licensed contractors before starting a project.
Typical Project Cost by Range Hood Type
Adjusted for Phoenix, AZ (-43%)Same default project size (default scope), priced across each material tier.
| Tier | Material rate | Total project | Installed per hood |
|---|---|---|---|
| Basic Under-Cabinet Hood | $219 | $1,272 | $1,272 |
| Chimney / Wall-Mount Hood | $548 | $1,601 | $1,601 |
| Insert / Liner Hood | $847 | $1,900 | $1,900 |
| Premium Pro-Style Canopy Hood | $1,446 | $2,499 | $2,499 |
Material rates reflect the latest BLS construction PPI adjustment. Installed totals include labor and supplies but exclude permits and any tear-out beyond the calculator's default scope.
Recent Cost Trends Affecting Phoenix
Wholesale construction prices typically lead homeowner-facing quotes by 2–4 months. Use the trend below to decide whether to pull a project forward or wait for the next reading.
Residential Construction PPI — Trailing 12 Months
BLS series PCU236211236211, single-family construction producer prices.
200.6
+4.0% vs May 25
The PPI is the wholesale price of materials and labor that contractors pay, before margin. A rising index usually flows into homeowner quotes within 2–4 months. Use this trend to decide whether to pull a project forward or wait.
Local Labor Rates Near Phoenix, AZ
State-level mean hourly wages from BLS OEWS, May 2023.
| Trade | SOC | Mean hourly (AZ) | vs national | Loaded billing rate |
|---|---|---|---|---|
| Plumbers & PipefittersMost relevant | 47-2152 | $28.24 | -14.0% | ~$68/hr |
| CarpentersMost relevant | 47-2031 | $25.34 | -12.5% | ~$61/hr |
| Electricians | 47-2111 | $30.94 | -3.9% | ~$74/hr |
| HVAC Mechanics | 49-9021 | $26.71 | -6.8% | ~$64/hr |
| Painters | 47-2141 | $21.83 | -11.9% | ~$52/hr |
| Roofers | 47-2181 | $21.07 | -18.6% | ~$51/hr |
| Construction Laborers | 47-2061 | $21.12 | -7.3% | ~$51/hr |
"Mean hourly" is the BLS OEWS state-level cross-industry mean wage paid to the worker. Loaded billing rate is a typical 2.4× multiple used in residential bids to cover overhead, insurance, taxes, vehicle, and contractor margin. Use it as a sanity check on a quoted hourly rate.
Best Months to Schedule Interior painting in Phoenix, AZ
Derived from NOAA climate normals for AZ: heating/cooling degree days, freeze months, and annual precipitation.
Why these months
Interior work is climate-independent for cure, but contractors discount in winter because most exterior trades slow down. Booking interior jobs Dec–Feb often nets 5–15% lower quotes.
Booking tip
Ask for a winter or January discount and confirm ventilation if low-VOC paint is required.
Range Hood Installation Cost by City
Browse all 202 cities by state
Alaska
Arkansas
California
Connecticut
Delaware
District of Columbia
Florida
Hawaii
Idaho
Illinois
Indiana
Kansas
Kentucky
Maine
Maryland
Minnesota
Mississippi
New Hampshire
New Jersey
New Mexico
North Carolina
North Dakota
Oklahoma
Pennsylvania
Rhode Island
South Carolina
South Dakota
Texas
Vermont
West Virginia
Wyoming
Local Market Context for Phoenix, AZ
This Phoenix page uses direct metro CPI coverage for local inflation context, then layers in project formulas, state-level housing signals, and current construction inputs.
Relative cost level
43% below national
This reflects the city multiplier currently applied to labor-sensitive project costs.
Local data source
Direct metro CPI
This city has a direct metro inflation series in the market data snapshot.
Market profile
West · 1.6M city population
Region and city size help explain labor pressure, contractor demand, and housing-stock mix.
Compare Nearby Markets
Check the same calculator in nearby or same-region cities to see how the local multiplier changes the estimate.
Range Hood Installation cost in Tucson
Arizona market · mid-size metro · 90 cost index · ~33% higher than Phoenix
Compare Range Hood Installation pricing in Mesa, AZ
Arizona market · mid-size metro · 94 cost index · ~37% higher than Phoenix
Chandler range hood installation estimates
Arizona market · smaller metro · 95 cost index · ~38% higher than Phoenix
How much range hood installation costs in Gilbert
Arizona market · smaller metro · 99 cost index · ~42% higher than Phoenix
Range Hood Installation prices around Glendale
Arizona market · smaller metro · 96 cost index · ~39% higher than Phoenix
Scottsdale, AZ range hood installation budget
Arizona market · smaller metro · 101 cost index · ~44% higher than Phoenix
Local range hood installation estimate for Peoria
Arizona market · smaller metro · 98 cost index · ~41% higher than Phoenix
Range Hood Installation near Tempe
Arizona market · smaller metro · 100 cost index · ~43% higher than Phoenix
Average Cost in Phoenix, AZ
For a typical range hood installation scenario in Phoenix, AZ, this calculator currently models a total around $1,601, or about $1,601 per hood.
When budgeting Range Hood Installation in Phoenix, local quotes usually reflect conditions across Arizona. Arizona's dry heat and intense sun can accelerate material aging, especially on roofing, paint, and exterior coatings.
Phoenix is a large metro where contractor availability and permit volume can move pricing and lead times as much as material choices.
Kitchen and bath remodels near Phoenix, AZ usually move the most when layout changes, plumbing venting, or electrical circuits enter the scope.
Annual weather in Phoenix (14" of rainfall, ~0 freezing months) typically influences both crew scheduling and exterior product specs.
Most Phoenix homes are post-1990s, so quotes can plan against modern code-era plumbing, electrical, and structural systems.
In Phoenix, modeled costs are currently about 43% below the national baseline. That usually reflects a mix of large-metro labor pricing, subcontractor availability, and broader west regional cost pressure.
Range hood installation in Phoenix usually depends on whether the hood is recirculating or vented, how far the duct run goes, and whether cabinet or electrical changes are needed around the cooktop wall.
Low / Mid / High Project Scenarios
Low Scenario
$699$699 per hood
A basic recirculating under-cabinet hood replacement with no added electrical work.
Mid Scenario
$1,605$1,605 per hood
A standard wall-mount hood with short vent run and light cabinet trim adjustments.
High Scenario
$5,344$5,344 per hood
A premium pro-style hood with long duct run, new circuit, and custom finish carpentry.
What Changes the Estimate Most in Phoenix?
- Venting scope is usually the biggest driver, especially when the job moves from recirculating to a new wall or roof termination.
- Hood type matters because larger insert and pro-style systems add both appliance cost and installation complexity.
- Electrical and finish carpentry are the main reasons a hood project grows beyond the price of the unit itself.
When This Calculator Is Less Accurate
This calculator is less accurate when the project includes makeup-air systems, commercial-grade ventilation design, long specialty duct runs, structural framing changes, or high-end custom hood enclosures.
Use the result as a budgeting starting point, then validate with local contractor quotes if the scope includes specialty materials, hidden damage, or permit-driven design changes.
How Much Does Range Hood Installation Cost in Phoenix?
Range hood installation often costs about $600-4,500 installed depending on the hood type, whether the unit vents outside, the duct run length, cabinet modifications, and any electrical work needed. Recirculating replacements are usually the cheapest, while pro-style hoods with new roof or wall venting cost much more.
Cost Factors:
- Hood type matters because basic under-cabinet units cost less than chimney, insert, or pro-style canopy models
- Venting is often the biggest swing factor; a recirculating setup is far simpler than cutting a new wall or roof termination
- Electrical work can add cost when the hood location lacks a proper outlet or needs a new dedicated circuit
- Cabinet and chimney modifications matter because inserts, wood surrounds, and custom chimney enclosures add carpentry time
- Removing an old microwave-hood combo or reworking finished surfaces can increase the total beyond the appliance itself
In Phoenix, home improvement costs are 43% below the national average. This reflects local labor rates, material availability, and cost of living in the Phoenix metro area.
Frequently Asked Questions (5)
How localized is the Range Hood Installation estimate for Phoenix, AZ?
This page applies a West regional cost model plus local signals for Phoenix, AZ, so totals are modeled around 43% below a national baseline before you change inputs. Use it as a budgeting range, then compare written quotes for your exact scope.
What should I verify with contractors in Phoenix?
Confirm permits, HOA or historic-district rules, material lead times, and whether demolition or hidden damage is included. Arizona codes and local inspection steps can change both price and schedule compared with national averages.
How much does range hood installation cost?
A range hood installation often lands around $600-4,500 installed depending on the hood style, venting path, electrical work, and finish carpentry. Direct replacements cost less than first-time vented installs with new ducting.
Is vented range hood installation worth it?
Often yes, especially if you cook frequently or use gas. A properly vented hood removes heat, grease, moisture, and odors more effectively than a recirculating model, but it costs more because ducting and exterior vent terminations must be installed correctly.
Do I need an electrician for a range hood?
Not always, but you may need one if there is no existing outlet, if the circuit is undersized, or if local code requires electrical upgrades. Many hood replacements reuse existing power, while new installations sometimes need added electrical work.
Data sources & methodology
Estimates blend national base costs, the BLS residential construction PPI, regional and direct metro CPI series, BLS OEWS state labor wages, and U.S. Census ACS housing signals. Market data refreshed June 2026. Expect ±15–30% spread vs an actual contractor quote.
Explore Related Project Costs
These are common next-step comparisons for people researching range hood installation in Phoenix.
Range hood inside a full kitchen remodel
Kitchen Remodel Cost Calculator
Useful when ventilation upgrades are being priced with cabinets, counters, and appliances in one broader kitchen scope.
Coordinate hood work with new cabinets
Cabinet Installation Cost Calculator
Compare hood installation with the cabinetry changes that often affect the vent location, surround, and trim details.
Price multiple appliance installs together
Dishwasher Installation Cost Calculator
Helpful when several kitchen appliances are being replaced during the same update cycle.
Related Calculators
Kitchen Remodel Cost Calculator
Estimate kitchen renovation costs from budget refresh to luxury remodel.
Cabinet Installation Cost Calculator
Estimate new cabinet install cost by linear footage, cabinet tier, demolition, finish carpentry, and labor.
Dishwasher Installation Cost Calculator
Estimate dishwasher install cost by model tier, hookups, electrical work, trim, haul-away, and labor.